ASAP Technology LACA124 User Manual

99.1 0 mm
Begin to charge
Remove any foreign object (if any)
Example: Magnet or holder
Place your smartphone or any Qi-enabled device on charging pad, on either collapsed mode or stand mode
Collapsed mode
Horizontal Vertical
139.6 1 mm
10W Qi Foldable Wireless Charging Pad
Model: WIABLK100008474
PRODUCT GUIDE
November 25, 2019_V1
What is in the box?
. 10W Qi Foldable Wireless Charging Pad . A 5-ft micro-USB to USB charging cable
. 18W QC adapter. User Manual
Get to know your 10W Foldable Qi wireless charging pad
Wireless Charging Pad Input Output Dimension
Compatibility
1.Qi-enabled devices charge up to 10W( 10W for Samsung models, 7.5W for iPhone models, 5W for other Qi-enabled devices).
2.Any Qi-compatible smartphones or devices.
Micro-USB Port
LED Indicator Blue light on for 3 seconds O Blue light on continuously Blue light (flashing)
WIABLK100008474 Micro-USB, DC 5-12V/1.5A Max. 10W/7.5W/5W 136mm*83mm*16mm
LED status indicator
Status Connected to power Stand by for charging Charging device Foreign object detected (Remove it before charging)
We ‘d love to hear from you. Scan with your Walmart app and let us know what you think.
November 25, 2019_V1
6 81 13 1 357 64 7
How to charge your devices.
Connect Micro-USB cable with Charging Pad Insert Micro-USB connector of charging cable to
Micro-USB port of charging pad
Connect to Power Supply
Connect to 18W QC adapter before plugging into power outlet for power supply
18W QC adapter
Micro-USB port
Micro-USB connector
Power outlet
If there is any foreign object detected, LED indicator will be flashing.
**Thick protective case 5mm or a case includes magnet or metallic material, may not allow proper charging function.
Do not place any credit card on the charging device.
Caution Avoid dropping Do not disassemble No metal objects between devices and wireless charging pad. Thick protective case ≥ 5mm or a case includes magnet or metallic material, may not allow proper charging function. Keep wireless charging pad away from any liquids or moisture The maximum ambient temperature during use of this product must not exceed 45°C. Do not place device in fire or other excessively hot environments. Use other non QC3.0 adapter may malfunction. Only use dry cloth or brush to clean this product. Do not use if visible defects are observed on the wireless charging pad. Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Statements This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
Stand mode
Horizontal Vertical
LED status indicator
LED indicator will be on continuously during charging.
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Need help? We’re here for you every day from 7 a.m. – 9 p.m. CST. Give us a call at 1-888-516-2630
Loading...