![](/html/e9/e9f7/e9f798c322571968383ff2ded9bff2276b2860a5bace55cc8bafb004798d197a/bg1.png)
Instruction Manual
8 Port High Speed HDMI® Video Splitter with Audio - Rack Mountable
ST128HDMI2
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x HDMI® video splitter
• 2 x Rack Mounting Bracket
• 1 x Universal Power Adapter
• 1 x Package of screws
• 1 x Installation Guide
*actual product may vary from photos
System Requirements
• HDMI® enabled display device (i.e. monitor, projector, HDTV, etc)
• HDMI® enabled video source (i.e. computer, Blu-Ray player, PVR/
DVR, etc)
• Available AC electrical outlet
Installation
1. Make sure all displays and the video source device are turned o before installing.
2. Connect an HDMI® cable (not included) from each of the video display devices (e.g. monitor, HDTV, etc) to the numbered
output HDMI® connectors on the video splitter.
NOTE: Port 1 is the primary output so EDID information will be taken from there. The capabilities of the display on Port 1 will be
applied to all other ports so be careful not to exceed the capabilities of the other displays.
3. If connecting audio separately from HDMI®, connect speakers to the corresponding 3.5mm audio outputs.
4. Connect an HDMI® cable (not included) from the video source device (e.g. computer, PVR/DVR, etc) to the ‘SOURCE’ input
HDMI® connector on the video splitter.
5. If connecting audio separately from HDMI®, connect the audio source to the input 3.5mm audio connector.
6. Connect the included power adapter to the video splitter.
7. Turn on the display devices, followed by the video source. The video output should be displayed on all connected
display devices.
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 04/11/2013
![](/html/e9/e9f7/e9f798c322571968383ff2ded9bff2276b2860a5bace55cc8bafb004798d197a/bg2.png)
Specications
Number of Ports 8
Video Signal High Speed HDMI® (HDMI® 1.3)
1 x HDMI® female (input)
8 x HDMI® female (output)
1 x 3.5mm mini-jack Audio
Connectors
8 x 3.5mm mini-jack Audio
LEDs
Maximum Video Resolution 1920 x 1200 / 1080p
Maximum Cable Distance 5m
Audio Support Yes
HDCP Support Yes
DDC Support Yes
Rack Mountable Yes
Power Adapter
9 ~ 12VDC, 1500mA, center
Enclosure Material Metal
Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)
Storage Temperature -10°C ~ 60°C (14°F ~ 140°F)
Humidity 0% ~ 80%
Dimensions 43.0mm x 185.0mm x 44.0mm
Weight 3500g
(input)
(output)
1 x DC Power
1 x Power/Input
8 x Output
positive
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a three year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.