Page 1
Built
Built----In Oven
BuiltBuilt
KF 839 DGI
KF 839 DGI
KF 839 DGIKF 839 DGI
In Oven
In OvenIn Oven
285450068
Page 2
Important information or useful hints
Warning of hazardous situations with
Warning of electric shock.
Warning of
risk of fire.
Warning of hot surfaces.
Please read this user manual first!
Please read this user manual first!
Please read this user manual first!Please read this user manual first!
Dear Customer,
Thank you for purchasing this Arçelik product. We hope that you get the best results from your product
which has been manufactured with high quality and state-of-the-art technology. Therefore, please read
this entire user manual and all other accompanying documents carefully before using the product and
keep it as a reference for future use. If you handover the product to someone else, give the user manual
as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences between models
will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
about usage.
regard to life and property.
Page 3
TABLE OF CONTENTS
1 Important instructions and warnings
for safety and environment 4
General safety ................................................ 4
Electrical safety .............................................. 4
Product safety ................................................ 5
Intended use .................................................. 6
Safety for children .......................................... 6
Compliance with AEEE regulation and disposal of
waste products ........................................ 7
Package information ....................................... 7
2 General information 8
Overview ....................................................... 8
Package contents ........................................... 8
Technical specifications .................................. 9
3 Installation 10
Before installation ........................................ 10
Installation and connection ........................... 13
Future Transportation ................................... 14
4 Preparation 15
Tips for saving energy .................................. 15
Initial use ..................................................... 15
Time setting ................................................ 15
First cleaning of the appliance ...................... 16
Initial heating .............................................. 16
5 How to operate the oven 17
General information on baking, roasting and
grilling .................................................. 17
How to operate the electric oven .................. 17
Operating modes ......................................... 18
Using the oven clock.................................... 19
Using the keylock ........................................ 20
Using the clock as an alarm ......................... 20
Cooking times table ..................................... 21
How to operate the grill ................................ 21
Cooking times table for grilling ..................... 22
6 Maintenance and care 23
General information ..................................... 23
Cleaning the control panel ........................... 23
Cleaning the oven........................................ 23
Removing the oven door .............................. 23
Removing the door inner glass ..................... 24
Replacing the oven lamp .............................. 25
7 Troubleshooting 26
3/EN
Page 4
1 Important instructions and warnings for safety and environment
This section contains safety
instructions that will help protect from
risk of personal injury or property
damage. Failure to follow these
instructions shall void any warranty.
General safety
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
• Installation and repair procedures
must always be performed by
Authorized Service Agents. The
manufacturer shall not be held
responsible for damages arising
from procedures carried out by
unauthorized persons which may
also void the warranty. Before
installation, read the instructions
carefully.
• Do not operate the product if it is
defective or has any visible
damage.
4/EN
• Control that the product function
knobs are switched off after every
use.
Electrical safety
• If the product has a failure, it
should not be operated unless it
is repaired by the Authorized
Service Agent. There is the risk of
electric shock!
• Only connect the product to a
grounded outlet/line with the
voltage and protection as
specified in the “Technical
specifications”. Have the
grounding installation made by a
qualified electrician while using
the product with or without a
transformer. Our company shall
not be liable for any problems
arising due to the product not
being earthed in accordance with
the local regulations.
• Never wash the product by
spreading or pouring water onto it!
There is the risk of electric shock!
• ever touch the plug with wet
hands! Never unplug by pulling on
the cable, always pull out by
grabbing the plug.
• The product must be unplugged
during installation, maintenance,
cleaning and repairing procedures.
• If the power connection cable for
the product is damaged, it must
be replaced by the manufacturer,
Page 5
its service agent or similary
qualified persons in order to avoid
a hazard.
• The appliance must be installed
so that it can be completely
disconnected from the network.
The separation must be provided
either by a mains plug, or a
switch built into the fixed
electrical installation, according to
construction regulations.
• Rear surface of the oven gets hot
when it is in use. Make sure that
the electrical connection does not
contact the rear surface;
otherwise, connections can get
damaged.
• Do not trap the mains cable
between the oven door and frame
and do not route it over hot
surfaces. Otherwise, cable
insulation may melt and cause
fire as a result of short circuit.
• Any work on electrical equipment
and systems should only be
carried out by authorized and
qualified persons.
• In case of any damage, switch off
the product and disconnect it
from the mains. To do this, turn
off the fuse at home.
• Make sure that fuse rating is
compatible with the product.
Product safety
• The appliance and its accessible
parts become hot during use.
Care should be taken to avoid
touching heating elements.
Children less than 8 years of age
shall be kept away unless
continuously supervised.
• Never use the product when your
judgment or coordination is
impaired by the use of alcohol
and/or drugs.
• Be careful when using alcoholic
drinks in your dishes. Alcohol
evaporates at high temperatures
and may cause fire since it can
ignite when it comes into contact
with hot surfaces.
• Do not place any flammable
materials close to the product as
the sides may become hot during
use.
• During use the appliance
becomes hot. Care should be
taken to avoid touching heating
elements inside the oven.
• Keep all ventilation slots clear of
obstructions.
• Do not heat closed tins and glass
jars in the oven. The pressure
that would build-up in the tin/jar
may cause it to burst.
• Do not place baking trays, dishes
or aluminium foil directly onto the
bottom of the oven. The heat
accumulation might damage the
bottom of the oven.
• Do not use harsh abrasive
cleaners or sharp metal scrapers
5/EN
Page 6
to clean the oven door glass since
they can scratch the surface,
which may result in shattering of
the glass.
• Do not use steam cleaners to
clean the appliance as this may
cause an electric shock.
• Use the shelves as described in
"How to operate the electric
oven".
• Do not use the product if the front
door glass removed or cracked.
• Oven handle is not towel dryer.
Do not hang up towel, gloves, or
similar textile products when the
grill function is at open door.
• Always use heat resistant oven
gloves when putting in or
removing dishes into/from the hot
oven.
• Ensure that the appliance is
switched off before replacing the
lamp to avoid the possibility of
electric shock.
For the reliability of the fire of the
product;
• Make sure the plug is fitting to
socket as well for not cause to
spark.
• Do not use damaged or cutted or
extension cable except the
original cable.
• Make sure that not whether liquid
or moisture on the socket is
pluged to product .
Intended use
• This product is designed for
domestic use. Commercial use
will void the guarantee.
• This appliance is for cooking
purposes only. It must not be
used for other purposes, for
example room heating.
• This product should not be used
for warming the plates under the
grill, drying towels, dish cloths etc.
by hanging them on the oven
door handles. This product should
also not be used for room heating
purposes.
• The manufacturer shall not be
liable for any damage caused by
improper use or handling errors.
• The oven can be used for
defrosting, baking, roasting and
grilling food.
• Service life of your product is 10
years. Manufacturer shall provide
the required spare parts for the
product to perform as defined
during this period.
Safety for children
• Accessible parts may become hot
during use. Young children should
be kept away.
• The packaging materials will be
dangerous for children. Keep the
packaging materials away from
children. Please dispose of all
parts of the packaging according
to environmental standards.
6/EN
Page 7
• Electrical products are dangerous
to children. Keep children away
from the product when it is
operating and do not allow them
to play with the product.
• Do not place any items above the
appliance that children may reach
for.
• When the door is open, do not
not
notnot
load any heavy object on it and do
not
not allow children to sit on it. It
notnot
may overturn or door hinges may
get damaged.
Compliance with AEEE regulation
and disposal of waste products
• This product does not contain
harmful and forbidden materials
described in the "Directive on the
Restriction of the Use of Certain
Hazardous Substances in Waste
Electrical and Electronic
Equipment" (AEEE) issued by the
T.R. Ministry of Environment and
Urbanization.
Complies with the AEEE Directive.
• This product has been
manufactured with high quality
parts and materials which can be
reused and are suitable for
recycling. Therefore, do not
dispose the product with normal
domestic waste at the end of its
service life. Take it to a collection
point for the recycling of electrical
and electronic equipment. Please
consult your local authorities to
learn the nearest collection point.
Help protect the environment and
natural resources by recycling
used products. Before disposing
of the product, cut off the power
cable plug and make the door
lock (if any) unusable to avoid
dangerous conditions to children.
Package information
• Packaging materials of the
product are manufactured from
recyclable materials in
accordance with our National
Environment Regulations. Do not
dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by
the local authorities.
7/EN
Page 8
1 Control panel
2 Wire shelf
3 Tray
4 Handle
5 Door
6 Fan motor (behind steel plate)
7 Lamp
8 Top heating element
9 Shelf positions
1 Function knob
2 Digital timer
3 Thermostat knob
4 Thermostat lamp
Accessories supplied can vary depending on
2 General information
Overview
Package contents
the product model. Not every accessory
described in the user manual may exist on
your product.
1. User manual
User manual
User manualUser manual
2. Oven tray
Oven tray
Oven trayOven tray
Used for pastries, frozen foods and big
roasts.
8/EN
3. Cake tray
Cake tray
Cake trayCake tray
Used for pastries such as cookies and
biscuits.
4. Wire Shelf
Wire Shelf
Wire ShelfWire Shelf
Page 9
Voltage / frequency
220-240 V ~ 50 Hz
Total power consumption
2.4kW
Fuse min. 16 A
Cable type / section
H05VV
-FG
Cable length
max. 2 m
External dimensions (height / width / depth)
455 mm/594 mm/567 mm
Installation dimensions (height / width / depth)
**450 or 460 mm/560 mm/min. 550 mm
Main oven
Multifunction oven
Multifunction ovenMultifunction oven
Multifunction oven
A
Inner lamp
15–25 W
Grill power consumption
2.2 kW
#
Basics: Information on the energy label of electrical ovens is given in accordance with the EN 50304
** See.
Installation, page
10
.
Technical specifications may be changed
without prior notice to improve the quality of
Figures in this manual are schematic and
Values stated on the product labels or in the
Used for roasting and for placing the food to
be baked, roasted or cooked in casserole
dishes to the desired rack.
Technical specifications
3 x 1,5 mm2
Energy efficiency class#
standard. Those values are determined under standard load with bottom-top heater or fan assisted heating
(if any) functions.
documentation accompanying it are
the product.
may not exactly match your product.
obtained in laboratory conditions in
accordance with relevant standards.
Depending on operational and
environmental conditions of the product,
these values may vary.
9/EN
Page 10
Preparation of location and electrical
Prior to installation, visually check if the
Do not install the appliance next to
The door and/or handle must not be used
If the appliance has wire handles, push the
3 Installation
Refer to the nearest Authorised Service Agent for
installation of the product. Make sure that the
electric and gas installations are in place before
calling the Authorised Service Agent to have the
product ready for operation. If not, call a qualified
electrician and fitter to have the required
arrangements made. The manufacturer shall not
be held responsible for damages arising from
procedures carried out by unauthorized persons
which may also void the warranty.
installation for the product is under
customer’s responsibility.
DANGER:
The product must be installed in
accordance with all local electrical
regulations.
DANGER:
product has any defects on it. If so, do
not have it installed.
Damaged products cause risks for your
safety.
Before installation
The appliance is intended for installation in
commercially available kitchen cabinets. A safety
distance must be left between the appliance and
the kitchen walls and furniture. See figure (values
in mm).
• Surfaces, synthetic laminates and adhesives
used must be heat resistant (100 °C
minimum).
• Kitchen cabinets must be set level and fixed.
• If there is a drawer beneath the oven, a
shelf must be installed between oven and
drawer.
• Carry the appliance with at least two
persons.
refrigerators or freezers. The heat emitted
by the appliance will lead to an increased
energy consumption of cooling appliances.
for lifting or moving the appliance.
handles back into the side walls after
moving the appliance.
10/EN
Page 11
* min.
11/EN
Page 12
* min.
12/EN
Page 13
mains supply only by an authorised and
warranty period starts only after correct
Power cable plug must be within easy reach
1 Cooling fan
2 Control panel
3 Door
Installation and connection
• Product can only be installed and connected
in accordance with the statutory installation
rules.
Electrical connection
Connect the product to a grounded outlet/line
protected by a fuse of suitable capacity as stated
in the "Technical specifications" table. Have the
grounding installation made by a qualified
electrician while using the product with or
without a transformer. Our company shall not be
liable for any damages that will arise due to
using the product without a grounding installation
in accordance with the local regulations.
DANGER:
The product must be connected to the
qualified person. The product's
installation.
Manufacturer shall not be held responsible
for damages arising from procedures
carried out by unauthorised persons.
DANGER:
The power cable must not be clamped,
bent or trapped or come into contact
with hot parts of the product.
A damaged power cable must be replaced
by an Authorised Service Agent. Otherwise,
there is risk of electric shock, short circuit
or fire!
• Connection must comply with national
regulations.
• The mains supply data must correspond to
the data specified on the type label of the
product. Open the front door to see the type
label.
• Power cable of your product must comply
with the values in "Technical specifications"
table.
DANGER:
Before starting any work on the
electrical installation, disconnect the
product from the mains supply.
There is the risk of electric shock!
after installation (do not route it above the
hob).
Plug the power cable into the socket.
Installing the product
1. Slide the oven into the cabinet, align and
secure it while making sure that the power
cable is not broken and/or trapped.
Secure the oven with 2 screws as illustrated.
For products with cooling fan
13/EN
Page 14
Cooling fan continues to operate for about
Do not place any objects onto the product
Check the general appearance of your
The built-in cooling fan cools both the built-in
cabinet and the front of the product.
20-30 minutes after the oven is switched
off.
Final check
1. Plug in the power cable and switch on the
product's fuse.
2. Check the functions.
Future Transportation
• Keep the product's original carton and
transport the product in it. Follow the
instructions on the carton. If you do not
have the original carton, pack the product in
bubble wrap or thick cardboard and tape it
securely.
• To prevent the wire grill and tray inside the
oven from damaging the oven door, place a
strip of cardboard onto the inside of the
oven door that lines up with the position of
the trays. Tape the oven door to the side
walls.
• Do not use the door or handle to lift or move
the product.
and move it in upright position.
product for any damages that might have
occurred during transportation.
14/EN
Page 15
Before you can use the oven, the time must
1 Adjustment key
2 Keylock
3 Current time
4 Alarm volume
5 Screen brightness setting
6 Plus key
7 Minus key
8 Alarm symbol
9 End of cooking time
10 Cooking time
11 Program key
While making any adjustment, related
It will increase/move forward from
12:00
if
Current time settings are canceled in case
4 Preparation
Tips for saving energy
The following information will help you to use
your appliance in an ecological way, and to save
energy:
• Use dark coloured or enamel coated
cookware in the oven since the heat
transmission will be better.
• While cooking your dishes, perform a
preheating operation if it is advised in the
user manual or cooking instructions.
• Do not open the door of the oven frequently
during cooking.
• Try to cook more than one dish in the oven
at the same time whenever possible. You
can cook by placing two cooking vessels
onto the wire shelf.
• Cook more than one dish one after another.
The oven will already be hot.
• You can save energy by switching off your
oven a few minutes before the end of the
cooking time. Do not open the oven door.
• Defrost frozen dishes before cooking them.
Initial use
Time setting
be set. If the time is not set, oven will not
operate.
symbols on the clock will flash.
Symbol flashes when the oven is first
powered.
Set time of the day by touching „+“
„+“ or „„„„––––““““ keys.
„+“ „+“
After setting the time, touch the key or wait
for 4 seconds. Its symbol will flash and the
time is set.
After setting the time, you can start and end the
cooking by selecting the desired position with
temperature knob and function knob.
the time of the day is not set. Symbol will
appear on the screen to inform that the
time of the day is not set. The symbol will
disappear once the time is set.
of power failure. It needs to be readjusted.
Changing the time of the day
To change the time of the day you have
previously set,
1. Touch the key to activate the symbol.
2. Set the time of the day by touching ''''––––'''' and
'+"
'+" keys.
'+"'+"
3. After setting the time, touch the key or
wait for 4 seconds.
» Symbol flashes and the time is set.
Changing screen brightness adjustment
1. For screen brightness setting, touch the
key to activate the symbol.
2. Set the desired brightness by touching ''''––––''''
and '+"
'+" keys.
'+"'+"
15/EN
Page 16
The surface might get damaged by some
Do not use harsh abrasive cleaners or sharp
Always use heat resistant oven gloves when
Smoke
and smell may emit for a couple of
» Brightness level chosen on the screen will be
shown as d-01 or d-02or d-03 .
3. After setting brightness, touch the key or
wait for 4 seconds.
» symbol flashes and screen brightness is set.
First cleaning of the appliance
detergents or cleaning materials.
Do not use aggressive detergents, cleaning
powders/creams or any sharp objects
during cleaning.
metal scrapers to clean the oven door glass
since they can scratch the surface, which
may result in shattering of the glass.
1. Remove all packaging materials.
2. Wipe the surfaces of the appliance with a
damp cloth or sponge and dry with a cloth.
Initial heating
Heat up the product for about 30 minutes and
then switch it off. Thus, any production residues
or layers will be burnt off and removed.
WARNING
Hot surfaces cause burns!
Product may be hot when it is in use. Never
touch the hot burners, inner sections of the
oven, heaters and etc. Keep children away.
Electric oven
1. Take all baking trays and the wire grill out of
the oven.
2. Close the oven door.
3. Select Static position.
4. Select the highest oven power; See How to
operate the electric oven, page 17.
5. Operate the oven for about 30 minutes.
6. Turn off your oven; See How to operate the
electric oven, page 17
Grill oven
1. Take all baking trays and the wire grill out of
the oven.
2. Close the oven door.
3. Select the highest grill power; see How to
operate the grill, page 21.
4. Operate the grill about 30 minutes.
5. Turn off your grill; see How to operate the
grill, page 21
hours during the initial operation. This is
quite normal. Ensure that the room is well
ventilated to remove the smoke and smell.
Avoid directly inhaling the smoke and the
smell that emits.
putting in or removing dishes into/from the
hot oven.
16/EN
Page 17
Always use heat resistant oven gloves when
Before you can use the oven, the time must
1 Fun
ction knob
2 Thermostat knob
5 How to operate the oven
General information on baking,
roasting and grilling
WARNING
Hot surfaces cause burns!
Product may be hot when it is in use. Never
touch the hot burners, inner sections of the
oven, heaters and etc. Keep children away.
putting in or removing dishes into/from the
hot oven.
DANGER:
Be careful when opening the oven door
as steam may escape.
Exiting steam can scald your hands, face
and/or eyes.
Tips for baking
• Use non-sticky coated appropriate metal
plates or aluminum vessels or heat-resistant
silicone moulds.
• Make best use of the space on the rack.
• Place the baking mould in the middle of the
shelf.
• Select the correct rack position before
turning the oven or grill on. Do not change
the rack position when the oven is hot.
• Keep the oven door closed.
Tips for roasting
• Treating whole chicken, turkey and large
piece of meat with dressings such as lemon
juice and black pepper before cooking will
increase the cooking performance.
• It takes about 15 to 30 minutes longer to
roast meat with bones when compared to
roasting the same size of meat without
bones.
• Each centimeter of meat thickness requires
approximately 4 to 5 minutes of cooking
time.
• Let meat rest in the oven for about
10 minutes after the cooking time is over.
The juice is better distributed all over the
roast and does not run out when the meat is
cut.
• Fish should be placed on the middle or
lower rack in a heat-resistant plate.
How to operate the electric oven
be set. If the time is not set, oven will not
operate.
Select temperature and operating mode
Your oven is equipped with pop-out knobs that
protrude when you press them.
1. Press inwards to protrude the knob and then
turn it to make the desired setting.
2. When the cooking process is finished, turn
the knob to off (upper) position and press it
inwards.
1. Set the Temperature knob to the desired
temperature.
2. Set the Function knob to the desired
operating mode.
» Oven heats up to the adjusted temperature and
maintains it. During heating, temperature lamp
stays on.
17/EN
Page 18
Top and bottom heating
Top and bottom heatingTop and bottom heating
Top and bottom heating
Top and bottom heating are in
Bottom heating
Bottom heatingBottom heating
Bottom heating
Only bottom heating is in operation. It
Fan supported bottom/top heating
Fan supported bottom/top heatingFan supported bottom/top heating
Fan supported bottom/top heating
Top heating, bottom heating plus fan
Full grill
Full grillFull grill
Full grill
Large grill at the ceiling of the oven is
Grill+Fan
Grill+FanGrill+Fan
Grill+Fan
Booster
BoosterBooster
Booster
This function is used to heat the oven
Switching off the electric oven
Turn the function knob and temperature knob to
off (upper) position.
Rack positions (For models with wire shelf)
Rack positions (For models with wire shelf)
Rack positions (For models with wire shelf)Rack positions (For models with wire shelf)
It is important to place the wire shelf onto the
side rack correctly. Wire shelf must be inserted
between the side racks as illustrated in the figure.
Do not let the wire shelf stand against the rear
wall of the oven. Slide your wire shelf to the front
section of the rack and settle it with the help of
the door in order to obtain a good grill
performance.
Operating modes
The order of operating modes shown here may
be different from the arrangement on your
product.
in operation. It is suitable for grilling
large amount of meat.
• Put big or medium-sized
portions in correct rack
position under the grill
heater for grilling.
• Set the temperature to
maximum level.
• Turn the food after half of
the grilling time.
Grilling effect is not as strong as in
Full Grill
• Put small or medium-sized
portions in correct shelf
position under the grill
heater for grilling.
• Set the desired temperature.
• Turn the food after half of
the grilling time.
operation. Food is heated
simultaneously from the top and
bottom. For example, it is suitable for
cakes, pastries, or cakes and
casseroles in baking moulds. Cook
with one tray only.
is suitable for pizza and for
subsequent browning of food from
the bottom.
(in the rear wall) are in operation. Hot
air is evenly distributed throughout
the oven rapidly by means of the fan.
Cook with one tray only.
18/EN
rapidly; it is not suitable for cooking
food.
• Select the desired
temperature after selecting
this function. Temperature
light turns on and oven is
heated.
• Light turns off after the
heating process is
completed. Now select the
desired function to cook your
food.
Page 19
1 Adjustment key
2 Keylock
3 Current time
4 Alarm volume
5 Screen brightness setting
6 Plus key
7 Minus key
8 Alarm symbol
9 End of cooking time
10 Cooking time
11 Program key
Maximum time that can be set for end of
While making any adjustments, related
If no cooking setting is made, time of the
Cooking time will be displayed once the
If you mute the alarm by pressing any
Using the oven clock
cooking is 5 hours 59 minutes.
Program will be cancelled in case of power
failure. You must reprogram the oven.
symbols will flash on the display. You must
wait for a short time for the settings to take
effect.
day cannot be set.
cooking starts.
Cooking by specifying the cooking time:
You can set the oven so that it will stop at the
end of the specified time by setting the cooking
time on the clock.
1. For cooking time, touch the key to
activate the symbol.
2. Set the desired brightness by touching ''''––––'''' /
'+'
'+' keys to set cooking time.
'+''+'
» Once the Cooking Time is set, Cooking symbol
will be displayed continuously.
3. Put your dish into the oven.
4. Select operation mode and temperature.
5. After cooking process is completed,
symbol will flash on the screen, "End"
message appears and alarm signal rings.
6. Alarm signal will sound for 2 minutes. To
stop the alarm signal, just press any key.
Alarm will be silenced and current time will
be displayed.
key, the oven will restart operating.
If you press any key at the end of the
alarm period, the oven will restart
operating.
7. Turn off the oven with the Temperature knob
and Function knob.
If you want to set the end of cooking time
to a later time:
After setting the cooking time on the clock, you
can set the end of cooking time to a later time.
1. For cooking time, touch the key to
activate the symbol.
2. Set the desired brightness by touching ''''––––'''' /
'+'
'+' keys to set cooking time.
'+''+'
» Once the Cooking Time is set, Cooking symbol
will be displayed continuously.
3. For end of cooking time key, touch the
key to activate the symbol.
4. Set the desired brightness by touching ''''––––'''' /
'+'
'+' keys to set end of cooking time.
'+''+'
» After end of cooking time is set,
symbol will appear on the screen
continuously. Once the cooking starts symbol
will disappear.
5. Put your dish into the oven.
6. Select operation mode and temperature.
symbol and
19/EN
Page 20
If you mute the alarm by pressing any
When the Keylock function is activated,
Maximum alarm time can be 23 hours
If the alarm time and cooking time are set
» Oven timer automatically calculates the startup
time for cooking by using the end of cooking time
and the cooking period you have set. Selected
operation mode is activated when the startup
time of cooking has come and the oven is heated
up to the set temperature. It maintains this
temperature until the end of cooking time.
7. After cooking is finished, symbol flashes
on the screen. "End" message appears
and alarm signal rings.
8. Alarm signal will sound for 2 minutes. To
stop the alarm signal, just press any key.
Alarm will be silenced and current time will
be displayed.
key, the oven will restart operating.
If you press any key at the end of the
alarm period, the oven will restart
operating.
9. Turn off the oven with the Temperature knob
and Function knob.
Using the keylock
Activating the keylock
You can prevent oven from being used by
activating the Keylock function.
1. For setting, touch the key to activate the
symbol.
» "OFF" message will appear on the screen
2. Activate the keylock by touching the '+'
'+' key.
'+''+'
» The "On" message will appear on the screen
and symbol stays on the screen.
control panel keys except for the key
cannot be used.
Using the clock as an alarm
You can use the clock of the product for any
warning or reminder apart from the cooking
programme.
The alarm clock has no influence on the
functions of the oven. It is only used as a warning.
For example, this is useful when you want to turn
food in the oven at a certain point of time. Alarm
clock will give a signal once the time you set is
over.
To set the alarm clock, touch the
key to activate the symbol.
1.
and 59 minutes.
2. Set the alarm time by pressing ''''––––'''' / '+'
'+' keys.
'+''+'
» After alarm is set, symbol will stay on the
screen and the alarm time will appear on the
screen.
3. After alarm time has elapsed, symbol
flashes and the alarm is heard.
Turning off the alarm
1. To stop the alarm, just press any key.
» Alarm will be silenced and current time will be
displayed.
If you want to cancel the alarm;
1. Push the key to reset the alarm time and
activate the symbol.
2. Press the ''''––––'''' key until "00:00"
"00:00" appears on
"00:00""00:00"
the screen.
» Alarm is canceled.
concurrently, shortest time will be displayed.
To deactivate the keylock, touch the
1. key to activate the symbol.
» The "On" message will appear on the screen.
2. Deactivate the keylock by pressing the ''''––––''''
key.
» After keylock has been deactivated, the
"OFF" message will appear on the screen and
the
symbol disappears.
20/EN
Changing alarm tone
1. activate the symbol by touching the
symbol.
2. Set your tone by pressing ''''––––'''' / '+'
'+' keys.
'+''+'
» Chosen alarm audio tone will appear on the
screen as "b-01" or "b-02"or "b-03" .
3. After the audio tone is set, touch the
key
or wait for 4 seconds.
» symbol disappears and the audio tone is
set.
Page 21
The timings in
this chart are meant as a
guide. Timings may vary due to temperature
1st rack of the oven is the
bottom
bottombottom
bottom
rack.
Dish
DishDish
Dish
Cooking l evel number
Cooking l evel numberCooking l evel number
Cooking l evel number
Rack position
Rack positionRack position
Rack position
Temperature (°C)
Temperature (°C)Temperature (° C)
Temperature (°C)
Cooking t ime
Cooking t ime Cooking time
Cooking t ime
**Cakes in tray
One level
3 175 25 ... 30
**Cakes in cooking
One level
3 175 25 ... 30
**Sponge cake
One level
3 200 5 ... 10
**Cookie
One level
3 175 25 ... 30
**Dough pastry
One level
3 180 30 ... 40
**Rich pastry
One level
3 180 25 ... 35
**Leaven
One level
3 190 35 ... 45
**Lasagna
One level
3 180 30 ... 40
**Pizza One level
3 200 ... 220
15 ... 20
Beef steak (whole) /
One level
3 25 min. 250/max,
100 ... 120
Leg of Lamb
One level
3 25 min. 220 then
70 ... 90
Roasted chicken
One level
1 15 min. 250/max,
55 ... 65
Turkey (5.5 kg)
One level
1 25 min. 250/max,
150 ... 210
Fish One level
3 200 20 ... 30
Cook the pastry in accordance with
the
Before you can use the oven, the time must
Cooking times table
of food, thickness, type and your own
preference of cooking.
paper
Baking and roasting
(approx. in m in.)
(approx. in m in.)
(approx. in m in.)(approx. in m in.)
Roast
(casserole)
(**) In a cooking that requires preheating, preheat
at the beginning of cooking until the thermostat
lamp turns off.
Tips for baking cake
• If the cake is too dry, increase the
temperature by 10°C and decrease the
cooking time.
• If the cake is wet, use less liquid or lower
the temperature by 10°C.
• If the cake is too dark on top, place it on a
lower rack, lower the temperature and
increase the cooking time.
• If cooked well on the inside but sticky on the
outside use less liquid, lower the
temperature and increase the cooking time.
Tips for baking pastry
• If the pastry is too dry, increase the
temperature by 10°C and decrease the
cooking time. Dampen the layers of dough
with a sauce composed of milk, oil, egg and
yoghurt.
• If the pastry takes too long to bake, pay
care that the thickness of the pastry you
have prepared does not exceed the depth of
the tray.
then 180 ... 190
180 ... 190
then 180 ... 190
then 190
• If the upper side of the pastry gets browned,
but the lower part is not cooked, make sure
that the amount of sauce you have used for
the pastry is not too much at the bottom of
the pastry. Try to scatter the sauce equally
between the dough layers and on the top of
pastry for an even browning.
mode and temperature given in the cooking
table. If the bottom part is still not browned
enough, place it on one lower rack next
time.
Tips for cooking vegetables
• If the vegetable dish runs out of juice and
gets too dry, cook it in a pan with a lid
instead of a tray. Closed vessels will
preserve the juice of the dish.
• If a vegetable dish does not get cooked, boil
the vegetables beforehand or prepare them
like canned food and put in the oven.
How to operate the grill
be set. If the time is not set, oven will not
operate.
21/EN
Page 22
Foods that are not suitable for grilling
Food
FoodFood
Food
Inser tion level
Inser tion levelInser tion level
Inser tion level
Grilling time (approx.)
Grilling time (approx.)Grilling t ime (approx.)
Grilling time (approx.)
Fish 2...3
Sliced chicken
2...3 25...35 min.
Lamb chops
2...3 20...25 min.
Roast beef
2...3
Veal chops
2...3
Toast bread
3
1...2 min.
#
WARNING
Close oven door during grilling.
Hot surfaces may cause burns!
Switching on the grill
1. Turn the Function knob to the desired grill
symbol.
2. Then, select the desired grilling temperature.
3. If required, perform a preheating of about 5
minutes.
» Temperature light turns on.
Switching off the grill
1. Turn the Function knob to Off (top) position.
Rack positions
Grill performance will decrease if the wire grill
stands against rear part of the oven. Slide your
wire grill to the front section of the rack and
settle it with the help of the door in order to
obtain the best grill performance.
Grilling with electric grill
carry the risk of fire. Only grill food
which is suitable for intensive grilling
heat.
Do not place the food too far in the
back of the grill. This is the hottest area
and fatty food may catch fire.
Cooking times table for grilling
20...25 min. #
dependi ng o n thickne ss
depe nding on thic kness
depe nding on thic knessdepe nding on thic kness
22/EN
25...30 min. #
25...30 min. #
Page 23
supply before starting maintenance and
The surface might get damaged by some
Do not use harsh abrasive cleaners or sharp
Do not use steam cleaners
to clean the
Do not remove the control buttons/knobs to
Don't use any harsh abrasive cleaners or
6 Maintenance and care
General information
Service life of the product will extend and the
possibility of problems will decrease if the
product is cleaned at regular intervals.
DANGER:
Disconnect the product from mains
cleaning works.
There is the risk of electric shock!
DANGER:
Allow the product to cool down before
you clean it.
Hot surfaces may cause burns!
• Clean the product thoroughly after each use.
In this way it will be possible to remove
cooking residues more easily, thus avoiding
these from burning the next time the
appliance is used.
• No special cleaning agents are required for
cleaning the product. Use warm water with
washing liquid, a soft cloth or sponge to
clean the product and wipe it with a dry
cloth.
• Always ensure any excess liquid is
thoroughly wiped off after cleaning and any
spillage is immediately wiped dry.
• Do not use cleaning agents that contain
acid or chloride to clean the stainless or
inox surfaces and the handle. Use a soft
cloth with a liquid detergent (not abrasive) to
wipe those parts clean, paying attention to
sweep in one direction.
detergents or cleaning materials.
Do not use aggressive detergents, cleaning
powders/creams or any sharp objects
during cleaning.
metal scrapers to clean the oven door glass
since they can scratch the surface, which
may result in shattering of the glass.
appliance as this may cause an electric
shock.
Cleaning the control panel
Clean the control panel and knobs with a damp
cloth and wipe them dry.
clean the control panel.
Control panel may get damaged!
Cleaning the oven
To clean the side wall
1. Remove the front section of the side rack by
pulling it in the opposite direction of the side
wall.
2. Remove the side rack completely by pulling
it towards you.
Clean oven door
To clean the oven door, use warm water with
washing liquid, a soft cloth or sponge to clean
the product and wipe it with a dry cloth.
sharp metal scrapers for cleaning the oven
door. They could scratch the surface and
destroy the glass.
Removing the oven door
1. Open the front door (1).
2. Open the clips at the hinge housing (2) on
the right and left hand sides of the front door
by pressing them down as illustrated in the
figure.
23/EN
Page 24
1 Front door
2 Hinge
3 Oven
Steps carried out during removing process
1 Frame
2 Plastic part
1 Innermost glass panel
2 Inner glass panel
3 Outer glass panel
4 Plastic glass panel slot
-
Lower
3. Move the front door to half-way.
4. Remove the front door by pulling it upwards
to release it from the right and left hinges.
should be performed in reverse order to
install the door. Do not forget to close the
clips at the hinge housing when reinstalling
the door.
Removing the door inner glass
The inner glass panel of the oven door can be
removed for cleaning.
Open the oven door.
Pull towards yourself and remove the plastic part
installed to upper section of the front door.
As illustrated in figure, raise the innermost glass
panel (1) slightly in direction AAAA and pull it out in
direction BBBB.
Repeat the same procedure to remove the inner
glass panel (2).
24/EN
Page 25
rder to
The oven lamp is a special electric light bulb
Position of lamp might vary from the figure.
The first step to regroup the door is reinstalling
inner glass panel (2).
As illustrated in figure, place the chamfered
corner of the glass panel so that it will rest in the
chamfered corner of the plastic slot.
Replacing the oven lamp
DANGER:
Before replacing the oven lamp, make
sure that the product is disconnected
from mains and cooled down in o
avoid the risk of an electrical shock.
Hot surfaces may cause burns!
that can resist up to 300 °C. See Technical
specifications, page 9 for details. Oven
lamps can be obtained from Authorised
Service Agents.
If your oven is equipped with a round lamp:
1. Disconnect the product from mains.
2. Turn the glass cover counter clockwise to
remove it.
Inner glass panel (2) must be installed into the
plastic slot close the innermost glass panel (1).
When installing the innermost glass panel (1),
make sure that the printed side of the panel
faces towards the inner glass panel.
It is important to seat lower corner of inner glass
panel into the lower plastic slot.
Push the plastic part towards the frame until you
hear a "click".
3. Remove the oven lamp by turning it counter
clockwise and replace it with the new one.
4. Install the glass cover.
25/EN
Page 26
• It is normal that steam escapes during operation. >>>
This is not a fault.
• When the metal parts are heated, they may expand and cause noise. >>>
This is not a fault.
• The mains fuse is defective or has tripped. >>>
Check fuses in the fuse box. If necessary,
• Oven lamp is defective. >>>
Replace oven lamp.
• Function and/or Temperature are not set. >>>
Set the function and the temperature with the
• A previous power outage has occurred. >>>
Adjust the time / Switch of the product and switch
Consult the Authorised Service Agent or the
instructions in this section. Never attempt to
7 Troubleshooting
Oven emits steam when it is in use.
Product emits metal noises while heating and cooling.
Product does not operate.
replace or reset them.
• Product is not plugged into the (grounded) socket. >>> Check the plug connection.
• Buttons/knobs/keys on the control panel do not function. >>> Keylock may be enabled. Please
disable it. (See. Using the keylock, page 20 )
Oven light does not work.
• Power is cut. >>> Check if there is power. Check the fuses in the fuse box. If necessary,
replace or reset the fuses.
Oven does not heat.
Function and/or Temperature knob/key.
• In models equipped with a timer, the timer is not adjusted. >>> Adjust the time.
(In products with microwave oven, timer controls only microwave oven.)
• Power is cut. >>> Check if there is power. Check the fuses in the fuse box. If necessary,
replace or reset the fuses.
(In models with timer) Clock display is blinking or clock symbol is on.
it on again.
dealer where you have purchased the
product if you can not remedy the trouble
although you have implemented the
repair a defective product yourself.
26/EN
Page 27
Filename: 285450068.doc
Directory: \\ar.arcelik\arcdfs\bol\bol-users\AR720007
Template: D:\Documents and Settings\ar720007\Application
Data\Microsoft\Templates\Normal.dotm
Title:
Subject:
Author: Arcelik BT
Keywords:
Comments:
Creation Date: 16.05.2013 10:31:00
Change Number: 3
Last Saved On: 16.05.2013 10:31:00
Last Saved By: Arcelik BT
Total Editing Time: 0 Minutes
Last Printed On: 16.05.2013 10:35:00
As of Last Complete Printing
Number of Pages: 28 (approx.)
Number of Words: 7.658 (approx.)
Number of Characters: 43.657 (approx.)
Loading...