ASI-Automation Systems Interconnect CBC Series Data Sheet
CBC Series
with polyamide
insulating body
●
UL94V-0
●
reduced overall dimension
●
“Easy bridge” system: double possibility to
insert multi-pole cross-connections (PTC),
without the need of additional protection
●
mounting onto PR/3 type rails - according
to IEC 60715 Std., “TH/35” type
Easy Bridge System
The cross-connection can be supplied
in “standard” sizes, for 2-3-5-10 poles,
alternatively in lengths of 250 mm.
1
2
3
4
1-2 - After having cut the bar according to the
number of poles, insert the cross-connection, in the
appropriate groove of the terminal block.
3 - At this point, by using the blade of a
screwdriver, push down the cross-connection
until it reaches its blocking point.
4 - To remove the cross-connection, it is sufficient
to insert the blade of the screwdriver in the slot
provided in the upper part of the jumper itself,
then lift it up and finally extract it.
The jumpers can be used to connect in parallel
terminal blocks having equal cross-section and the
first of the adjoining group of terminal blocks of
different size
.
Multi-pole CBC.2 cross-connection
CBC.4 CBC.2
CBC.4
2 pole CBC.2 cross-connection
CBC.2
The accuracy in the design, allows that terminal blocks having different cross-sections can nevertheless
guarantee visual uniformity once the rail assembly is made.
The “Easy Bridge” connection system guarantees the most diversified transversal connecting
possibilities, even staggered.
DFM/900 DFM/800
DFM/800
DFM/900
CBC02- ponte
DFM/800
CBC Series
with polyamide
insulating body
●
UL94V-0
●
reduced overall dimension
●
“easy bridge” system: multi-pole
cross-connection without the need
to be protected
●
mounting onto PR/3 type rails - according
to IEC 60715 Std., “TH/35” type
standard version
(Ex)i version
TECHNICAL CHARACTERISTICS
function / type
rated cross-section (mm2)
connecting capacity
flexible (mm2)
rigid (mm2)
rated voltage / rated current / gauge conf. to IEC 60947-7-1
rated voltage / rated current / AWG UL - cUL
rated impulse withstand voltage / pollution degree
insulation stripping length (mm)
tightening torque value (test / recommended) (Nm)
position on type MK6703D power screwdriver
pitch (mm)
feed-through
6
0,5 ÷ 10
0,5 ÷ 10
800 V / 41 A / A5
600 V / 50 A / 20-8 AWG
12 kV / 3
10
0,8 / 1,4
1
10
CBC.2-10/PT CB061
CBC.2-10/PT(Ex)i CBI061
PTC/6/02 poles PTC0602
PTC/6/03 poles PTC0603
PTC/6/05 poles PTC0605
PTC/6/10 poles PTC0610
PTC/6/00
42 poles
PTC0600
In=41 A
-
-
DFU/4 DU04..
DFM/800 - DFM/900
DF800-900
-
-
-
SNZ/8 SN004
-
CNU/8 NU...
CSC CS....
BTU for PR/DIN and PR/3 BT005
BT/3 for PR/3 only BT003
PR/3/AC of steel PR003
PR/3/AS same with slots PR005
ACCESSORIES
Type Cat. No.
CBC.2-10/PT CBC061
CBC.2-10/PT(Ex)i CBI061
PTC/10/02 poles
PTC1002
PTC/10/03 poles PTC1003
PTC/10/05 poles
PTC1005
PTC/10/10 poles
PTC1010
PTC/10/00
25 poles
PTC1000
In=57 A
-
-
DFU/4 DU04..
DFM/800 - DFM/900
DF800-900
-
-
-
SNZ/10 SN005
-
CNU/8 NU...
CSC CS....
BTU for PR/DIN and PR/3
BT005
BT/3
for PR/3 only
BT003
PR/3/AC of steel
PR003
PR/3/AS
same with slots
PR005
Type Cat. No.
APPROVALS
CBC.6
cat. No. CBC06
CBC.6 (Ex)i
cat. No. CBI06
CBC.10
cat. No. CBC10
CBC.10 (Ex)i
cat. No. CBI10
feed-through
10
1,5 ÷ 16
1,5 ÷ 16
800 V / 57 A / B6
–
12 kV / 3
12
1,2 / 1,9
1
12
End sections beige
blue
Permanent cross connection (pre-assembled)
Rated current carrying capacity of jumper
Multiple common bar 250 mm
Shunting screw and sleeve
Coloured partition red, green, white
Cross connection barrier red
Test plug socket
Test plug
Composable test plug
Polarising element
End section for composable test plug
Numbering strip
Warning plate on adjacent terminal blocks
Cover for cross-connection
Marking tag printed or blank
End bracket
Mounting rail
according to IEC 60715 Std.
UL, cUL,
pending
SDC
mounted
SDC/P
mounted
SDC - SDC/P
with conductors
-
-
Distribuzione
DV 27/1
Distribuzione
DV 27/1
Loading...