To prevent injury to people and damage to
property, please heed relevant warnings
and remarks. They are marked as follows:
WARNING: Serious injury or death may
result if ignored.
CAUTION: Damage to property or the
environment may result if
ignored.
NOTE: Important additional
information and hints.
TABLE OF CONTENTS:
Specifications . . . . . . . . . . . . . . . . . . . . . . . .i
Introduction . . . . . . . . . . . . . . . . . . . . . . . . .1
Package Contents . . . . . . . . . . . . . . . . . . . .1
Setting Up the Unit . . . . . . . . . . . . . . . . . . .2
Operation Functions . . . . . . . . . . . . . . . . . .3
Symbol Definitions . . . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Speed Ranges . . . . . . . . . . . . . . . . . . . . . . .4
Troubleshooting . . . . . . . . . . . . . . . . . . . . . .4
Sterilization and Maintenance . . . . . . . . . . .5
Warranty . . . . . . . . . . . . . . . . . . .Back Cover
SPECIFICATIONS:
Console Size: 5.80” x 7.21” x 3.03”
(14.73 cm x 18.31 cm
x 7.70 cm)
Console Weight: 3.0 lbs (1.67 kg)
Power Source: 110V/120V 60Hz or
220V/250V 50Hz
Fuses: 1A/110V
0.5A/220V
Slo Blo Type
CLASSIFICATIONS:
• Internally Powered Equipment
• Type B Equipment
• Ordinary Equipment - degree of protection
against ingress of water
• Not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.
P.O. Box 1548 • Woodinville, WA 98072
8333 216
th
Street S.E. • Woodinville, WA 98072
(425) 487-3157 • (800) 426-5913
www.aseptico.com • info@aseptico.com
i
The UL 2601 Standard Duty Cycle for Intermittent Use is
1 min. on / 5 min. off.
WARNING: This device has been tested and found
to comply with the emissions requirements of EN
55011:1991. These requirements provide reasonable protection against harmful electromagnetic
interference in a typical medical installation.
However, high levels of radio-frequency (RF) emissions from electrical devices, such as cellular
phones, may disrupt the performance of this device.
To mitigate disruptive electromagnetic interference,
position this device away from RF transmitters and
other sources of electromagnetic energy.