AWM950 Troubleshooting Guide
Radio will not turn ON
• Try the reset button.
• Check fuse.
• Check 12V+ on battery wire to radio (GREEN/WHITE wire).
• Check 12V+ on accessory wire to radio (ORANGE/WHITE wire).
• Check Ground.
Radio turns ON, but no sound
• Verify Volume¸ Fader/Balance¸ Mute controls are set correctly (see owners
manual).
• Try RESET button.
• Verify proper speaker selection.
• Verify proper speaker connections.
• Check for shorts or opens on speaker wires.
CD/DVD does not load fully
• Make sure unit has power and no other CD/DVD is currently inside.
CD/DVD does not play correctly
• Check to make sure disc is inserted correctly.
• Verify disc is free from dirt, scratches, etc.
• Check with factory CDs.
• Check factory original CDs for compatibility warnings (due to various copy-
protection, multi-media content, etc).
• Inspect radio’s chassis to verify shipping screw(s) have been removed.
• Disc skips during playback – verify you have not exceeded 30 degrees mounting
angle.
No AM or FM reception
• Verify you are tuned to a valid station.
• Check your antenna connection on rear of stereo.
• Try a different antenna.
DVD plays sound but no video
• Make sure the video cable is routed from the video output (yellow RCA) to the
input on the television.
Unit does not respond to Remote Control
• Verify that you have a clear line of sight for the IR signal.
• Check the batteries.
B. Woods
Tech Services
03.22.07