ASI-Automation Systems Interconnect HPP Series Data Sheet
HPP Series
mini morsetti serraggio a molla
with polyamide insulating body
• UL94V-0
• mounting onto PR/2 type rails, TH/15 type
• available in standard (grey RAL 7035 colour) or (Ex)i
“intrinsic safety” circuits (blue RAL 5015 colour) versions,
where indicated
The /GR tag indicates the grey colour version.
versione base
versione (Ex)
TECHNICAL CHARACTERISTICS
function / type
rated cross-section (mm2)
connecting capacity
flexible (mm2)
rigid (mm2)
max. flexible with ferrule (mm2)-ferrule type
rated voltage / rated current / gauge co
rated voltage / rated current / AWG
(Ex e) rated voltage / (V) (*) (*)
rated impulse withstand voltage / pollution degree
insulation stripping length (mm)
tightening torque value (test / recommended) (Nm)
height / width / thickness
nf. to IEC 60947-7-1
TH/15 5,5 mm
UL
APPROVALS
ACCESSORIES
End sections grey
Permanent cross connection
(intrinsically IPXXB protected once mounted)
Rated current carrying capacity of jumper (A)
Cross connection identification strip (100 mm) green
Coloured partition red, green, white
Numbering strip
Screwdriver for the activation of the spring
Modular test plug
End section for modular test plug
Test plug
End bracket
Mounting rail
according to IEC 60715 Std.
blue
HMM.2/GR size
SINGLE OR
PARALLEL
EXTENDING
400 400 800 (PT) 500 400
PTC jumper configurations
POLE
SKIPPING
Insulation voltage in the above configurations (V)
ADJACENT
WITHOUT
BARRIER
HPP.2/GR
Cat. No. HP170GR
HPP.2 (Ex)i
Cat. No. HI132
feed-through feed-through
2,5 2,5
0,2 ÷ 4
0,2 ÷ 4
2,5 - WP25/14
800 V / 24 A / A3
600 V / 24 A / 24-12 AWG
8 KV / 3 8 KV / 3
13 13
-35 / 36 / 5,2 30 / 36 / 5,2
Distribuzione
DV 25/1
Type Cat. No. Type Cat. No.
HP/PT/GR HP101GR HPV/PT/GR HV111GR
PTC/03/02
poles PTC0302
PTC/03/03
poles PTC0303
PTC/03/05
poles PTC0305
PTC/03/10
poles PTC0310
PTC/03/00
(47 poles) PTC0300
24 24
PTC/SP
DFP/2
SHZ/2 SH001 SHZ/2 SH001
CCH/2,5-4 CCH02 CCH/2,5-4 CCH02
SDH/5 DH005 SDH/5 DH005
SH5/PT DH501 SH5/PT DH501
SDD/1 DD001 SDD/1 DD001
BT/2 for PR/2 only BT006
-
-
--
PTC0990
DFP2..
ADJACENT
WITH BARRIER
STAGGERED
MODE
PARALLEL
SKIPPING
HP.2/GR
Cat. No. HP150GR
HP.2 (Ex)i
Cat. No. HI130
0,2 ÷ 4
0,2 ÷ 4
2,5 - WP25/14
800 V / 24 A / A3
600 V / 24 A / 24-12 AWG
Distribuzione
DV 25/1
-
PTC/03/02
poles PTC0302
PTC/03/03
poles PTC0303
PTC/03/05
poles PTC0305
PTC/03/10
poles PTC0310
PTC/03/00
(47 poles) PTC0300
PTC/SP
DFP/2
BT/2 for PR/2 only BT006
-
-
PTC0990
DFP2..
Modular test plug
In electrical panels where the space
is particularly limited but there
is nevertheless the requirement
of high cable connection density,
Cabur offers, also in spring-clamp
technology, a series of mini terminal
blocks suited for the connection of
conductors up to 4 mm2.
The range consists of three versions,
for panel mount (by means of screw
or clip) and for the IEC 60715, 15
mm PR/2 rail mount.
The particular configuration of the
insulating body of the three types of
terminal blocks allows the perfect
matching between anyone of them,
even of different versions, in order to
guarantee maximum flexibility.
SUGGESTED COMPOSITION: for
the mounting of terminal boards
formed by terminal blocks type
HPP.2/GR it is highly recommended
to use together HP.2/GR and HPP.2/
GR in a 4 to 1 ratio. Whenever there
is the need to dismount the terminal
board assembled in such a way, it
is recommended to separate each
group composed by a HPP.2/GR and
dismount them one at a time, with
the aid of an appropriate screwdriver
(CCH/2.5-4) and acting in the
appropriate slots of the insulating
wall of the terminal blocks
PR/2/AC of steel PR009
PR/2/AS same with slots PR010
-
Loading...