ASI
Automation Systems Interconnect, Inc
Innovative Interconnect and Interface Solutions
Screw Clamp Sliding
Link Terminal Block with
Shorting Jumper Functionality
ASI
Automation Systems Interconnect, Inc
Disconnect test terminal block that allows
longitudinal and transversal disconnection.
Configuration provided with test plug
socket downstream and upstream the
slide link, conforming to ENEL LV27/3
specification
Disconnect test terminal block that
allows longitudinal and transversal
disconnection. Configuration provided
with test plug socket upstream and a
short circuit sleeve downstream the
slide link (for short circuit plates type
SCB/6/PO/2 or SCB/6/PO/4, supplied
separately), conforming to ENEL LV27/2
specification
(*) For the simple cross-connection
between adjoining terminal blocks
the multiple common bar shall be
used together with cross-connection
screw and sleeves . The interposing
barrier located in the insulating body
of the term ina l bloc k sha ll be r emov ed
with the ai d of a cutter
(*) See Note
Terminal blocks for
test and measurement
circuits
with UL94V-0 polyamide
insulating body
• universal mounting onto both PR/DIN and PR/3 type rails
- according to IEC 60715 Std., “G32” and “TH/35” types
• available in grey RAL 7042 and beige RAL 1001 colours
grey version
SCB.6/GR
Cat. No. SB200GR
SCB.6/DD/GR
Cat. No. SB210GR
SCB.6/CD/GR
Cat. No. SB220GR
beige version
SCB.6
Cat. No. SB200
SCB.6/DD
Cat. No. SB210
SCB.6/CD
Cat. No. SB220
(Ex)i version
TECHNICAL CHARACTERISTICS
function / type
disconnect by slide-link disconnect by slide-link special
configuration for voltmetric circuits
disconnect by slide-link special
configuration for amperometric circuits
rated cross-section (mm2)
666
connecting capacity
flexible (mm2)
rigid (mm2)
max. flexible with ferrule (mm2)-ferrule type
0,5 ÷ 10
0,5 ÷ 10
6 - WP60/20
0,5 ÷ 10
0,5 ÷ 10
6 - WP60/20
0,5 ÷ 10
0,5 ÷ 10
6 - WP60/20
rated voltage / rated current / gauge co
nf. to IEC 60947-7-1
rated voltage / rated current / AWG
/ tightening torque value UL
800 V / 41 A / A5
600 V / 47 A / 20-8 AWG / 13,3 lb.in.
800 V / 41 A / A5
-
800 V / 41 A / A5
(Ex e) rated voltage / (V) - - rated impulse withstand voltage / pollution degree
8 KV / 3 8 KV / 3 8 KV / 3
insulation stripping length (mm)
12 12 12
tightening torque value (test / max) (Nm)
0,8 / 1,4 0,8 / 1,4 0,8 / 1,4
height / width / thickness
TH/35 7,5 mm
65 / 69 / 8 76 / 69 / 8 77 / 69 / 8
height / width / thickness
TH/35 15 mm
73 / 69 / 8 84 / 69 / 8 85 / 69 / 8
height / width / thickness
G32
68 / 69 / 8 79 / 69 / 8 80 / 69 / 8
APPROVALS
LV 27/4
Distribuzione
DV 27/4
LV 27/3
Distribuzione
DV 27/3
Other approvals referring to terminal block SCB.6
LV 27/2
Distribuzione
DV 27/2
Other approvals referring to terminal block SCB.6
ACCESSORIES
Type Cat. No. Type Cat. No. Type Cat. No.
End sections grey
beige
blue
SCB/6/PT/GR
SB201GR
SCB/6/PT SB201
-
SCB/6/PT/GR
SB201GR
SCB/6/PT SB201
-
SCB/6/PT/GR
SB201GR
SCB/6/PT SB201
Permanent cross connection (pre-assembled)
(*) intrinsically IPXXB protected once mounted)
POF/57
POF57
POF/57
POF57
POF/57
POF57
Switchable cross connection
---
Multiple common bar 250 mm
PMP/13 PMP13 PMP/13 PMP13 PMP/13 PMP13
Shunting screw and sleeve
CPM/57 CPM57 CPM/57 CPM57 CPM/57 CPM57
Coloured partition red, green, white
DFU/6 DU06.. DFU/6 DU06.. DFU/6 DU06..
Cross connection barrier red
---
Test plug socket
PSD/P PD015 - -
Test plug
SDD/2 DD002 SDD/2 DD002 SDD/2 DD002
Numbering strip
---
Cover for cross-connection
---
Short-circuit plate between 2 adjoining terminal blocks
between 4 adjoining terminal blocks
SCB/6/PO/2
SB203
SCB/6/PO/4
SB204
SCB/6/PO/2
SB203
SCB/6/PO/4
SB204
SCB/6/PO/2
SB203
SCB/6/PO/4
SB204
Brass conducting cylinder
SFC/CO FC102 SFC/CO FC102 -
Screw and sleeve
Screw and sleeve with red socket
SCB/6/CPM SB205
SCB/6/CPM/R SB205R
SCB/6/CPM SB205
SCB/6/CPM/R SB205R-SCB/6/CPM/R SB205R
Marking tag printed or blank
CNU/8/51 NU0851 CNU/8/51 NU0851 CNU/8/51 NU0851
End bracket
BTU for PR/DIN and PR/3 BT005
BT/DIN/PO for PR/DIN only BT001
BT/3-BTO
for PR/3 only
BT003-BT007
BTU
for PR/DIN and PR/3 BT005
BT/DIN/PO for PR/DIN only BT001
BT/3-BTO
for PR/3 only
BT003-BT007
BTU
for PR/DIN and PR/3 BT005
BT/DIN/PO for PR/DIN only BT001
BT/3-BTO
for PR/3 only
BT003-BT007
Mounting rail
according to IEC 60715 Std.
PR/DIN/AC of steel PR001
PR/DIN/AS same with slots PR004
PR/DIN/AL of aluminium PR002
PR/DIN/AC of steel PR001
PR/DIN/AS same with slots PR004
PR/DIN/AL of aluminium PR002
PR/DIN/AC of steel PR001
PR/DIN/AS same with slots PR004
PR/DIN/AL of aluminium PR002
PR/3/AC for PR/DIN and PR/3 PR003
PR/3/AS same with slots PR005
PR/3/AC for PR/DIN and PR/3 PR003
PR/3/AS same with slots PR005
PR/3/AC for PR/DIN and PR/3 PR003
PR/3/AS same with slots PR005
The /GR tag indicates the grey colour version.
Innovative Interconnect and Interface Solutions
Loading...