Ashly XR4001, XR1001, XR2001 User Manual

XR-1001
XR-2001
XR-4001

Electronic Crossovers

Operating Manual

Ashly Audio Inc.

847 Holt Road, Webster, NY 14580-9103

Toll Free [phone], Telephone [phone], FAX [phone]

www.ashly.com

All Trademarks referred to herein, are the property of their respective owners. R-042707

All Rights Reserved

Page - 2 Operator Manual – XR Series Crossovers

This page intentionally left blank

Copyright© 2006 – Ashly Audio Inc.

Operator Manual –XR Series Crossovers Page - 3

L
p

Important Safety Instructions

Consignes de sécurité à lire attentivement

Safety Instructions – 3

Introduction – 4

XR Crossovers – 5

Connectors & Cables – 5

Physical Description – 6

Installation – 7

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons. The exclamation point within an equilateral
triangle is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the device.

1. Read these instructions.
Keep these instructions.

2.
Heed all warnings.

3.
Follow all instructions.

4.
To reduce the risk of fire or electric shock, do not expose

5.
this apparatus to rain or moisture.
Do not use this apparatus near water.

6.
Clean only with dry cloth.

7.
Do not block any ventilation openings. Install in

8.
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat

9.
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or

10.
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched

11.
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the

12.
manufacturer.
Use only with the cart, stand, tripod, bracket, or table

13.
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when

14.
unused for long periods of time.
Refer all servicing to qualified service personnel.

15.
Servicing is required when the apparatus has been

e symbole de la flèche dans un triangle équilateral symbolisant la foudre est

révu pour sensibiliser l’utilisateur à la présence de tension de voltage non isolée
à l’intérieur de l’appareil. Elle pourrait constituer un danger de risque de
décharge électrique pour les utilisateurs. Le point d’exclamation dans le triangle
équilatérale alerte l’utilisateur de la présence de consignes qu’il doit d’abord
consulter avant d’utiliser l’appareil.

Lisez ces instructions.

1.
Conservez ces instructions.

2.
Observez les avertissements.

3.
Suivez ces instructions.

4.
Pour réduire le risque de feu ou la décharge électrique,

5.
ne pas exposer cet appareil pour pleuvoir ou l'humidité.
Ne pas utiliser l’appareil près de l’eau.

6.
Le nettoyer à l’aide d’un tissus sec.

7.
Ne pas bloquer les ouvertures de ventilation, installer

8.
selon les consignes du fabricant.
Eloigner des sources de chaleur tel: radiateurs,

9.
fourneaux ou autres appareils qui produisent de la
chaleur.
Ne pas modifier ou amputer le système de la mise à

10.
terre. Une prise avec mise à terre comprend deux lames
dont une plus large ainsi qu’une mise à terre: ne pas la
couper ou la modifier. Si la prise murale n’accepte pas
la fiche, consulter un électricien pour qu’il remplace la
prise désuète.
Protéger le cordon de secteur contre tous bris ou

11.
pincement qui pourraient l’endommager, soit à la fiche
murale ou à l’appareil.
N’employer que les accessoires recommandés par le

12.
fabricant.
N’utiliser qu’avec les systèmes de fixation,chariots,

13.
trépied ou autres, approuvés par le fabricant ou vendus
avec l’appareil.
Débrancher l’appareil lors des orages électriques ou si

14.
inutilisé pendant une longue période de temps.
Un entretient effectué par un centre de service accrédité

15.
est exigé si l’appareil a été endommagé de quelque
façon: si il a été exposé à la pluie,, l’humidité ou s’il ne
fonctionne pas normalement ou qu’il a été échappé.

Typical Applications - 8

Troubleshooting - 10

Dimensions - 10

Specifications - 11

Warranty - 12

This manual uses a

Perpetual Table Of
Contents. Each page

has a copy of the
manual’s contents in a
gray box just like this
one. The section you are
in will always be bold
with the other sections
“grayed out.” The feature
allows you to jump
directly to another
section without having to
return to a Table Of
Contents page..

damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.

All Rights Reserved

Page - 4 Operator Manual – XR Series Crossovers

Safety Instructions – 3

Introduction – 4

About Ashly

XR Crossovers – 5

Connectors & Cables – 5

Physical Description - 6

Installation – 7

Typical Applications - 8

Troubleshooting - 10

Dimensions - 10

Specifications - 11

Warranty - 12

Introduction

Congratulations on your purchase of an Ashly XR Crossover. This crossover is the product
of an intensive research effort which combined a reexamination of traditional crossover
theory with practical field use. Over the years, refinements and new models have been
added to our crossover series, but the original design goals have remained the same: to
produce a crossover which is sonically accurate, is flexible enough to suit a wide variety of
systems, and affords maximum protection for speakers and drivers. Due to the similarity of
the operating controls on our various models, we have prepared this one manual to cover our
complete crossover line

We are confident that you will be pleased with the high performance, superb sound quality,
and reliability that Ashly is known for.

About Ashly

Ashly Audio was founded in 1974 by a group of recording engineers, sound professionals,
and electronics designers. The first products were custom consoles for friends and
associates, but business quickly grew. The philosophy established from the very beginning
holds true today: to offer only the highest quality audio tools at an affordable cost to the
professional user – ensuring reliability and long life. More than thirty years later, Ashly
remains committed to these principles.

Copyright© 2006 – Ashly Audio Inc.