arTech SFPGLCLHSMST User Manual

Gigabit Fiber SFP Transceiver Module - Cisco GLC­LH-SM Compatible - SM/MM LC - 10 km (Mini-GBIC)

Product ID: SFPGLCLHSMST

The SFPGLCLHSMST Cisco Compatible Gigabit Fiber SFP Transceiver Module SM/MM LC is built to comply

with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade

an SFP slot on your Gigabit fiber networking equipment or fiber media converter.

Supporting a 1000Base-LX/LH network with data rates up to 1.25 Gbps, this LC SFP/Mini-GBIC module

can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. The SFP

transceiver supports both single-mode and multi-mode LC ports, with a single-mode distance of 10 km

(6.2 mi.) and multi-mode distance of 550 m (1804 ft.). Delivering both convenience and scalability, this

fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting

network traffic or requiring a device reboot.

This 1310nm single-mode/multi-mode SFP module is compatible with the Cisco GLC-LH-SM transceiver.

Also a perfect accessory for the StarTech.com Gigabit POE Open SFP Media Converter (ET1110PSE)

product.

Backed by a StarTech.com lifetime warranty and free lifetime technical support.

www.startech.com/m

1 800 265 1844

Certifications, Reports
and Compatibility

Applications

• Replacing defective or damaged SFPs in MSA compliant or Cisco
equipment

• Expand your network to remote segments

Features

• Delivers reliable Gigabit Ethernet connections for 1000Base-LX/LH
compliant networks

• 100% Cisco compatible SFP, equivalent to Cisco GLC-LH-SM

• Supports single-mode (10km / 6.2 mi.) and multi-mode (550 m /
1804 ft.)

• Data rates up to 1.25 Gbps

• Complies with SFP Multi-Source Agreements standards (MSA)

• Compatible with Cisco equipment

• LC Fiber connector

• Fully Hot Pluggable

www.startech.com/m

1 800 265 1844