Ashcroft T5500E Specifications
Data Sheet
T5500E Process Gauge with
Integrated Pressure Transmitter
FEATURES
PLUS!™Performance dampens vibration,
shock and pulsation effects
Rugged design
Easily adjusted micrometer pointer
Integrated pressure transmitter
TYPICAL USES
Refineries
Pulp and Paper
Power Plants
Pressure Measurement
Monitoring & Control
PRODUCT SPECIFICATIONS
Temperature Effects: +/-0.3%/ 10K from 0/50°C (32/122°F)
Accuracy: 0.5% of span
Response Time: ≤ 1ms
Repeatability: ≤ +/-0.3% Compound F.S
Range: -30˝ Hg/0 to 0/20,000 psi (-1/0 to 0/1600 bar)
MECHANICAL SPECIFICATIONS
Size: 100mm (4˝)
Sensor Material: 17-4PH SS
Process Connection
Location:
Rating: IP65
Process Connection
Size:
Case Style: Open front with rear blowout disk
Movement: Adjustable
Window Material: Safety glass
Dial: Aluminum
Weight: 2.68 lbs (1.0 kg)
Vent Plug: Top
Pointer: Aluminum (STD.), Micrometer Adjustable (OPT.)
Weather Protection: IP65
Dampening Options: Performance PLUS!™, throttle screw, dampeners,
WETTED COMPONENTS
Bourdon Tube Process Connection Joints
316L SS, Sensor (17-4 PH SS) 316 SS Welded
NON-WETTED COMPONENTS
Case Ring Back Cover
304 SS Bayonet, 304 SS Stainless Steel
Lower
¼ NPT Male, ½ NPT Male
and snubbers
T5500E
4˝ dial size
KEY BENEFITS
• IP65 Protection
• Suitable for aggressive environment and
process fluids
ELECTRICAL SPECIFICATIONS
Power Supply Requirements: Supply Voltage: 12-30 Vdc
Supply Current: Maximum 20mA
Output Signal: 4-20 mA
Isolation Voltage: 350 Vac
Max. Loop Resistance: ≤ (UB – 9.5 V)/0.02 A
Case & Electrical Termination Isolation: > 1 M ohm @ 50 Vdc
MIN/MAX TEMPERATURE LIMITS
Version Ambient Process Storage
Dry
-4°F to 158° F
(-20°C to 70°C)
-13°F to 185°F
(-25°C to 85°C)
-40°F to 185°F
(-40°C to 85°C)
of 41
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
©2018 Ashcroft Inc. T5500E _gauge_ds1.0, Rev. A, 08/18
ashcroft.com
info@ashcroft.com
1.800.328.8258
Data Sheet
T5500E Process Gauge with
Integrated Pressure Transmitter
ORDERING CODE Example:
Dial Size/Model Code
10T5500E - 100mm 304SS case, open front with integrated transmitter 10T5500E
System (tube and process connection)
S - 316L SS S
Case Design
D - Dry D
Process Connection Sizes
02 - ¼" NPT Male 02
04 - ½" NPT Male
Process Connection Location
L - Lower L
Electrical Terminations
F3 - Type B Universal box cable connector (left side mount) F3
M1 - DIN EN 175301-803 angle connector (back mount)
M2 - DIN EN 175301-803 angle connector (left side mount)
Range (coding examples only, see range table on page 3 for all standard ranges)
Single Scales
15# - 15 psi 15#
1KG - 1 kg/cm
1BR - 1 bar
160KP - 160 kilopascal
Options (If choosing an option(s) must include an “X”)
C4 - Individual calibration chart (In accordance with ASME B40.100:2013. Accuracy traceable to N.I.S.T) C4
LL - PLUS!™ Performance
NZ - PLUS!™ Performance, silicone free
MP - Micrometer adjustable
SH - Red set hand, stationary
FF - Front flange with M1 connection only
OS - Overload stop
VS - Underload stop
SG - Safety glass
PD - Acrylic window
YW - 316L SS case
NH - SS tag wired to case
TU - Throttle plug
6B - Cleaned for gasses oxygen service
2
10T5500E
S D 02 L F3 15# XC4
X__
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
©2018 Ashcroft Inc. T5500E _gauge_ds1.0, Rev. A, 08/18
of 42
ashcroft.com
info@ashcroft.com
1.800.328.8258
Loading...