ASI-Automation Systems Interconnect MPS.2 Data Sheet
Disconnect
with UL94V-0 polyamide
insulating body
• disconnect with special connections
• possibility to perform cross-connections
• available in standard (grey RAL 7042 and beige RAL
1001 colours) or (Ex)i “intrinsic safety” circuits (blue
RAL 5015 colour) versions
• universal mounting onto both PR/DIN and PR/3 type
rails - acc. to IEC 60715 Std., “G32” and “TH/35” types
Opening of the link blade
The /GR tag indicates the grey colour version.
grey version
beige version
(Ex)i version
with cross-connection possibility
and suited to house a ø 2.3 mm test
plug, only in the slot of the crossconnection
MPS.2/SW/GR
Cat. No. MP120GR
MPS.2/SW
Cat. No. MP120
MPS.2/SW (Ex)i
Cat. No. MP130
TECHNICAL CHARACTERISTICS
function / type
rated cross-section (mm2)
connecting capacity
flexible (mm2)
rigid (mm2)
max. flexible with ferrule (mm2)-ferrule type
rated voltage / rated current / gauge co
rated voltage / rated current / AWG
(Ex e) rated voltage / (V) - - rated impulse withstand voltage / pollution degree
insulation stripping length (mm)
tightening torque value (test / recommended) (Nm)
height / width / thickness
height / width / thickness
height / width / thickness
nf. to IEC 60947-7-1
/ tightening torque value UL
TH/35 7,5 mm
TH/35 15 mm
G32
disconnect with cross-connection possibility disconnect with cross-connection possibility
2,5 2,5 2,5
0,2 ÷ 4
0,2 ÷ 4
2,5 - WP25/14
630 V / 18 A / A3
600 V / 20 A / 20-12 AWG / 0,6 Nm
6 KV / 3 6 KV / 3 4 KV / 3
888
0,4 / 0,8 0,4 / 0,8 0,4 / 0,8
43 / 45 / 5,5 43 / 45 / 5,5 43 / 60 / 5,5
51 / 45 / 5,5 51 / 45 / 5,5 51 / 60 / 5,5
47 / 45 / 5,5 47 / 45 / 5,5 47 / 60 / 5,5
with cross-connection possibility and
suited to house a ø 2.3 mm test plug,
in the slot of the cross-connection or
in the head of the tightening screws
MPS.2/SWP/GR
Cat. No. MP710GR
MPS.2/SWP
Cat. No. MP710
0,2 ÷ 4
0,2 ÷ 4
2,5 - WP25/14
630 V / 18 A / A3
600 V / 20 A / 20-12 AWG / 0,6 Nm
with 1 screw and 1 solder connection, 4
x 0.8 mm
(*) value referred
to the staggered
position of the lugs
(A or B)
MPS.2/SV
Cat. No. MP220
disconnect lever with 1 screw and 1 solder connect.
0,2 ÷ 4
0,2 ÷ 4
2,5 - WP25/14
500 V (*) / 18 A / A3
300 V / 20 A / 20-12 AWG / 0,6 Nm
APPROVALS
ACCESSORIES
End sections grey
beige
blue
Permanent cross connection (pre-assembled)
Switchable cross connection
Multiple common bar 250 mm
Shunting screw and sleeve
Coloured partition red, green, white
Cross connection barrier red
Test plug socket
Test plug
Numbering strip
Cover for cross-connection rosso. blu o bianco
Marking tag printed or blank
End bracket
Mounting rail
according to IEC 60715 Std.
+ other approvals referred
to MPS.2/SW standard version
Type Cat. No. Type Cat. No. Type Cat. No.
MPS.2/PT/GR MP121GR
MPS.2/PT MP121
MPS.2/PT (Ex)i MP131
PM/91/2 poles PM912
PM/91/3 poles PM913
PM91/5 poles PM915
PM/91/10 poles PM910
POS/91 POS91 POS/91 POS91 POS/91 POS91
PMP/01 PMP01 PMP/01 PMP01 PMP/01 PMP01
CPM/11 CPM11 CPM/11 CPM11 CPM/11 CPM11
DFU/2 DU02.. DFU/2 DU02.. DFU/2 DU02..
---
PSD/K PD011 PSD/K PD011 PSD/K PD011
SDD/1 DD001 SDD/1 DD001 SDD/1 DD001
SNZ/5 SN001 SNZ/5 SN001 SNZ/5 SN001
PRP/5 PRP05 PRP/5 PRP05 PRP/5 PRP05
CNU/8-CSC NU...-CS... CNU/8-CSC NU...-CS... CNU/8-CSC NU...-CS...
BTU for PR/DIN and PR/3 BT005
BT/DIN/PO for PR/DIN only BT001
BT/3-BTO
for PR/3 only
PR/DIN/AC of steel PR001
PR/DIN/AS same with slots PR004
PR/DIN/AL of aluminium PR002
PR/3/AC for PR/DIN and PR/3 PR003
PR/3/AS
same with slots PR005
BT003-BT007
MPS.2/PT/GR MP121GR
MPS.2/PT MP121
PM/91/2 poles PM912
PM/91/3 poles PM913
PM91/5 poles PM915
PM/91/10 poles PM910
BTU for PR/DIN and PR/3 BT005
BT/DIN/PO for PR/DIN only BT001
BT/3-BTO
for PR/3 only
PR/DIN/AC of steel PR001
PR/DIN/AS same with slots PR004
PR/DIN/AL of aluminium PR002
for PR/DIN and PR/3 PR003
PR/3/AC
PR/3/AS
same with slots PR005
BT003-BT007
-
MPS.2/PT MP121
PM/91/2 poles PM912
PM/91/3 poles PM913
PM91/5 poles PM915
PM/91/10 poles PM910
BTU for PR/DIN and PR/3 BT005
BT/DIN/PO for PR/DIN only BT001
BT/3-BTO
PR/DIN/AC of steel PR001
PR/DIN/AS same with slots PR004
PR/DIN/AL of aluminium PR002
PR/3/AC
PR/3/AS
Distribuzione
DV 27/6
for PR/3 only
for PR/DIN and PR/3 PR003
same with slots PR005
LV 27/6
BT003-BT007
Loading...