Arthur martin ASI64030X User Manual

user manual

Dishwasher

ASI 64030

2 electrolux

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

Contents

Safety information 3
Product description 4
Control panel 5
Use of the appliance 6
Setting the water softener 7
Use of dishwasher salt 8
Use of rinse aid 8
Loading cutlery and dishes 9
Use of detergent 11
Multitab function 12

Subject to change without notice

Setting and starting a washing programme

Washing programmes 15
Care and cleaning 16
What to do if… 17
Technical data 18
Installation 18
Water connection 19
Electrical connection 20
Environment concerns 20

13

During manufacture, this appliance has been
built in accordance with the standards, di­rectives and/or regulations applying to its use
on French territory.

For the safety of person and property, as
well as for the respect of the environ­ment, you should first read carefully the
following recommendations before
making any use of your appliance.

Warning! To avoid any risk of damage

to the appliance, transport it in its
operating position and with its packing
blocks in place (depending on the
model). While unpacking the appliance,
and to avoid the risk of suffocation or
physical injury, keep the packaging
materials out of the reach of children.

Warning! To avoid any risk to fixtures
and fittings, risk of structural damage or
of physical injury etc., any installation
work, connections (to water, gas,
electricity and air extraction depending
on the model), setting up and
maintenance of your appliance must be
carried out by a qualified service
technician.

Warning! Your appliance has been
designed for use by adults. It is intended
for normal domestic use. Do not use it
for commercial or industrial purposes or
for any purpose other than that for which

it was designed. This way, you will avoid
risks of harming persons or damaging
property.

Warning! Before carrying out any
manual cleaning operation, disconnect
the power supply. Use only products
that are non-corrosive or non­flammable. To avoid a risk of
electrocution, never spray water or
steam onto the appliance.

Warning! If your appliance is fitted with
lighting, disconnect the appliance from
the mains supply before changing the
light fitting bulb (or neon tube, etc.) to
avoid electrocution.

Warning! To avoid risks of explosion or
fire, do not put inflammable products or
items wetted with inflammable products
inside, near or on the appliance.

Warning! When disposing of your
appliance, to eliminate any risk of
physical harm or damage, disable
anything which might cause a hazard:
cut off the mains cable close to the
appliance. Find out about your local
authority's authorised facilities for
disposing of your appliance.

Please now read these instructions
carefully to ensure the best use of your
appliance.

Safety information

For your safety and correct operation of
the appliance, read this manual carefully
before installation and use. Always keep
these instructions with the appliance
even if you move or sell it. Users must
fully know the operation and safety fea­tures of the appliance.

Correct use

• The appliance is designed exclusively for
domestic use.

• Only use the appliance to clean household
utensils that are applicable for dishwash­ers.

• Do not put solvents in the appliance. Risk
of explosion.

• Put the knives and all items with sharp
points in the cutlery basket with their
points down. If not, put in a horizontal po­sition in the upper basket.

• Use only branded products for dishwash­ers (detergent, salt, rinse aid).

• If you open the door while the appliance is
in operation, hot steam can escape. Risk
of skin burns.

•Do not remove dishes from the dishwasher
before the end of the washing programme.

• When the washing programme is comple­ted, disconnect the mains plug from the
mains socket and close the water tap.

• Only an authorised service engineer can
repair this appliance. Use only original
spare parts.

• Do not do repairs yourself to prevent injury
and damage to the appliance. Always con­tact your local Service Force Centre.

General safety

• Persons (including children) with reduced
physical sensory, mental capabilities or
lack of experience and knowledge must
not use the appliance. They must have su­pervision or instruction for the operation of
the appliance by a person responsible for
their safety.

• Obey the safety instructions from the man­ufacturer of the dishwasher detergent to
prevent burns to eyes, mouth and throat.

• Do not drink the water from the dishwash­er. Detergent residues can stay in your ap­pliance.

electrolux 3

• Always close the door when you do not
use the appliance to prevent injury and not
to stumble over the open door.

• Do not sit or stand on the open door.

Child safety

• Only adults can use this appliance. Chil­dren must get supervision to make sure
that they do not play with the appliance.

• Keep all the packaging away from children.
There is a risk of suffocation.

• Keep all detergents in a safe area. Do not
let children touch the detergents.

• Keep children away from the appliance
when the door is open.

Warning!
The dishwasher detergent is
dangerous!

The detergent is very corrosive; if there
is any accident with it, you must contact
immediately your regional poisons
centre and a doctor. If any dishwasher
detergent is swallowed, you must
contact immediately your regional
poisons centre and a doctor. If any of the
detergent gets into the eyes, bathe
immediately with plenty of water while
waiting for a doctor. Keep this product
in a safe place, out of the reach of
children. Never leave the door open
when there is detergent in the appliance.
We recommend that you fill the deter­gent compartment just before starting a
washing programme.

Installation

• Make sure that the appliance is not dam­aged because of transport. Do not con­nect a damaged appliance. If necessary,
contact the supplier.

• Remove all packaging before first use.

• A qualified and competent person must do
the electrical installation.

• A qualified and competent person must do
the plumbing installation.

• Do not change the specifications or modify
this product. Risk of injury and damage to
the appliance.

4 electrolux

• Do not use the appliance:
– if the mains cable or water hoses are

damaged,

– if the control panel, worktop or plinth

area are damaged, that you can get ac­cess to the inner side of the appliance.

Contact your local Service Force Centre.

Product description

• Do not drill into the sides of the appliance
to prevent damage to hydraulic and elec­trical components.

Warning! Carefully obey the
instructions for electrical and water
connections.

1 Upper basket
2 Water hardness dial
3 Salt container
4 Detergent dispenser
5 Rinse aid dispenser

6 Rating plate
7 Filters
8 Lower spray arm
9 Upper spray arm

Control panel

electrolux 5

6

1 On/off button
2 Programme selection buttons
3

Delay start button

4 Digital display
5 Indicator lights
6 Function buttons

Indicator lights

Programme-in-progress – Comes on when you select a washing programme.

End-of-programme Comes on when the washing programme is completed.

Multitab Comes on when you activate the multitab function. Refer to 'Multitab func-

– Stays on for all the duration of the washing programme.
– Goes off at the end of the washing programme.

tion'.

6 electrolux

Indicator lights

1)

Salt

Rinse aid

1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while

1)

a washing programme operates.

Programme selection buttons

With these buttons you can select the wash­ing programme. Press a programme button,
the related indicator light comes on. Refer to
'Washing programmes' chapter for more da­ta about the washing programmes.

Delay start button

Use the delay start button to delay the start
of the washing programme with an interval
between 1 and 19 hours. Refer to the chapter
'Setting and starting a washing programme'.

Digital display
The display shows:

• the set level of the water softener.

• Remaining time to the end of the pro­gramme.

• Activation/deactivation of the rinse aid dis­penser (only with multitab function on).

• End of the washing programme. The dis­play shows a zero.

• Number of hours in delay start.

• Fault codes.

Function buttons

Use the function buttons for these opera­tions:

• To set the water softener. Refer to the
chapter 'Setting the water softener'.

• To cancel the washing programme in pro-

Comes on when it is necessary to fill the salt container. Refer to 'Use of
dishwasher salt'.
After you fill the container, the salt indicator light can continue to stay on
for some hours. This does not have an unwanted effect on the operation
of the appliance.

Comes on when it is necessary to fill the rinse aid. Refer to 'Use of rinse
aid'.

the chapter 'Setting and starting a washing
programme'.

• To activate/deactivate the multitab func­tion. Refer to the chapter 'Multitab func­tion'.

• To deactivate/activate the rinse aid dis­penser, when multitab function is active.
Refer to the chapter 'Multitab function'.

Setting mode

The appliance must be in setting mode for
these operations:

• To set a washing programme.

• To set the water softener level.

• To deactivate/activate the rinse aid dis­penser.

Press the on/off button. The appliance is in
setting mode when:
– All the programme indicator lights come

on.

Press the on/off button. The appliance is not
in setting mode when:
– Only one programme indicator light comes

on

– A washing programme is set. It is neces-

sary to cancel the programme to go back
to the setting mode. Refer to the chapter
'Setting and starting a washing pro­gramme'.

gress or a delay start in progress. Refer to

Use of the appliance

Refer to the following instructions for each
step of procedure:

1. Make a check if the water softener level
is correct for the water hardness in your
area. If necessary set the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the dish­washer.

5. Set the correct washing programme for
the type of load and soil.

6. Fill the detergent dispenser with the cor­rect quantity of detergent.

7. Start the washing programme.

If you use combi detergent tablets ('3 in
1', '4 in 1', '5 in 1', etc.), refer to the
chapter 'Multitab function'.

Setting the water softener

The water softener removes minerals and
salts from the water supply. Minerals and
salts can have bad effect on the operation of
the appliance.
Water hardness is measured in equivalent
scales:

• German degrees (dH°).

Water hardness Water hardness setting

°dH °TH mmol/l Clarke manually electronically

51 - 70 91 - 125 9,1 - 12,5 64 - 88 2 10

43 - 50 76 - 90 7,6 - 9,0 53 - 63 2 9

37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 8

29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 7

23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 6

19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 5

15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4

11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3

4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2

< 4 < 7 < 0,7 < 5

1) No use of salt required.

You must set the water softener man­ually and electronically.

Manual adjustment

The appliance is set at the factory at po­sition 2.

1. Open the door.

2. Remove the lower basket.

3. Turn the water hardness dial to position
1 or 2 (refer to the chart).

4. Install the lower basket.

• French degrees (°TH).

• mmol/l (millimol per litre - international unit
for the hardness of water).

•Clarke.

Adjust the water softener to the water hard­ness in your area. If necessary, contact your
local water authority.

1)

1

5. Close the door.

Electronic adjustment

The water softener is set at the fac­tory at level 5.

1. Switch on the appliance.

2. Make sure that the appliance is in setting

mode.

3. Press and hold function buttons B and C

until the indicator lights of function but­tons A, B and C start to flash.

4. Release function buttons B and C.

5. Press function button A.

– The indicator lights for function buttons

B and C go off.

– The indicator light for function button A

continues to flash.

– The digital display shows the current

level.
Example: digital display shows
el 5.

electrolux 7

1)

1

= lev-

8 electrolux

6. Press the function button A one time to
increase the water softener level by one
step.

Use of dishwasher salt

Caution! Only use dishwashers salt.
Types of salt that are not applicable for
dishwashers cause damage to the water
softener.

Caution! Grains of salt and salty water
on the bottom of the appliance can
cause corrosion. Fill the appliance with
salt before you start a washing
programme to prevent corrosion.

Do these steps to fill the salt container:

1. Turn the cap anticlockwise to open the
salt container.

2. Fill the salt container with 1 litre of water
(only the first operation).

3. Use the funnel to fill the salt container with
salt.

7. Press the on/off button to save the oper­ation.

4. Remove the salt around the opening of
the salt container.

5. Turn the cap clockwise to close the salt
container.

It is normal that water overflows from the
salt container when you fill it with salt.

When you set electronically the water soft­ener to level 1, the salt indicator light does
not stay on.

Use of rinse aid

Caution! Only use branded rinse aid for
dishwashers.
Do not fill the rinse aid dispenser with
other products (e.g. dishwasher clean­ing agent, liquid detergent). This can
cause damage to the appliance.

Rinse aid makes it possible to dry the
dishes without streaks and stains.
Rinse aid is automatically added during
the last rinsing phase.

Do these steps to fill the rinse aid dispenser:

1. Press the release button (A) to open the
rinse aid dispenser.