Ashcroft 100 Specifications

Download

Page 1

Type 100 Series Threaded Capsule Diaphragm Seal

Threaded

Capsule

TYPE 100 SHOWN

Design

왘

When isolation of the process from an

nstrument is required, Ashcroft

ffers a

o comprehensive line of diaphragm seals. Seal types include threaded, flanged, in-line threaded, in-line flanged, in-line socket weld, in-line butt weld, saddle and sanitary seals. Also available is a complete offering of isolation or iso-rings and isolation or iso-spools.

APPLICATIONS

• Elevated process temperatures

• Corrosive service

• Isolation of the process for safety

• Suspended solids in the process

• Sanitary connections

• Minimize process dead leg

• Ease of cleaning between batches

FEATURES

• The top housing and diaphragm capsule

are interchangeable with all Ashcroft bottom housings.

• A fill/bleed connection is standard, which

permits filling the seal and instrument simultaneously after evacuation and allows the fill to flow into the completed unit.

• A Viton O-ring, compatible with all stan-

dard fill fluids, and a Teflon back-up ring provide a seal between the diaphragm capsule and the top housing.

• A thin Teflon PTFE gasket between the

diaphragm and bottom housing ensures a leak-tight corrosion resistant seal even at high pressure.

• Top housing and pressure instrument are

removable.

• Continuous-duty design will prevent loss

of process fluid if pressure instrument is removed or fails.

SPECIFICATIONS

Model Number: Type 100, 101, 102, 103, 104,

105, 106, 107, 108

Process Connection Size: See Table A (Pg. 2) Instrument Connection Size: 1⁄

Diaphragm Material: See Table B (Pg. 2)

Bottom Housing Materials: See Table C (Pg. 2)

Filling Fluid: Glycerin, Halocarbon,

OPTIONS Code

316 stainless steel YT top housing

Stainless steel clamp SE rings and flanged ring – includes 300 stainless steel clamping bolts (1500 psi max)

300 series stainless SB steel clamping bolts (max pres is 1500 psi)

Pipe plugs for flushing PU connections – pipe plugs are available in the same materials as bottom housings per Table C (Pg. 2)

5000 psi pressure rating HP Threaded inlet and metal diaphragm only

Welded instrument to DU diaphragm seal

Dual flushing connections DB (1⁄2 NPT) (Limited to 2˝ thru 3˝ flanged seals

Ring joint (Flanged seal only) RJ

Flat face (Flanged seal only) FF

Clean for gaseous oxygen 6B or strong oxidizing agent applications

⁄

2 NPT

Silicone, Styltherm

BULLETIN DS-100

All specifica tions are subject to change without notice. All sales subject to standard terms and conditions . © Ashcroft Inc. 2016 Rev. 01/16

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

Page 2

Ty D

TYPE 100 SERIES THREADED CAPSULE SEAL TYPES

Type 100 –Threaded

⁄4, 1⁄2, 3⁄4, 1 NPT

Type 101 –Threaded

with flushing connection

⁄4, 1⁄2, 3⁄4, 1 NPT

Type 102 – Raised Face Flanged

⁄2,˝ 3⁄4,˝ 1,˝ 11⁄2,˝ 2,˝ 3˝

Type 103 – Raised Face Flanged

⁄2,˝ 3⁄4,˝ 1,˝ 11⁄2,˝ 2,˝ 3

with flushing conection

Type 104 – In-line Threaded

⁄4, 1⁄2, 3⁄4, 1 NPT

Type 105 – Saddle

3,˝ 4˝ pipe only

Type 106 – In-line Flanged

⁄2,˝ 3⁄4,˝ 1,˝ 11⁄2,˝ 2,˝ 3,˝ 4,˝ 6,˝ 8˝

Type 107 – In-line Socket Weld

⁄2,˝ 3⁄4,˝ 1,˝ 11⁄2,˝ 2˝

Type 108 – In-line Butt Weld

⁄4,˝ 1⁄2,˝ 3⁄4,˝ 1,˝ 11⁄2,˝ 2˝

able A – Process Connection/Type Number

Process Connection Size/Code—Inches Type Number Size 1⁄ Process Connection Code 25 50 75 10 15 20 30 40 60 80

Threaded–female NPT • • • • • 100 Threaded–female NPT (with flushing conn.) • • • • • 101

(

Flanged

• • • • • • 102 Flanged (with flushing conn.) • • • • • • 103 In-line—threaded NPT • • • • 104 Saddle • AND LARGER 105 In-line—butt weld • • • • • • 108 In-line—flanged In-line—socket weld • • • • • • 107

Pressure Ratings—All 2500 psi except flanged seals are per ASME B 16.5, temperature limit determined by

iaphragm, bottom housing and/or filling fluid.

Table B – Diaphragm Material

Material Code

316L stainless steel S 304L stainless steel C Monel 400 P N C

antalum U

T Hastelloy B G Hastelloy C 22 Hastelloy C 276 Halar Coated Monel R Gold Plated 304 SS W

Table E – Filling Fluid

Filling Service Connection to Instrument Temperature Range °F Code

Glycerin Pressure Direct Only 0/400 CG Silicone Pressure/Vacuum Direct or Flexible Line –40/500 CK, DJ

Halocarbon

of strong oxidizing agent

Syltherm Pressure/Vacuum Direct or Flexible Line –40/750 HA

Notes:

(1) 150, 300, 600, 900, 1500 & 2500 class flanges. (2) 1˝ 150 thru 8˝ 300 class flanges only. (3) Use on applications where NACE standard

(4) Maximum Press./Temp.

(5) Type 102 only.

Monel is a registered trademark of Huntington Alloys, Inc. Hastelloy is a registered trademark of Cabot Corp. Halocarbon is a registered trademark of Halocarbon Products GYLON 3510 is a registered trademark of Garlock Inc.

(

• • • • • • • • • 106

Table C – Housing Materials

Bottom Code

Steel B 304L SS C

ickel N arpenter 20 D

(3)

(

Pressure/Vacuum in presence

MR-01-75/ISO 1516 w/Sept. 2005 corrigendums.

Threaded: 200 psi/74°F, 125 psi/125°F, 80 psi/150°F. Flanged: 75 psi/100°F.

316L SS S

astelloy B G

astelloy C 22

astelloy C 276

H Carpenter 20 D Monel “400” M Inconel “600” W Nickel N PVC Tantalum clad SS Halar coated SS Teflon flanged steel Kynar Titanium TI

(4)(9)

8)(9)

(

⁄

4 1 1

(

(3)

(5)

(6)

(7)

Direct or Flexible Line –70/300 CF

⁄

2 2 3 4 6 8

Table D – Instrument Connection

Size – NPT Code

J H

V SU BH

T KY

(6) Type 102 only – Temp. Limits: –40/300°F. (7) Only available in 1˝, 1

Max. Press./Temp. – 270 psi and 150°F. Consult factory for conditions beyond these limits.

(8) Maximum Pressure/Temp.: 200 psi and 180°F. (9) Type 100:

weld joint. N/A in 101 or 103 design.

⁄2˝, & 2˝ 150 class, Types 102.

⁄4 or 1⁄2 NPT only. Larger sizes offered with solvent

02T

⁄

04T

⁄

BULLETIN DS-100

HOW TO ORDER:

1. From Table A...select TYPE NUMBER based on process connection, process connection size and diaphragm

2. From Table B...select DIAPHRAGM MATERIAL. (e.g., 316L stainless steel–code S)

3. From Table C...select BOTTOM HOUSING MATERIAL. (e.g., 316 stainless steel–code S)

4. From Table D...select INSTRUMENT CONNECTION size. (e.g., 1⁄4 NPT–code 02T)

5. From Table E...select FILLING FLUID, if diaphragm seal will be attached to instrument. (e.g., Glycerin–code CG)

Typical code: 10–100SS–02T–CG

All specifica tions are subject to change without notice. All sales subject to standard terms and conditions . © Ashcroft Inc. 2016 Rev. 01/16

type/construction. (e.g., Threaded/1˝/capsule–code-10-100)

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

Page 3

A B C

in mm in mm in mm

⁄4 (95) 27⁄8 (73) 1

⁄

(46)

(

wrench flats)

⁄4 NPT for 1⁄4, 1⁄2 & 3⁄4

process connections,

⁄8 NPT for 1.0 NPT

process connections

A B C

⁄4

(95) 2

⁄8

(73) 1

⁄

(46)

Nuts & flange by user

Flange A B

Size Rating # in mm in mm

150 3

⁄2 (89) 215⁄

(75)

⁄2˝ 300 or 600 33⁄4 (95) 3 (76)

900 or 1500 4

⁄4 (121) 33⁄16 (81)

150 3

⁄8 (98) 213⁄16 (71)

⁄4˝ 300 or 600 45⁄8 (117) 3 (76)

900 or 1500 5

⁄8 (130) 33⁄16 (81)

“E”

BOTTOM OF HOUSING TO C OF 1/8 NPT FLUSHING PORT TYPES 103 & 203 ONLY

)

Flange A B C Size Rating # in. mm in. mm in. mm

1 150 4-1/4 (100)

300 or 600 5 (127)

2-9/16 (65) 1-23/32 (69)

103 & 203 only Flange D E Size Rating # in. mm in. mm

1 150

300 or 600

1-5/8 (41)

3/8 (9)

“E”

BOTTOM OF HOUSING TO C OF 1/8 NPT FLUSHING PORT TYPES 103 & 203 ONLY

)

Flange A B C Size Rating # in. mm in. mm in. mm

1 900 or 1500 5-7/8 (149)

2500 6-1/4 (159)

2-7/8 (73) 2-1/4 (57)

103 & 203 only

Flange D E

Size Rating # in. mm in. mm

1 900 or 1500

2500

3-3/8 (86)

3/8 (9)

Nuts, bolts & flange by user

Flange A B C

Size Rating # in mm in mm in mm

150 5 (127) 1

⁄2 (38)

/2˝ 300 or 600 61⁄4 (159) 23⁄8 (61) 11⁄2 (38)

900 or 1500 7

(178) 11⁄2 (38)

150 6 (152) 1

⁄8 (35)

2˝ 300 or 600 6

⁄2 (165) 115⁄16 (49) 11⁄2 (38)

900 or 1500 8

⁄2 (216) 21⁄8 (54)

150 7

⁄2 (191) 2 (51) 15⁄8 (41)

3˝ 300 or 600 8

⁄4 (206) 21⁄16 (52) 17⁄8 (47)

900 or 1500 10

⁄2 (267) 211⁄16 (68) 31⁄4 (82)

Nuts, bolts & flange by user

Flange A B C

Size Rating # in mm in mm in mm

⁄2˝ 150 5 (127) 25⁄16 (59) 113⁄32 (39)

2˝ 150 6

(152) 21⁄8 (54) 19⁄16 (40)

Nuts & flange by user

⁄4 NPT

flushing connection

Flange A B

Size Rating # in mm in mm

150 3

⁄2 (89) 215⁄16 (75)

⁄2˝ 300 or 600 33⁄4 (95) 3 (76)

900 or 1500 4

⁄4 (121) 33⁄16 (81)

150 3

⁄8 (98) 213⁄16 (71)

⁄4˝ 300 or 600 45⁄8 (117) 3 (76)

DIMENSIONS

Type 100 – Threaded

⁄4, 1⁄2, 3⁄4, 1 NPT

Type 100 Series Threaded Capsule Diaphragm Seal

Type 101 –Threaded

⁄4, 1⁄2, 3⁄4, 1 NPT (with flushing conection)

Type 102 – Flanged

⁄2,˝ 3⁄4,˝

Type 102 – Flanged 1˝ (raised face only) one piece bottom housing, with and without flushing connection

Type 102 – Flanged 1˝ (raised face only) two piece bottom housing, 1

⁄2,˝ 2,˝ - PVC, Teflon

and Kynar

Type 102 – Flanged 1˝ (raised face only) one piece bottom housing, with and without flushing connection

Type 103 – Flanged

⁄2,˝ 3⁄4˝ (with flushing conection)

Type 102 – Flanged (raised face only) 11⁄2,˝ 2,˝ 3˝ one piece bottom housing - all materials except PVC, Teflon and Kynar

BULLETIN DS-100

All specifica tions are subject to change without notice. All sales subject to standard terms and conditions . © Ashcroft Inc. 2016 Rev. 01/16

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

Page 4

Nuts, bolts & flange by user

Flushing connection

⁄8 NPT for 11⁄2"

⁄4 NPT for 2" & 3"

Flange A B C Size Rating # in mm in mm in mm

150 5 (127)

⁄2˝ 300 or 600 61⁄4 (159) 3 (76) 21⁄16 (52)

900 or 1500 7

(178)

150 6 (152)

2˝ 300 or 600 6

⁄2 (165) 3

⁄32 (84) 23⁄8 (60)

900 or 1500 8

⁄2 (215)

150 7

⁄2 (191) 33⁄

(79) 27⁄

(56)

3˝ 300 or 600 8

⁄4 (210) 33⁄16 (81) 27⁄32 (57)

900 9

⁄

(241)

⁄32 (94) 23⁄4 (70)

1500 10

⁄2 (267)

Type 100 Series Threaded Capsule

rocess A B C

Connection in mm in mm in mm

⁄4 NPT

25⁄8 (67) 21⁄8 (54)

⁄2 NPT

4 (

102)

⁄8 (92) 23⁄4 (70)

⁄4

NPT 3

⁄8

(98) 3 (76)

1 NPT 3

⁄8 (98) 3 (76)

Top of pipe

A B C D E

in mm in mm in mm in mm in mm

⁄2 (89) 21⁄4 (57) 17⁄8 (48) 13⁄4 (44) 21⁄8 (54)

Top of pipe

A B C D E

in mm in mm in mm in mm in mm

⁄2 (89) 115⁄

(50) 13⁄16 (31) 3 (76) 231⁄32 (75)

Flange A B C Size Rating # in mm in mm in mm

150 7 (178) 3

⁄

(89)

⁄2˝

300 7 (178)

⁄16 (62)

⁄8 (98)

150 7 (178) 4

⁄4 (108)

1˝ 300 8

(203)

⁄16 (62)

⁄8 (123)

150 8 (203) 5 (127)

⁄2 ˝

300 9 (229)

211⁄16 (68)

61⁄8 (155)

150 9 (229) 6 (152)

2˝ 300 10

(254)

⁄16 (75)

⁄2 (165)

150 11 (279) 7

⁄2 (229)

3˝

300 12

(305)

⁄8 (92)

⁄4 (254)

Flange A B C Size Rating # in mm in mm in mm

150 13 (330) 9

(229)

4˝ 300 14

(356)

⁄8 (86)

10 (254)

150 16 (406) 11 (279)

6˝ 300 17

(432)

⁄16 (113)

⁄2 (318)

8˝ 150 16 (406) 5

⁄16 (138) 131⁄2 (343)

Pipe A B Size in mm in mm

⁄4˝ 211⁄32 (60)

⁄2˝, 3⁄4˝ 211⁄32 (60)

1˝ 2

⁄32 (63)

⁄2˝

(102)

⁄32 (69)

2˝ 2

⁄32 (75)

PIPE & WELD BY USER

Diaphragm Seal

DIMENSIONS

Type 103 – Flanged 11⁄2,˝ 2,˝ 3˝ (raised face only)

one piece bottom housing with flushing connection

Type 104 – In-Line Threaded

⁄4, 1⁄2, 3⁄4, 1 NPT

Type 105 – Saddle

3˝ Pipe only

Type 105 – Saddle

4˝ Pipe only

BULLETIN DS-100

Type 106 – In-Line Flanged

⁄2,˝ 1,˝ 11⁄2,˝ 2,˝ 3˝

All specifica tions are subject to change without notice. All sales subject to standard terms and conditions . © Ashcroft Inc. 2016 Rev. 01/16

Type 106 – In-Line Flanged

4,˝ 6,˝ 8˝

Type 107 – In-Line Welded

⁄4,˝ 1⁄2,˝ 3⁄4,˝ 1,˝ 11⁄2,˝ 2˝

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com