Aseptico ALU-40MOM User Manual

OPERATION AND MAINTENANCE

INSTRUCTION MANUAL

ALU-40MOM

ALU-40MOM

PORTABLE

PORTABLE

DENTAL LAMP

DENTAL LAMP

TABLE OF CONTENTS:

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .1

Package Contents . . . . . . . . . . . . . . . . . . . . .1

Safety Precautions . . . . . . . . . . . . . . . . . . . .2

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Maintenance . . . . . . . . . . . . . . . . . . . . . . . 6-7

Parts Lists & Diagrams:

• Figure-9 Lamp Boom . . . . . . . . . . . . . . .8

• Figure-10 Lamp & Pwr Supply . . . . . . .10

• Figure-11 Lamp Head . . . . . . . . . . . . .12

Troubleshooting . . . . . . . . . . . . . . . . . . . . . .14

Specifications . . . . . . . . . . . . . . . . . . . . . . . .15

Symbol Definitions . . . . . . . . . . . . . . . . . . .16

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . .17

P.O. Box 1548 • Woodinville, WA 98072

8333 216

International [phone] • Toll Free [phone]

INFORMATION CONCERNING THE ACCURACY AND
PRECISION OF THIS PRODUCT MAY BE OBTAINED
UPON REQUEST BY CONTACTING ASEPTICO AT THE
ADDRESS SHOWN ON THIS PAGE.

th

Street S.E. Woodinville, WA 98072

www.aseptico.com • [e-mail]

CONFORMS TO UL STD 60601-1;
CERTIFIED TO CSA STD C22.2 NO. 601.1

To prevent injury to people and damage to
property, please heed relevant warnings and
remarks. They are marked as follows:

WARNING: Serious injury or death

may result if ignored.

CAUTION: Damage to property or

the environment may
result if ignored.

NOTE: Important additional

information and hints.

i.

Your new Aseptico ALU-40MOM Lamp is one of the finest operating lights available to
the dental and medical professions. The ALU-40MOM uses an LED light source which
provides brilliant white light, reduced power consumption, and longer operating life.
The universal voltage input Lamp operates from 100VAC to 240VAC, 50 and 60Hz,
and it provides an auxillary DC input that allows 12V and 24V battery operation in the
field. The ALU-40MOM features a compact lamp head with adjustable intensity and
spotlight aperature controls, and a flexible gooseneck.

Congratulations!

This System is engineered to provide many years of reliable service. Please read the
instructions provided in this manual to receive the best and longest service from your
Aseptico equipment.

Separate manuals may be provided to cover the operation and maintenance of
other accessories for your unit.

PACKAGE CONTENTS:

• Portable Dental Lamp Assembly, PN: 12374

• Color Filter, PN: 461974 (For use with light-activated composites.)

• Two 0.160A Spare Fuses, PN: 830046

• 110V Power Cord, PN: 840008

• Operation and Maintenance Manual, PN: 420905

PURCHASED SEPARATELY:

• Table Clamp (Optional), PN: 330590

• DC Battery-Power Clip Assembly (Optional), PN: AA-40DC-BC

• 12Vdc Automobile Power Adapter Assembly (Optional), PN: AA-40DC-LP

• Color Filter 5-Pack (Optional), PN: AA-40FK

• Lens Replacement Kit (Optional), PN: AA-40LK, Includes:

- Fresnel Lens, PN: 461935

- Color Filter, PN: 461974

- Lens Cover, PN: 461936

- Torx Key, PN: 490140 (For removing Fresnel Lens)

- Three (3) Torx Screws, PN: 510727 (For mounting Fresnel Lens)

1

To prevent injury to people and damage to property, please heed relevant warnings and
remarks. They are marked as follows:

WARNING: Serious injury or death may result if ignored.
CAUTION: Damage to property or the environment may result if ignored.
NOTE: Important additional information and hints.

SAFETY PRECAUTIONS:

Aseptico accepts no liability for direct or consequential injury or damage resulting from improper
use, arising in particular through the non-observance of the operating instructions, or improper
preparation and maintenance of this product.

CAUTION: Use for intended purposes only. Failure to observe the operating instructions may

result in the patient or user suffering serious injury or the product being damaged,
possibly beyond repair. Before using this product, make sure that you have studied
and understood the operating instructions.

CAUTION: Use of other Lamp filters or accessories from third-party manufacturers is the sole

responsibility of the user.

CAUTION: All repairs to the LED Assembly, Boom Arm, and Power Supply are to be performed

by authorized Aseptico service personnel only.

WARNING: Do not install where there is a risk of an explosion. The ALU-40MOM is not

intended for operation in the presence of flammable anesthetics or gases.

CAUTION: Connect AC power supply mains cable to a properly grounded outlet only.

CAUTION: The ALU-40MOM Lamp is sensitive to shock and may be damaged if dropped or

impacted against a hard surface.

WARNING: Do not disassemble or alter the Lamp's LED, Boom Arm, or Power Supply

subassemblies.

CAUTION: It is recommended to always have the patient wear darkened eyewear during

dental procedures. Avoid looking directly into the LED when Lamp is turned on.

CAUTION: If the Lens Cover and/or acrylic Fresnel Lens on the Lamp Head needs to be

cleaned, use reagent-grade isopropyl alcohol, professional lens cleaning solution, or
de-ionized water with a small amount of dish soap - do not use other solvents as
they might adversely react with the Lens materials.

CAUTION: The ALU-40MOM is designed to be mounted onto a third-party supplied mounting

stud, 1.13" long and 0.625" in diameter. The mounting stud and support structure
must be strong enough to safely support the lamp.

2

SETTING UP THE UNIT:

Fig. 1 - System Components

LAMP BOOM

BOOM

ADJUSTMENT

HANDLE

POWER

SUPPLY

FLEXIBLE GOOSENECK

VERTICAL POST

Fig. 2 - Power Supply - Bottom View

AC POWER

CONNECTOR

LAMP HEAD

w/ADJUSTABLE

CONTROLS

DC POWER
CONNECTOR

1. Remove the ALU-40MOM Lamp from its

packaging. Set the vertical lamp post on
a suitable mounting stud (supplied
separately). NOTE:

The ALU-40MOM is
designed to be mounted onto a 1.13"
long x 0.625" diameter vertical mounting
stud. The mounting stud and support
structure must be strong enough to
safely support the lamp.

FUSE

COMPARTMENT

ON/OFF
SWITCH

2. Loosen the boom adjustment handle and

extend boom to desired length and/or
pivot the lamp head to the desired
operating position. Tighten handle to
secure the boom in place.

3

SETTING UP THE UNIT

3. Attach power cord to receptacle on
bottom of power supply housing (see
Figure 2, page 3) and plug cord into a
grounded electrical outlet. NOTE:
ALU-40MOM Lamp features auto­sensing, global voltage compatibility for
100VAC, 115VAC, 230VAC, and 240VAC
at 50Hz and 60Hz. The fuses provided
are correct for these line voltages. NOTE:
A USA style 110V power cord is shipped
with the unit. Power plug adapters for the
specific country of usage may need to be
purchased separately.

Optional DC Power:

If the power source is 12VDC or 24VDC,
use the optional DC Battery Clip or
Adapter Assemblies (see Figure 3) to
connect to the DC source. Insert the
Assemblies' Power Plugs into the DC
Power Jack located on the bottom of the
power supply housing (see Figure 2, page

3).

NOTE:

Battery Clips to the battery, connect the
red cable clamp to the positive (+)
terminal, and the black clamp to the
negative (-) terminal.

When attaching the optional DC

- Cont'd

The

Fig. 3 - Optional DC Power Accessories

DC BATTERY CLIP

ASSEMBLY

(Optional)

DC POWER PLUG

ASSEMBLY

(Optional)

4