Page 1
Introducing the:
Artemis Labs LA-1
A New Purist Tube Line Amplifier
The Artemis Labs LA-1 Line Amplier combines the clean, accurate sound of a purist single-triode line
amplier with the convenience and reliability of a solid, well-built product. Special care is taken with
all parts in the audio path, from the Goldpoint™ stepped attenuator to the Swedish output chokes by
Lundahl. The sonic clarity and detail are outstanding.
Key Features:
5 inputs, 2 outputs
Five stereo inputs available at the ick of a switch. Two pairs of RCA output jacks allow connections to sub-woofer
or signal processor, as well as power amplier.
8dB maximum gain
Provides adequate gain for most sources without the hum and noise caused by excessive gain.
Goldpoint™ stepped attenuator volume control
Series-type stepped attenuator using precision metal-lm resistors by Dale and switch mechanism by Elma (Swiss).
Dual conductive-plastic balance controls
A separate potentiometer is used to balance each channel. This allows maximum gain in the normal balanced
condition and permits the use of high-quality conductive plastic pots with no sonic degradation yet innite resolution.
Mono/Stereo switch with LED indicator
The left and right channels can be merged, with a yellow LED indicating the mono condition.
One 5687 tube per channel in Cool-Swap™ Conguration
An idle spare in each tube, plus tubes run cooler.
Lundahl choke loads for each triode
Allows tubes to run in their most linear mode and permits lower plate supply voltage
Low-Gain MOSFET high voltage regulation
One regulator per channel minimizes cross-talk and gives a rm, stable sound without sounding “solid-state”.
Designed and built in the United States using the best parts from around the world.
Artemis Labs products
are distributed by:
AYDN Vacuum Tube Audio
679 Easy Street, Unit E
Simi Valley, California 93065 USA
www.aydn.com
Tel: +1 818 216-7882
email: info@aydn.com
Loading...