ASI-Automation Systems Interconnect H Series Data Sheet
ASI
Automation Systems Interconnect, Inc
Innovative Interconnect and Interface Solutions
Spring Clamp Sliding Link
Shortening Terminal Block
ASI
Automation Systems Interconnect, Inc
H Series
and test plug
Cat. No. HB200GR
Innovative Interconnect and Interface Solutions
with polyamide insulating body
• UL94V-0
• disconnect by lever and by slide link
• for test and measurement circuits
• mounting onto PR/3 type rails according to IEC 60715
Std., “TH/35” type
• available in standard (grey RAL 7042 colour) or (Ex)i
“intrinsic safety” circuits (blue RAL 5015 colour) versions,
where indicated
The /GR tag indicates the grey colour version.
grey version
(Ex)i version
TECHNICAL CHARACTERISTICS
function / type
rated cross-section (mm2)
connecting capacity
flexible (mm2)
rigid (mm2)
max. flexible with ferrule (mm2)-ferrule type
rated voltage / rated current / gauge co
rated voltage / rated current / AWG
rated impulse withstand voltage / pollution degree
insulation stripping length (mm)
tightening torque value (test / max) (Nm)
height / width / thickness
height / width / thickness
height / width / thickness
APPROVALS
ACCESSORIES
End sections grey
Permanent cross connection
(intrinsically IPXXB protected once mounted)
Rated current carrying capacity of jumper (A)
Cross-connection identification strip (100 mm) green
Diaframma separatore ponti
Internal cross connection
Coloured partition red, green, white
Test plug socket
Test plug
Modular test plug
Numbering strip
Conducting element
End section for modular test plug
Signal element
Screwdriver for the activation of the spring
Screw and sleeve for short circuit plates (with socket)
Short-circuit plate between 2 adjoining terminal blocks
Marking tag printed or blank
End bracket
Mounting rail
according to IEC 60715 Std.
nf. to IEC 60947-7-1
TH/35 7,5 mm
TH/35 15 mm
G32
beige
blue
between 4 adjoining terminal blocks
Please refer to the table on page 136 in order to detemine the
insulation voltage of the different PTC connection diagrams
Terminal block with short circuit plate
and test plug
HMS.2/GR
disconnect by lever disconnect by slide link disconnect by slide link
2,5 4 6
0,2 ÷ 4
0,2 ÷ 4
2,5 - WP25/14
400 V / 16 A / A3
600 V / 24 A / 24-12 AWG
UL
6 KV / 3 6 KV / 3 6 KV / 3
13 13 13
- 6,2 8,2
37 / 66 / 5,2 45 / 86 / 6,2 48 / 97 / 8,2
45 / 66 / 5,2 53 / 86 / 6,2 56 / 97 / 8,2
---
Type Cat. No. Type Cat. No. Type Cat. No.
HMT.2/1+2/PT/GR HM511GR
-
-
PTC/03/02 poles PTC0302
PTC/03/03 poles PTC0303
PTC/03/05 poles PTC0305
PTC/03/10 poles PTC0310
PTC/03/00 (47 poles) PTC0300
24 32 41
- PTC/SP
--DFM/500 DF500
--DFH/2 DH02.. DFH/4 DH04.. -
--PSD/O PD017
SDD/1 DD001 - SDD/1 DD001
SDH/5
CNU/8/51 NU0851 CNU/8/51 NU0851 SHZ/6 SH006
---
SH5/PT
--CCH/2,5-4 CCH02 CCH/2,5-4 CCH02 CCH/6 CCH06
--
--HSCB/6/PO/2
CNU/8/51 NU0851 CNU/8/51 NU0851 CNU/8/51 NU0851
BTU for PR/DIN and PR/3 BT005
BTO BT007
BT/3
---
PR/3/AC of steel PR003
PR/3/AS same with slots PR005
Cat. No. HS200GR
Distribuzione
DV 25/6
DH005
DH501
for PR/3 only
BT003
HSCB.4/GR
Cat. No. HB100GR
0,2 ÷ 6
0,2 ÷ 6
4 - WP40/16
800 V / 32 A / A4
600 V / 30 A / 28-10 AWG
KEMA .KEUR pending
HSCB.4/PT/GR HB101GR
-
-
PTC/5/02 poles PTC0502
PTC/5/03 poles PTC0503
PTC/5/05 poles PTC0505
PTC/5/10 poles PTC0510
PTC/5/00 (40 poles) PTC0500
PTC0990
SDH/6
DH006
SH6/PT DH601 -
for PR/DIN and PR/3 BT005
BTU
BTO BT007
BT/3
for PR/3 only
PR/3/AC of steel PR003
PR/3/AS same with slots PR005
BT003
HSCB.6/GR
Cat. No. HB200GR
0,2 ÷ 10
0,2 ÷ 10
6 - WP60/20
800 V / 41 A / A5
-
Distribuzione
Distribuzione
DV 25
DV 25
UL and cUL pending
UL and cUL pending
HSCB.6/PT/GR HB201GR
-
-
PTC/8/02 poles PTC0802
PTC/8/03 poles PTC0803
PTC/8/05 poles PTC0805
PTC/8/10 poles PTC0810
PTC/8/00 (30 poles) PTC0800
PTC/SP
PTC0990
-
HSCB/6/CPM HB205
HSCB/6/PO/4
BTU
BTO BT007
BT/3
PR/3/AC of steel PR003
PR/3/AS same with slots PR005
HB203
HB204
for PR/DIN and PR/3 BT005
for PR/3 only
BT003
Loading...