arTech SATDOCK2REU3 User Manual

USB 3.0 SATA Hard Drive Duplicator & Eraser Dock
- Standalone 2.5/3.5in HDD & SSD Eraser and Cloner
Product ID: SATDOCK2REU3
The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in
SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed.
The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for
external drive management.
for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any
application requiring hard drive duplication or erasing.
With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking
station is compatible with virtually any SATA hard drive, and greatly increases the
storage/backup capabilities of your computer.
www.startech.com
1 800 265 1844
Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive
Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive
dock.
The SATDOCK2REU3 is backed by a 2-year StarTech.com warranty and free lifetime technical support.
www.startech.com
1 800 265 1844
+ 3 hidden pages