Page 1
With electronic components
with UL94V-0 polyamide insulating body
• for overlapped circuits
• possibility to perform cross-connections on both lower and upper levels (DAS.4/A and DAS. 4/B;
other versions only on lower level)
•
available in grey RAL 7042 and beige RAL 1001 colours
DAS.4/C terminal block
The /GR tag indicates the grey colour version.
grey version
beige version
(Ex)i version
TECHNICAL CHARACTERISTICS
function / type
rated cross-section (mm2)
connecting capacity
flexible (mm2)
rigid (mm2)
max. flexible with ferrule (mm2)-ferrule type
rated voltage / rated current / gauge co
rated voltage / rated current / AWG
(Ex e) rated voltage / (V) rated impulse withstand voltage / pollution degree
insulation stripping length (mm)
tightening torque value (test / recommended) (Nm)
height / width / thickness
height / width / thickness
height / width / thickness
nf. to IEC 60947-7-1
/ tightening torque value UL
TH/35 7,5 mm
TH/35 15 mm
G32
APPROVALS
ACCESSORIES
End sections grey
Permanent cross connection (pre-assembled)
Switchable cross connection
Multiple common bar 250 mm
Shunting screw and sleeve
Coloured partition red, green, white
Cross connection barrier red
Test plug socket
Test plug
Modular test plug
End section for modular test plug
Numbering strip
Warning plate on adjacent terminal blocks
Cover for cross-connection red, blue o white
Marking tag printed or blank
End bracket
Mounting rail
according to IEC 60715 Std.
beige
blue
DAS.4/.../GR
Cat. No. DS...GR
DAS.4/...
Cat. No. DS...
2-level component-holder
4
0,2 ÷ 6
0,2 ÷ 6
4 - WP40/16
630 V (*) / - / A4
-
8 KV / 3
9
0,5 / 1,2
62 / 64 / 6
70 / 64 / 6
66 / 64 / 6
Approval referring to DAS.4 standard version
Type Cat. No.
DAS/PT/GR DS101GR
DAS/PT DS101
-
PM/41/2 poles PM412
PM/51/3 poles PM513
PM/51/5 poles PM515
PM/51/10 poles PM510
POS/43 POS43
PMP/58 PMP58
CPM/01 CPM01
DFU/7 DU07..
-
PSD/A PD001
SDD/1 DD001
-
SNZ/60 SN007
-
PRP/5 PRP05
CNU/8-CSC NU...-CS...
BTU for PR/DIN and PR/3 BT005
BT/DIN/PO for PR/DIN only BT001
BT/3-BTO
for PR/3 only
PR/DIN/AC of steel PR001
PR/DIN/AS same with slots PR004
PR/DIN/AL
PR/3/AC for PR/DIN and PR/3 PR003
PR/3/AS same with slots PR005
of aluminium PR002
BT003-BT007
DAS.4/A/GR - DAS.4/A
Component: 1 diode
Function: protection against reversal of power
supply polarity
Cat. No. DS111GR - DS111
DAS.4/C/GR - DAS.4/C
Component: 1 diode
Funzione: block of extra current generated by
solenoids as coils, relays, valves,
supplied in d.c.
Cat. No. DS113GR - DS113
DAS.4/E/GR - DAS.4/E
Components: 1 diode + LED resistor
Function: for LAMP/LED test circuits at 24 V
Features: power supply 20÷30 Vd.c.
Cat. No. DS115GR - DS115
DAS.4/L/GR - DAS.4/L
Components: 2 diodes
Function: for LAMP/LED test circuits
Cat. No. DS130GR - DS130
DAS.4/T/GR - DAS.4/T
Components: 1 resistor + 1 greenLED
Function: voltage indicator
Features: power supply 20÷30 Vd.c.
Cat. No. DS128GR - DS128
(*) The voltage and current ratings given for the various versions are
based on the various type of components and to their connections.
DAS.4/B/GR - DAS.4/B
Component: 1 diode
Function: protection against reversal of power
supply polarity
Cat. No. DS112GR - DS112
DAS.4/D/GR - DAS.4/D
Component: 1 diode
Funzione: block of extra current generated by
solenoids as coils, relays, valves,
supplied in d.c.
Cat. No. DS114GR - DS114
DAS.4/I/GR - DAS.4/I
Components: 2 diodes
Function: for LAMP/LED test circuits
Cat. No. DS119GR - DS119
DAS.4/DD/GR - DAS.4/DD
Components: 2 diodes
Function: for LAMP/LED test circuits
Cat. No. DS120GR - DS120
DAS.4/U/GR - DAS.4/U
Components: 1 resistor + 1 greenLED
Function: voltage indicator
Features: power supply 20÷30 Vd.c.
Cat. No. DS129GR - DS129
Loading...