Asante Technologies FM2008-9 User Manual

FriendlyNET® FM2008/9

8 port 10/100 Switches with uplink options

Models – 8 ports 10/100 Auto Uplink® MDI/MDI-X with or without
100BaseFX fiber uplinks (multimode 2km)

SNMP/Web/Telnet/Console Management
High Level Quality of Service for delivering Multiservice

technologies (IP Voice, Video, data)

¾ IEEE 802.1p – 2 Queues
¾ Three scheduling schemes with Delay Bound

(First Come First Served, All High Before Low,
Weighted Round Robin)

IEEE 802.1Q VLAN, tagging, port based IVL/SVL,
protocol based and GVRP/GARP supported

IEEE 802.1ad/802.3ad Port Trunking and LACP
Multicast Support – IGMP snooping 1000 Groups
Port Mirroring
Broadcast Storm Control and Broadcast Filtering
Static MAC address support, MAC address filtering
Port Security
Internal Power – 90-240VAC auto-ranging

Desktop, wallmount or 19” Rackmounting

The FM2009 is an 8-port 10/100BaseTX switch with or without an additional 100BaseFX backbone
uplink. The switch supports multimode fiber options for campus, inter-building or connection to
metro backbone. This feature rich switch comes with 19” rackmount brackets and at a price
that’s un-matched by other vendors.

Built as an Enterprise Performance switch the FM2009 is affordable enough to use at the end of a
100BaseFX fiber run for workgroups or Broadband over Ethernet delivery to tenanted buildings or
Fiber to the Home.

The FM2009 switches are engineered for, low cost wo rkgroups as desktop connectivity in small
offices, departmental workgroups in Education and Medium Sized Enterprise with fiber conn ected
backbones to servers or central distribution switches interconnect ed by fiber. With features such
as Port and Protocol based VLAN’s, Class of Service with IGM P multicasting and Port Trunking, this
low cost switch offer highest possible performance.

For Multi-Tenant, Multi Dwelling and Fiber to the Home applications, the FM20 09 is very su itable
as a Tenant Access Device (TAD).

Used in networks that include the Asante IC3524, 3548, and the Asante 35160 backbone fiber
distribution switches, Asante offers an end-to-end, managed fiber solution, which is unequal led.

Asante is a leading provider to the fiber application network user, with the widest range of
managed and unmanaged fiber connected workgroup, desktop, backbone switches and network
cards.

SPECIFICATIONS

Connectors: Fast Ethernet (100BaseTX, 10BaseT): RJ-45

Fiber (100BaseFX): Choice of SC
Console: Serial (RS-232): DB9

Firmware: Reboot to reset defaults; Xmodem and TFTP supported
System: Single chip, low power, non-blocking, store-and-forward, shared memory, embedded 2Mbit

packet memory and 1Mbit control memory.

Console
Out-of-Band Administration: Microsoft HyperTerminal (or equivalent) with COM port to Console Default Console Settings: 9600 baud,
8 data bits, 1 stop bit and no flow control Interface: Menu-driven Configuration: Port status, Port counter statistics, System Information,
Switch settings

Management
SNMP: MIB II and Bridge MIB supported; community strings and Trap management with both Read and Write Web:
Embedded HTTP server for Web Browser management IE5 (or above). Telnet: Supported

Features
Port Trunking: IEEE802.1ad/802.3ad – LACP with load distribution control and failover recovery, Up to four groups can trunk up to 8
ports on an aggregated Bandwidth of 1600Mbps in each group Quality of Service: IEEE802.1Q Quality of Service supported. Class of