Asante Technologies FS4008E, FS4002E, FS4004E, FS4016E User Manual

FriendlyNet 4000E Series
Fast Ethernet Switch
FS4002E/FS4004E FS4008E/FS4016E
User’s Manual
Asanté Technologies and FriendlyNet are trademarks of Asanté Technologies, Inc. Ethernet is a registered trademark of the Xerox Corporation. All brand names and products are trademarks or registered trade­marks of their respective holders.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Operation of this equipment in a residential area is likely to cause interference, in which case, the user, at his or her own risk and expense, will be required to correct the interference.
LIMITED LIFETIME WARRANTY
Subject to the limitations and exclusions below, Asanté warrants to the original end user purchaser that the covered products will be free from defects in title, materials and manufacturing workmanship for as long as you own them. This warranty excludes fans, power supplies and accessories. Asanté warrants that the fans and power supplies will be free from defects in title, materials and manufacturing workmanship for one year from date of purchase.
To take advantage of this warranty, you must contact Asanté for a return materials authorization (RMA) number. The RMA number must be clearly written on the outside of the returned package. Product must be sent to Asanté postage paid. In the event of a defect, Asanté will repair or replace defective product or components with new, refurbished or equivalent product or components as deemed appr opriate by Asanté. The foregoing is your sole remedy, and Asanté's only obligation, with respect to any defect or non-confor­mity.
Asanté makes no warranty with respect to accessories (including but not limited to cables, brackets and fas­teners) included with the covered product, nor to any discontinued product, i.e., product purchased more than thirty days after Asanté has removed such product from its price list or discontinued shipments of such product.
This warranty is exclusive and is limited to the original end user purchaser only. This warranty shall not apply to secondhand products or to products that have been subjected to abuse, misuse, abnormal electrical or environmental conditions, or any condition other than what can be considered normal use. ASANT MAKES NO OTHER WARRANTIES, EXPRESS, IMPLIED OR OTHERWISE, REGARDING THE
É PRODUCTS, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL
ASANT WARRANTIES OR CONDITIONS OF MER CHANTABILITY OR FITNESS FOR A PAR TICULAR PURPOSE ARE HEREBY DISCLAIMED. ASANT TO THE PURCHASE, USE OR INABILITY TO USE THE PRODUCTS IS LIMITED TO A REFUND OF THE PURCHASE PRICE PAID. IN NO EVENT WILL ASANT INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING ECONOMIC LOSS, DAMAGE TO PROPERTY AND, TO THE EXTENT PERMITTED BY LAW, DAMAGES FOR PERSONAL INJURY, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY (INCLUDING NEGLI­GENCE). THESE LIMITATIONS SHALL APPLY EVEN IF ASANTE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR IF THIS WARRANTY IS FOUND TO FAIL OF ITS ESSENTIAL PURPOSE.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limi­tations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from jurisdiction to jurisdiction.
É’S LIABILITY ARISING FROM OR RELATING
É BE LIABLE FOR
É
Table of Contents
Table of Contents ............................................TOC-i
About This Manual ...................................................i
Chapter Contents ..........................................i
Document Conventions ................................ii
Introduction .......................................................... 1-1
FriendlyNet Fast Ethernet Switch .................. 1-1
Features ......................................................... 1-2
Performance Features ...................................1-3
Fast Ethernet and Switching Technology ...... 1-3
Fast Ethernet Technology ........................ 1-3
Switching Technology ............................... 1-4
Switch Supports Network Expansion ........ 1-4
Switch Acts as a Bridge Between Network
Segments ................................................ 1-4
Installation ........................................................... 2-1
Package Contents ......................................... 2-1
Components ................................................... 2-2
FS4002E ................................................... 2-2
FS4004E ................................................... 2-3
FS4008E ................................................... 2-4
FS4016E ................................................... 2-4
Cabling and Voltage Requirements ............... 2-5
Cabling Requirements .............................. 2-5
Voltage Requirements .............................. 2-6
Mounting Configurations ................................ 2-6
Desktop Mounting ..................................... 2-6
Page i
Wall Mounting the FS4002E, FS4004E,
and FS4008E ............................................2-7
Rack Mounting the FS4008E or FS4016E 2-8
Connecting Network Devices .........................2-9
Connecting a PC to the Switch .................2-9
Connecting a Hub or a Switch to the
Asanté Switch .........................................2-10
Connecting a Hub with no Uplink Port to
the Switch ..............................................2-10
Powering on the Switch ................................2-11
FS4002E and FS4004E ..........................2-11
FS4008E and FS4016E ..........................2-11
LED Indicators .....................................................3-1
LED Indicators on the Switch .........................3-1
LED Indicators for Power On ....................3-2
LED Indicators for Port Connections .........3-3
Link LED.............................................. 3-3
100Mbps Operation LED..................... 3-3
FDP LEDs (FS4016E Only)................. 3-3
Activity LEDs ....................................... 3-4
Troubleshooting ............................................... A-1
Specifications ................................................... B-1
Technical Support ............................................ C-1
Contacting Technical Support ..................C-1
Page ii
About This Manual
This manual describes four models of the FriendlyNet Fast Ethernet FS4000E Series Switches:
FS4002E — two-port 10/100Mbps Fast Ethernet Switch FS4004E — four-port 10/100Mbps Fast Ethernet Switch FS4008E — eight-port 10/100Mbps Fast Ethernet Switch FS4016E — sixteen-port 10/100Mbps Fast Ethernet Switch
These models are similar in every respect except for the number of ports and LED indicators (FS4016E only). Therefore, unless otherwise noted, all information provided in this manual is applicable to all.
Chapter Contents
This manual is divided into the following chapters and appendices:
Chapter 1, “Introduction,” describes the FriendlyNet FS4002E, FS4004E, FS4008E and FriendlyNet FS4016E Fast Ethernet Switches and their features
Chapter 2, “Installation,” explains how to install, mount, and apply power to the FriendlyNet Fast Ethernet Switches
Chapter 3, “LED Indicators,” describes how to interpret the LEDs on the FriendlyNet Fast Ethernet Switches’
Appendix A, “Troubleshooting,” explains how to troubleshoot prob­lems by monitoring the FriendlyNet Fast Ethernet Switches’ LEDs
Appendix B, “Specifications,” describes the FriendlyNet Fast Ether­net Switches’ technical specifications
Appendix C, “Technical Support” explains how to contact Asanté Technical Support
Page i
Document Conventions
This manual uses the terms “Switch” (first letter upper case) to refer to the FriendlyNet FS4002E, FS4004E, FS4008E or FS4016E 10/100Mbps Fast Ethernet Switch, and “switch” (first letter lower case) to refer to all other Ethernet switches.
This manual uses the following conventions to convey instructions and information:
Commands and key words are in boldface font.
Note: Noteworthy information, which contains helpful
suggestions or references to other sections in the manual, is in this format.
Important! Significant information that calls attention to
important features or instructions is in this format.
Page ii
1
Introduction
This chapter introduces the Asanté FriendlyNet Fast Ethernet FS4000E Series 10/100Mbps Switches. It also provides an overview of Fast Ethernet and switching technology.
FriendlyNet Fast Ethernet Switch
Thank you for purchasing an Asanté FriendlyNet FS4000E Series Switch. The FriendlyNet FS4000E products are unmanaged 10/100 Fast Ethernet switches. These switches are designed to address increasing network bandwidth needs and to accommodate future network expansion.
Power
Power
100 Mbps FDP Activity Link
12345678
Power
Figure 1-1 FriendlyNet FS4002E
Power
Figure 1-2
1234 5678
Figure 1-3 FriendlyNet FS4008E
9 10 11 12 13 14 15 16
Figure 1-4 FriendlyNet FS4016E
12
1234
FriendlyNet FS4004E
FriendlyNet
8-port 10/100 Fast Ethernet Switch
1234 5678
FriendlyNet
16-port 10/100 Fast Ethernet Switch
2468 1012
1357 911
FriendlyNet
2-port 10/100 Fast Ethernet Switch
FriendlyNet
4-port 10/100 Fast Ethernet Switch
1234
12
10/100Mbps Ports
10/100Mbps Ports
Switched 10/100Mbps Ports
14 16
Switched 10/100Mbps Ports
13 15
FS4002E
or
Uplink
FS4004E
or
Uplink
FS4008E
or
Uplink
or
Uplink
FS4016E
Page 1-1
Introduction
Each Switch features full plug-and-play installation. Indicators include power, link, 10/100Mbps, and activity LEDs for easy monitoring of Switch operation. In addition, the FS4016E switch also features FDP (full- or half-duplex) LED indicators, which provide a visual indication of duplex operation.
For network expansion, each Switch has an uplink port that makes it easy to connect it to another Fast Ethernet switch or to the network backbone.
Features
The FriendlyNet FS4000E Series Switches have the following features:
Compact size — designed for small to large workgroups in space­limited areas; installs on desktop or wall (FS4002E/FS4004E/ FS4008E, optional wall-mount kit for the FS4016E), or installs in a standard 19-inch equipment rack (FS4008E/FS4016E).
Plug-and-play installation Connects from two to sixteen (depends on model) 10Base-T or
100Base-TX segments per switch Provides an uplink selector button for connecting to another network
device without using a crossover cable Automatic speed detection on all ports to determine network speed Full NWay auto-negotiation for half- or full-duplex operation on all
ports Asanté’s Intelligent Forwarding Technology chooses the fastest
packet forwarding method: fragment free or store-and-forward Asanté’s Efficient Data Flow Technology promotes smooth, predict-
able cell transfer which maximizes time sensitive data transmission Allows cascading from any port to any number of switches (limit of
seven chained switches in spanning tree enabled networks). Complies with IEEE 802.3 Ethernet/802.3u Fast Ethernet standard Works with Category 3 or 5 UTP (unshielded twisted-pair) cable Provides power, link, 10/100Mbps operation, and activity or data
LEDs to aid network diagnosis and simple management Ideal for deployment with multiple high-speed servers for dedicated
bandwidth (10Mbps or 100Mbps) workgroups, or as a segmentation device for larger congested networks.
Page 1-2
Performance Features
Performance Features
The FriendlyNet FS4002E, FS4004E, FS4008E and FS4016E have the following performance features:
Asanté’s Intelligent Forwarding Technology feature provides auto­matic fragment free or store-and-forward switching, which ensures data integrity with minimum latency
Asanté’s unique EDF (Efficient Data Flow Technology) minimizes communication delays between ports, which promotes maximum efficiency for time-sensitive business applications such as video and multimedia.
NWay auto-negotiation on all ports automatically senses port speed (10/100Mbps) and negotiates duplex mode (full-duplex or half­duplex)
Data forwarding rate at 100% of wire-speed, or 148,800pps at 100Mbps, 14,880pps at 10Mbps for 64-byte packets
Data filtering at 100% of wire-speed 8K active MAC address entry table per device (self-learning) 4 to 8MB (FS4008E/FS4016E) or 1 to 2MB (FS4002E/FS4004E)
packet buffer per device (dynamically allocated for each port)
Fast Ethernet and Switching Technology
This section provides a brief overview of Fast Ethernet switching technology.
Fast Ethernet Technology
Fast Ethernet, or 100Base-T, represents a non-disruptive, smooth evolution from the current 10Base-T technology.
Fast Ethernet technology:
Extends the 10Mbps Ethernet standard to transmit and receive data at 100Mbps
Maintains the CSMA/CD Ethernet protocol Allows for simple upgrades, since it is compatible with all other
10Mbps Ethernet environments Takes advantage of your company’s existing investment in hardware,
software and personnel training
Page 1-3
Introduction
Switching T echnology
An Ethernet switch is a device that can direct network traffic among several Ethernet and Fast Ethernet networks. A switch increases network capacity and decreases network loading by making it possible for a LAN to be divided into multiple, unique dedicated segments.
Switch Supports Network Expansion
In Fast Ethernet networks, a switch allows chaining of hubs beyond the “two­repeater limit.” A switch can be used to separate the network into different collision domains, which allows expansion beyond the 205 meter diameter limit for 100BASE-TX networks.
Asanté Switches support traditional 10Mbps Ethernet and 100Mbps Fast Ethernet, and are ideal for bridging them without the need for a separate device.
Switch Acts as a Bridge Between Network Segments
A switch acts as a high-speed selective bridge between individual segments. Traffic that needs to go from one segment to another is automatically forwarded by a switch, without interfering with any other segments. This allows the total network capacity to be multiplied while decreasing network loading.
To ensure network reliability, a switch monitors each of its ports for signal quality. The switch automatically disconnects stations transmitting excessive noise, then reconnects them when the problem is resolved. A switch also automatically drops data packets that exceed the maximum allowable length. This prevents a device from blocking the network by transmitting continuous data streams or extra-long packets.
The Asanté switching engine supports automatic fragment free packet forwarding. Fragment free switch mode allows the switch to make the fastest possible switching decisions without forwarding runt packages on the network. The switch automatically drops (or filters) illegally short packets known as
runts , which prevent bad packets from propagating across segments. Runts are
usually the result of packet collisions on a congested network. The Asanté switching engine also supports store and forward switching. It will
automatically choose the safest and fastest method of switching if the source and destination are at the same speed .I f the speeds are different, such as for a 10Mbps workstation connected to a 100Mbps server, the switch will buffer and read the entire packet, perform a data validity check, then forward the packet at the new speed. With Asanté Intelligent Forwarding your FriendlyNet Switch will automatically pick the best and fastest switching method for you.
Page 1-4
Installation
This chapter explains how to install the FriendlyNet Fast Ethernet FS4000E Series Switch Family. It contains the following sections:
Package Contents FriendlyNet Fast Ethernet Switch Components Cabling and Voltage Requirements Mounting Configurations Connecting Network Devices Powering on the Switch
2
Package Contents
The FriendlyNet Fast Ethernet FS4000E Series Switches are shipped with the following items:
(1) FriendlyNet 2-port FS4002E, 4-port FS4004E, 8-port FS4008E or 16-port FS4016E Fast Ethernet Switch
(1) AC power cord for FS4008E or FS4016E (1) Receptacle-mount AC/DC converter for FS4002E or FS4004E) (4) Self-adhesive rubber feet (1) Wall-mount kit (FS4002E, FS4004E and FS4008E only) which
includes two pan-head #10x3/4 screws and two plastic screw anchors (1) Rack-mount kit (FS4008E and FS4016E only) which includes
two rack-mounting brackets and mounting screws (1) User’s Manual (this book)
Page 2-1
Loading...
+ 23 hidden pages