ASI-Automation Systems Interconnect DA100, MF100GR, DA100GR, MF100 Data Sheet
Fuse-holders
with UL94V-0 polyamide
insulating body
• for blade fuse acc. to DIN 72581/3F – ISO 8820
• standard versions available in grey RAL 7042
and beige RAL 1001 colours (where indicated)
• with possibility to insert the “Easy Bridge” multipole cross connection upstream the fuse
• universal mounting onto both PR/DIN and
PR/3 type rails - according to IEC 60715 Std.,
“G32” and “TH/35” types
The /GR tag indicates the grey colour version.
grey version
beige version
(Ex)i version
TECHNICAL CHARACTERISTICS
function / type
rated cross-section (mm2)
connecting capacity
flexible (mm2)
rigid (mm2)
max. flexible with ferrule (mm2)-ferrule type
rated voltage / rated current / gauge co
rated voltage / rated current / AWG
(Ex e) rated voltage / (V) - rated impulse withstand voltage / pollution degree
insulation stripping length (mm)
tightening torque value (test / recommended) (Nm)
height / width / thickness
height / width / thickness
height / width / thickness
nf. to IEC 60947-7-1
/ tightening torque value UL
TH/35 7,5 mm
TH/35 15 mm
G32
APPROVALS
ACCESSORIES
End sections grey
Permanent cross connection
(***) intrinsically IPXXB protected once mounted
Rated current carrying capacity of jumper (A)
Cross-connection identification strip (100 mm) green
Switchable cross connection - Multiple common bar 250 mm - Shunting screw and sleeve - Coloured partition red, green, white
Cross connection barrier red
Test plug socket
Test plug
Modular test plug
End section for modular test plug
Blade-type fuses In = 2 A
according to DIN 72581/3F ISO 8820 In = 5 A
- max voltage 32 V In = 7,5 A
Marking tag printed or blank
End bracket
Mounting rail
according to IEC 60715 Std.
In = 15 A
(*) value referred to the insulation
characteristics of the terminal block
(**) values referred, respectively, to lower
and upper levels
(***) suitable for all the blade fuses with
similar dimensions
(****) separate configuration conf. to IEC
60947-7-3
Terminal block Jumper Insulation voltage in the above configurations (V)
MPFA.4 PTC/4 400 400 400
A.4 PTC/4 400 400
DSF
MPFA.4/GR
Cat. No. MF100GR
MPFA.4
Cat. No. MF100
for blade fuse (***) 2 level - for blade fuse (***) on the upper level
44
0,2 ÷ 6
0,2 ÷ 6
4 - WP40/16
400 V (*) / 15 A (****) / A4
600 V / 6,3 A / 26-10 AWG / 0,5 Nm
6 KV (*) / 3 6 KV / 3
99
0,5 / 1,2 0,5 / 1,2
47 / 47 / 6 68 / 78 / 6
55 / 47 / 6 75 / 78 / 6
51 / 47 / 6 72 / 78 / 6
Approvals referred to the use with CPF/5
fuse carrier cartridge
Type Cat. No. Type Cat. No.
MPS.4/PT/GR
beige
MPS.4/PT
blue
-
PTC/4/02
poles PTC0402
PTC/4/03
poles PTC0403
PTC/4/05
poles PTC0405
PTC04/10
poles PTC0410
PTC/4/00
(42 poles) PTC0400
32 32
PTC/SP
DFU/3 DU03.. DFU/7 DU07..
DFM/500 DF500 DFM/500 DF500
--
--
--
--
F32/2 In = 2 A
F32/5 In = 5 A
F32/7 In = 7,5 A
F32/15 In = 15 A
CNU/8-CSC NU...-CS... CNU/8-CSC NU...-CS...
BTU for PR/DIN and PR/3 BT005
BT/DIN/PO
BT/3-BTO for PR/3 only BT003-BT007
PR/DIN/AC of steel PR001
PR/DIN/AS same with slots PR004
PR/DIN/AL of aluminium PR002
PR/3/AC for PR/DIN and PR/3 PR003
PR/3/AS same with slots PR005
for PR/DIN only BT001
MP901GR
MP901
PTC0990
FN03202
FN03205
FN03207
FN03215
SINGLE OR
PARALLEL
EXTENDING
PTC jumper configurations
POLE
SKIPPING
ADJACENT
WITHOUT
BARRIER
DSFA.4/GR
Cat. No. DA100GR
DSFA.4
Cat. No. DA100
0,2 ÷ 6
0,2 ÷ 6
4 - WP40/16
400 V (*) / 15 A (****) - 32 A (**) / A4
300 V / 6,3 - 30 A / 26-10 AWG / 0,5 Nm
Approvals referred to the use with CPF/5
fuse carrier cartridge
DSS/PT/GR
DSS/PT
-
PTC/4/02
poles PTC0402
PTC/4/03
poles PTC0403
PTC/4/05
poles PTC0405
PTC04/10
poles PTC0410
PTC/4/00
(42 poles) PTC0400
PTC/SP
F32/2 In = 2 A
F32/5 In = 5 A
F32/7 In = 7,5 A
F32/15 In = 15 A
for PR/DIN and PR/3 BT005
BTU
BT/DIN/PO
BT/3-BTO for PR/3 only BT003-BT007
PR/DIN/AC of steel PR001
PR/DIN/AS same with slots PR004
PR/DIN/AL of aluminium PR002
PR/3/AC for PR/DIN and PR/3 PR003
PR/3/AS same with slots PR005
for PR/DIN only BT001
DS301GR
DS301
PTC0990
FN03202
FN03205
FN03207
FN03215
ADJACENT
WITH BARRIER
STAGGERED
MODE
400
MPFA.4 – detail of the terminal blocks with
CNU/8 and SNZ/60 numbering, blade fuse,
view of the PTC/4 and PTC.
The terminal block can be supplied with a
non-polarised LED signal circuit, to detect
the fuse blow-out status.
Two versions are available depending on the
different supply voltages.
MPFA.4/L12 Cat. No.MF112 (with 12 V
non-polarised LED circuit)
MPFA.4/L24 Cat. No.MF124 (with 24 V
non-polarized LED circuit)
DSFA.4 – detail of the terminal blocks
with CNU/8 and SNZ/60 numbering,
blade fuse, view of the PTC/4 jumpers
on the upper level (upstream the fuse)
and on the lower level. The terminal
block can be supplied with a nonpolarised LED signal circuit, to detect
the fuse blow-out status. Two versions
are available depending on the different
supply voltages.
DSFA.4/L12 Cat. No.DA112 (with 12 V
non-polarised LED circuit)
DSFA.4/L24 Cat. No.DA124 (with 24 V
non-polarised LED circuit)
PARALLEL
SKIPPING
Loading...