Asante Technologies FR1104-G User Manual

FR1104-G Rear Panel
for your computer’s operating system. Follow the Computer Configuration steps
Determining Network Settings
computers you wish to add to the router. configure additional Mac OS 8 or 9 is now complete. Repeat these steps to The TCP/IP configuration of your computer
the settings.
5. Close the TCP/IP control panel and Save
router looks as follows: dynamic IP address from the Asanté
4. The DHCP screen after receiving a
router looks as follows: dynamic IP address from the Asanté
3. The DHCP screen before receiving a
Using DHCP Server. your Ethernet adapter. In Configure, select
2. In the Connect Via drop-down list, select
computer’s TCP/IP control panel.
1. From the Apple menu, open your
host configuration protocol) feature. configured by the router’s DHCP (dynamic computer so that it can be automatically your current network settings and set up your The following steps explain how to determine
turn on your computers and modem.
3. Connect the power cord to the router then
and network devices. Series routers support up to 253 compters to any LAN port on the router. FR1100 (preferred) or hub using an Ethernet cable uplink a 10/100 Fast Ethernet switch four computers to the router, you can
. If you need to connect more than
Uplink
Tip: FR1100 Series routers support Auto-
or DSL modem to the router’s WAN port.
2. Connect an Ethernet cable from your cable
computers to the router. Repeat the process to connect other ports (numbered 1–4) on the router. computer’s Ethernet port to one of the LAN
1. Connect an Ethernet cable from your
to connect the router to your network: modem and router, then follow these steps Turn off the power to your computers,
Hardware Installation
Apple Mac OS 8 and 9 (See reverse for Mac OS X)
Computer Configuration
FR1104-G Front Panel
3. Configure your router.
or service plans. settings if you ever change routers, computers future reference. You will need to have these Tip: Record your information and save it for
provided for your operating system. specific computer following the instructions
2. Determine the TCP/IP settings for your
1. Install your hardware.
basic steps: Setting up your router requires three
Asanté Makes Networking Simple
Router Configuration
All Operating Systems
The router must be configured to match your Internet service. If you do not know your Internet connection configuration, please contact your Internet Service Provider (ISP).
By default, the router is pre-configured with these settings:
• Automatically set IP addresses for computers on your LAN (connected to the router’s ports 1–4). The router acts as a server for dynamic host configuration protocol (DHCP) and assigns IP addresses in the range 192.168.123.100 through
192.168.123.199
• The default LAN IP address for the router is
192.168.123.254 with a subnet mask of
255.255.255.0
• The Internet service connected to the router’s WAN port uses a dynamic IP address
Note: To configure the router, you will need to use the information you collected when determining network settings (Computer Configuration) for your operating system.
1. Start your browser and type http://192.168.123.254 in the location field. Press Enter.
2. Log in to the router using the default password (“admin”) and click the Log in button.
3. From the top navigation bar, click on the Wizard link.
4. Follow the on-screen instructions.
5. Fill in the network settings using the information gathered during Computer Configuration.
6. When you are finished, click Save. You will be prompted to restart your router for changes to take effect. Click the Restart Router button and follow the prompts. Your router will be restarted and you will have to log in again.
7. Restart all the computers on your network.
8. To verify your Internet connection, try connecting to the www.asante.com website from your web browser.
The basic configuration of your Asanté router is now complete. See the User’s
Manual for additional information on advanced settings.
www.asante.com
© 2004 Asanté Technologies, Inc. Asanté, FriendlyNET and AeroLAN are registered trademarksof Asanté Technologies, Inc. The Asanté logo and Auto-Uplink are trademarks of Asanté Technologies, Inc. All other brand names and products are trademarks or registered trademarks of their respective holders. All features and specifications are subject to change without prior notice. 06-00697-00 (01/04)
FriendlyNET
Faster, Easier, and Safer Networking
Thank you for purchasing an Asanté FriendlyNET FR1100 Series router. This router will allow you to share your high-speed Internet connection with other computers on your network. To ensure smooth operation, you will need to configure the router to match your current Internet Service Provider (ISP).
System Requirements
Before you begin, please verify that you have the following items:
• Valid Internet connection with user name and password.
• Broadband (cable or DSL) modem with a 10BaseT port (PCI-based modems are not supported).
• Network connection for each computer – a 10/100 Fast Ethernet adapter or built-in 10/100 Fast Ethernet port (RJ-45). AsantéFast 10/100 or FriendlyNET 10/100 PCI recommended.
• Network cable from the router to each computer. Unshielded twisted pair (UTP) Category 5 cable is required.
• Supported operating systems: – Apple Mac OS (8, 9 and X) – Microsoft Windows (98, 2000, NT and XP) – Linux/UNIX
• TCP/IP network protocol must be configured for each computer (refer to computer configuration on reverse). Each client must also be configured to accept an IP address from a DHCP server.
• You will also need a web browser to configure the router. Microsoft Internet Explorer or Netscape Communicator version 4 or later is required.
®
••• ••• •••
FR1100 Series Routers
If you have the FriendlyNET FR1104-G wireless router, these items are optional:
• Wireless network connection for each computer. A built-in 802.11b/g (Airport, Wi-Fi) or adapter for each computer. FriendlyNET AeroLAN adapters recommended.
Incompatibilities
Cable or DSL modems using USB or Firewire connections, asymmetrical dual media connections, Home PNA or any other non­Ethernet compatible communication devices are not compatible with the FriendlyNET FR1100 Series routers.
www.asante.com
FR1104-G Cable/DSL 802.11g Wireless Firewall Router with
Integrated 4-Port 10/100 Switch
Computer Configuration
Apple Mac OS X
Computer Configuration
Microsoft Windows XP
The following steps explain how to determine your current network settings and set up your computer so that it can be automatically configured by the router’s DHCP (dynamic host configuration protocol) feature.
1. Go to System Preferences in your Dock.
2. Select Network from the System Preference panel.
3. Select Show: Active Network Ports and select the Ethernet port that is connected to your Asanté router. Uncheck any unused ports. Click Apply Now.
5. Be sure that the TCP/IP tab is selected. Now select Configure: Using DHCP. You will receive the IP address automatically from your DHCP server.
Before receiving the IP address from the
router’s DHCP server, your screen will look like this:
After receiving the IP address from the
router’s DHCP server, your screen will look like this:
The TCP/IP configuration of your computer is now complete. Repeat these steps to configure additional Macs running OS X that you wish to add to the router.
The following steps explain how to determine your current network settings and set up your computer so that it can be automatically configured by the router’s DHCP (dynamic host configuration protocol) feature.
Note: Keep your Windows CD-ROM handy. You may be asked to insert it so that Windows can copy necessary files.
1. From the Start button, select Settings/Control Panel.
2. Click on Network and Internet Connections.
3. Click the Network Connections icon.
4. Double-click on the network.
6. Under the General tab, click the Properties button.
7. Select the Internet Protocol (TCP/IP) and click the Properties button.
8. Select Obtain an IP address
automatically and Obtain DNS server address automatically.
4. Select the connected Ethernet port in Show.
Computer Configuration
Microsoft Windows 95/98/Me
The following steps explain how to determine your current TCP/IP settings and configure them to use DHCP.
Note: Keep your Windows CD handy. You may be asked to insert it so that Windows can copy necessary files.
1. From the Windows Start button, choose Run. In the dialog box, type winipcfg and click OK.
4. From the Windows Start button, choose Settings and select Control Panel. Double-click the Network icon.
5. In the Configuration tab, highlight the TCP/IP protocol line associated with your network card adapter.
6. Click Properties to open the TCP/IP Properties dialog. Click the IP Address tab. Select Obtain an IP address automatically. Click OK.
5. Under the Support tab, click on the Details… button and record your IP settings for future reference.
Computer Configuration
Microsoft Windows 2000/NT
The following steps explain how to determine your current TCP/IP settings and configure them to use DHCP.
Note: Keep your Windows CD handy. You may be asked to insert it so that Windows can copy necessary files.
1. From the Windows Start button, choose
Program > Accessories > Command Prompt.
2. At the command line, type the command ipconfig/all and press Enter.
9. Click OK and restart your computer.
The TCP/IP configuration of your computer is now complete. Repeat these steps to configure additional PCs running Windows XP on your network.
4. Under the General tab, highlight the
Internet Options (TCP/IP) and click the Properties button.
2. Choose your computer’s Ethernet adapter card from the options available in the drop-down list.
Tip: The PPP setting is usually for your dial-up analog modem. Don’t choose this selection.
3. Expand this dialog box by clicking on the
More Info >> button.
Tip: Next to the DNS Servers field, click the
button to show the Secondary DNS (if available).
7. Click OK again. Windows will begin copying files to your computer. Click Yes to restart your computer with the new settings.
The TCP/IP configuration of your computer is now complete. Repeat these steps to configure additional PCs running Windows 95/98/Me on your network.
3. From the Start Button, select
Control Panel/Network and Dial-Up Connections. Double-click on the Local Area Connection.
5. Select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK when
finished. You may be prompted to restart your computer.
The TCP/IP configuration of your computer is now complete. Repeat these steps to configure additional PCs running Windows 2000/NT on your network.
Loading...