PCI Express to PCI Adapter Card
Product ID: PEX1PCI1
This PCIe to PCI Adapter Card lets you use low profile PCI expansion cards in a server or desktop
motherboard PCI Express slot. Compliant with PCI Express Specification 1.0a and PCI Specification 2.2,
the adapter card connects through a PCIe 1x slot to provide a low profile PCI slot in its place. A spare full
size bracket for PCI Express card is also included for use in larger desktop or server PCI Express slots.
A versatile solution, the adapter card converts PCIe to PCI or PCI-X; a built-on LP4 power connector links
the card to the computer power supply, allowing you to install universal voltage PCI cards (3.3V/5V).
The adapter card offers an economical solution that lets you extend the usability of older or extra PCI Bus
cards in newer PCIe capable systems.
To ensure suitable installation in any low profile server or desktop computer, the PCIe/PCI adapter
features an innovative bracket design that adapts and secures the low profile PCI or PCI-X card into the
converted slot.
www.startech.com
1 800 265 1844
Certifications, Reports
and Compatibility
Applications
• Use older PCI-based cards on new PCI Express-enabled computer
systems
• Install a low profile/half-height PCI card into a full profile PCI Express
system
• Industrial and legacy PCI cards may be hard to find or too costly to
replace
Features
• Innovative bracket design adapts and secures the existing halfheight/low profile bracket of the PCI Card
• PCI Express base spec 1.0a compliant for up to 250MBps of available
bandwidth
• LP4 Power Connector Included for Universal Voltage PCI Cards
(3.3V/5V)
• Compliant with PCI Express to PCI/PCI-X Bridge spec 1.0
• No driver or software installation
www.startech.com
1 800 265 1844
Warranty 2 Years
Hardware Bus Type PCI Express
Card Type Standard Profile
Chipset ID Pericom - PI7C9X111SL
Interface PCI / PCI-X (5 / 3.3V)
Connector(s) Connector Type(s) 1 - PCI Express x1 Male
Internal Ports 1 - LP4 (4 pin, Molex Large Drive Power) Male
1 - PCI (5V, 32-bit) Slot Female
Software OS Compatibility OS Independent; No additional drivers or software required
Special Notes /
Requirements
System and Cable Requirements The PEX1PCI1 is not compatible with 32-bit 3.3V PCI cards.
It is compatible with 5V or universal 3.3V/5V PCI cards only.
Environmental Operating Temperature 0°C to 85°C (32°F to 185°F)
Physical
Characteristics
Product Height 0.8 in [20 mm]
Product Length 5.3 in [135 mm]
Product Weight 1.8 oz [52 g]
Product Width 2.8 in [70 mm]
Packaging
Information
Shipping (Package) Weight 4.9 oz [140 g]
What's in the Box Included in Package 1 - PCI Express to PCI Card
1 - Spare Full Profile Bracket
1 - Instruction Manual
Product appearance and specifications are subject to change without notice.
www.startech.com
1 800 265 1844
Loading...