![](/html/19/1980/198043e3d98fdbdac7b01067bd6dccdf0398054cc96e15bcfa959a62143540cc/bg1.png)
99.1 0 mm
Dual 5W Qi Wireless Charging Pad
Begin to charge
Remove any foreign object (if any)
Example: Magnet or holder
Place your smartphone(s) or any Qi-enabled device on
the center of the charging pad, make sure to cover.
139.6 1 mm
Model: WIAWHT100012443
PRODUCT GUIDE
November 25, 2019_V1
What is in the box?
①. Dual 5W Qi Wireless
Charging Pad
②. A 15W AC adapter
with 5-ft Cable
③. User Manual
Get to know your Dual 5W Qi Wireless Charging Pad
Wireless Charging Pad
Input
Output
Dimension
Compatibility
1.Qi-enabled devices charge up to 5W each side.
2.Any Qi-compatible smartphones or devices.
Power Barrel Connecting Port
LED Indicator
Blue light on for 3 seconds
O
Blue light on continuously
Blue light (flashing)
①
③ ②
WIAWHT100012443
9V/1.67A
5W per coil, total 10W Max
170mm*86mm*11.6mm
LED status indicator
Status
Connected to power
Stand by for charging
Charging device
Foreign object detected
(Remove it before charging)
We ‘d love to hear from you.
Scan with your Walmart
app and let us know what
you think.
November 25, 2019_V1
6 81 13 1 357 71 5
How to charge your devices.
Connect 15W AC Adapter with Charging Pad.
Insert power barrel connector to the connecting port
of the charging pad.
Power Barrel Connecting
Connect to Power Supply.
Plug in 15W AC adapter into power outlet for power
supply.
15W AC adapter
Power outlet on wall
If there is any foreign object detected, LED
indicator will be flashing.
**Thick protective case ≥ 5mm or a case includes
magnet or metallic material, may not allow proper
charging function.
Do not place any credit card on the charging device.
Caution
Avoid dropping
Do not disassemble
No metal objects between devices and wireless
charging pad.
Thick protective case ≥ 5mm or a case includes magnet
or metallic material, may not allow proper charging
function.
Keep wireless charging pad away from any liquids or
moisture
The maximum ambient temperature during use of this
product must not exceed 45°C. Do not place device in
fire or other excessively hot environments.
Only use dry cloth or brush to clean this product.
Do not use if visible defects are observed on the
wireless charging pad.
Warning
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate this equipment.
FCC Statements
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received
including interference that may cause undesired
operation
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
*Can charge up to 2 devices at the same time.
LED indicator will be on continuously during charging.
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and
receiver
Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected
Consult the dealer or an experienced radio/TV
technician for help
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator and your
body. This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.
Need help?
We’re here for you every day from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630
LED status indicator