Asc SP005 User Manual

SP005 Solar Water Pump Kit Instructions

All Solar Central

www.allsolarcentral.com

Thank you from the entire ASC family for purchasing an ASC solar
product! Please read this entire booklet before assembly.

Package contents:

1 x Water Pump with 16 ft. Cable
1 x LED Light Ring with 16 ft. Cable
1 x Set of Fountain Nozzles
1 x Solar Panel with Battery
1 x Solar Panel Bracket
1 x Extension Tube
1 x Ground Spike

Notes: If there is any damage to the fountain or missing parts, please contact us at 1-626-582-8898 or
www.allsolarcentral.com/contactus

Assembly Steps:

1. Connect the bracket, tubes and spike together. Then attach the solar panel to the bracket. Slide
the holding bracket into the inside lip of the top half of the solar panel frame. The bracket holds
the weight of the solar panel. The solar panel can be adjusted for optimal sunlight by using the
wingnut. Please see the diagram.

1

2. Insert the spike into the ground. Position the solar panel so it’s facing south (in northern
hemisphere) as much as possible to maximize daylight hours. It is important to angle the solar
panel to face the sun when the sun is at its highest point. Ensure the solar panel is not shaded by
trees, shrubs or buildings.

3. Connect the pump, LED Light to the Solar Panel.

IMPORTANT!!

Only the original battery charger (sold separately) should be used as other alternatives may
damage the battery and will void the warranty.

2