1U 17.3” HD 1080p Dual Rail Rackmount
Widescreen LCD Console
RACKCOND1701
RKCOND1701xx
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 01/21/2015
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
Table of Contents
Introduction ............................................................................................1
Packaging Contents ................................................................................................................................. 1
Installation ..............................................................................................1
Hardware Installation/Assembly ......................................................................................................... 1
Connecting to a USB Controlled Computer ....................................................................................4
Connecting to a PS/2 Controlled Computer ...................................................................................4
Connecting to a KVM Switch ................................................................................................................ 4
Operation ................................................................................................5
Front Panel Controls .................................................................................................................................5
Alternative Input Devices ....................................................................................................................... 6
Keyboard Replacement .........................................................................7
Touchpad Replacement ........................................................................8
Specications ..........................................................................................9
Technical Support .................................................................................. 10
Warranty Information ............................................................................10
Instruction Manual
i
Introduction
Packaging Contents
• 1U LCD Rack Console
• KVM Module
• 2 x KVM Module Extension Bracket
• 2 x Rear Bracket
• Universal Power Adapter
• Instruction Manual
Installation
Hardware Installation/Assembly
1. Note the safety stopper on the console drawer. The safety stopper is designed to
prevent the drawer from sliding out during transportation. Do not remove until the
console has been properly installed.
2. Slide the assembled console into the rack cabinet from the front and fasten the
console onto the front brackets using the proper cabinet screws for the rack/cabinet.
Instruction Manual
1
3. The rear brackets, and slide rails have a tight t. Carefully slide the rear brackets into
the front rails, then fasten the brackets to the cabinet/rack posts.
4. Attach the extensions brackets to both sides of the KVM switch module. Please
note the length of the extensions and mount them as shown.
NOTE: The orientation of the wide side of the extension
5. Push the KVM switch module evenly toward the drawer:
6. Slide the console drawer out and fasten the KVM module together using the
screw provided:
Instruction Manual
2
Loading...