Passive interfaces
(D-Sub/Terminals
modules) CPD series
• Compact dimensions
C
C
Automation Systems Interconnect, Inc
ASI
Innovative Interconnect and Interface Solutions
A
B
A
B
NOTES BLOCK DIAGRAM
These modules allow the transferirng to the terminals of the deriving
signals on a cable with D-Sub connector type.
The numeration is “pin-to-pin”.
(1) Version available upon request
VERSIONS DIMENSIONS male female
(A x B x C) Item Cat. No. Item Cat. No.
25 poles 57x80x93 (2.24x3.15x3.66 in)
37 poles 77x80x93 (3.03x3.15x3.66 in)
50 poles 92x80x93 (3.62x3.15x3.66 in)
112299151525253737505011229915152525373750
CPD25M XCPD25M CPD25F XCPD25F
CPD37M XCPD37M CPD37F XCPD37F
CPD50M XCPD50M CPD50F XCPD50F
50
GENERAL TECHNICAL DATA
Rated voltage 0...50 Vac / 0...75 Vdc
Rated current 2 A max.
Operating temperature
Protection degree IP00 IEC529; EN60529
Reference Standard IEC 664-1; DIN VDE 0110.1
Pollution degree 2
Overvoltage category II
Housing material polyamide UL94V-0
Connection terminal blocks 2.5 mm
Mounting information vertical on rail adjacent without gap
-20…+60°C
2
fixed screw type (AWG 14)
MOUNTING ACCESSORIES
Mounting rail type according to IEC60715/TH35 PR/3/AC - PR/3/AS
Mounting rail type according to IEC60715/G32 PR/DIN/AC - PR/DIN/AS - PR/DIN/AL
Jumper bridge black —
Loading...