ASAP Technology LACA073 User Manual

9 9 . 1 0 m m

• Avoid dropping.

• Do not disassemble.

What is included?

• Wireless Charging Pad

• A 3/914mm Micro-USB cable

• A 18W AC QC Adaptor

Specificaons

• Wireless Charging Pad

Wireless Charging Pad LED Indicator/Status

How to Charge Your Devices

1 3 9 . 6 1 mm

Micro USB input

LED indicator

2, Put your mobile phone on the wireless charging
pad and ensure its center aligns with the center of

wireless charger.
Note: Using an ultra-thick protecve phone case (≥
5mm) or a case with a magnec/iron is not
recommended as it may affect the wireless
charging funcon.

Cauon

1, Insert the USB end of cable into power adaptor,
and connect Micro-USB end of the cable with the
wireless charger, the blue LED indicator lights up

aer it is connected well.

• No metal object between devices and wireless
charging pad.

• Keep wireless charging pad away from any

liquids or moisture.

• The maximum ambient temperature during use

of this product must not exceed 45°C. Do not
place device in fire or other excessively hot
environments.

• Only use dry cloth or brush to clean this

product.

• Do not use if visible defects are observed on the
wireless charging pad.

Fast Wireless Charging

• This new charger supports 5W and 10W modes

on Android phones.

• Experience wireless charging using the Qi

wireless standard, which delivers up to 7.5W to
your iPhone.

• Leverages quick-charging speeds with up to
10W of power for newer Samsung flagship phone.

NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protecon against harmful interference in a
residenal installaon. This equipment generates

uses and can radiate radio frequency energy and,
if not installed and used in accordance with the

instrucons, may cause harmful interference to
radio communicaons. However, there is no

guarantee that interference will not occur in a

parcular installaon. If this equipment does
cause harmful interference to radio or television
recepon, which can be determined by turning
the equipment off and on, the user is encouraged

to try to correct the interference by one or more
of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separaon between the
equipment and receiver

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected

Warning

Any changes or modificaons not expressly
approved by the party responsible for compliance
could void the user's authority to operate this
equipment.

FCC Statements

This device complies with Part 15 of the FCC Rules
Operaon is subject to the following two
condions
(1) This device may not cause harmful

interference, and

(2) This device must accept any interference
received including interference that may cause
undesired operaon

• Consult the dealer or an experienced radio/TV

technician for help

Note: The manufacturer is not responsible for any

radio or TV interference caused by unauthorized
modificaons to this equipment. Such
modificaons could void the user s authority to
operate this equipment. Changes or modificaons
not expressly approved by the party responsible
for compliance could void the user's authority to
operate the equipment. The distance between
user and products should be no less than 20cm.