arTech PEX10000SFP User Manual

PCI Express 10 Gigabit Ethernet Fiber Network Card w/ Open SFP+ - PCIe x4 10Gb NIC SFP+ Adapter
Product ID: PEX10000SFP
The PEX10000SFP 10 Gigabit Fiber Network Card is a cost-effective solution that delivers fast and reliable
10 Gbps network access at longer distances than copper-based networks. Using the SFP+ transceiver of
your choice, you can connect your PCI Express-based server or workstation directly to your 10G fiber
optic network.
With the rising strain on network resources due to large file transfers, multimedia content, and an
increase in network users, more bandwidth is often required at various levels of your networking
infrastructure. With up to 10 Gbps bandwidth, this fiber NIC lets you transfer more data at faster speeds,
and is an ideal low-cost addition to your server or high-powered workstation.
www.startech.com
1 800 265 1844
Greater Flexibility & Distance
The PEX10000SFP adapts to your network fiber connection and distance requirements to offer flexible
configuration via an open SFP+ slot, and is compatible with most 10GbE SFP+ transceivers. With broad
SFP+ compatibility this cost-effective fiber card lets you use your preferred SFP+ module, giving you
more options to connect your computer directly to a fiber network at greater distances.
Superior Power Efficiency
For improved operating efficiency, the PEX10000SFP features an energy-efficient Tehuti TN4010 chipset
that offers significantly reduced power consumption versus most comparable cards, including the Intel®
82599 chipset cards. Superior power efficiency also helps minimize heat generated by the card, in turn
avoiding an increase in the operating temperature within your server case.
Power Consumption Benchmark
Chipset Power Consumption Speed
Approximately 40% less power consumption compared to the Intel 82599 chipset
Tehuti TN4010 - PEX10000SFP <2.0W @ 10 Gbps
Intel 82599 3.4W @ 10 Gbps
This versatile 10 Gbps network card offers 16K Jumbo Frame and 802.1q VLAN tagging support, as well as
compatibility with VMWare® ESXi, Microsoft Hyper-V® virtualization software, and iSCSI support to
combine LAN and SAN functions.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
www.startech.com
1 800 265 1844
Certifications, Reports and Compatibility
Applications
Transmit full 10-Gigabit network speeds to a remote terminal over longer distances than copper cabling
Add 10Gbps network connectivity to file or application servers and high-performance workstations
Ideal for secure setups - a direct fiber connection means no electronic interference, which can be a problem with RJ45 network cards
Upgrade your onboard network adapter or existing SFP to 10 Gigabit SFP+, for faster communication
Create a video / audio editing console with 10 Gbps access to network storage
Perfect for remote embedded industrial monitoring systems, and high-speed video surveillance
Features
Faster networking with up to 10Gbps over fiber optic cabling
Broad SFP+ compatibility and compliant with most 10 Gigabit SFP+ modules (10GBASE-LR/SR/LRM)
Lower power consumption (4.12W max) than most comparable cards, with an energy-efficient chipset
Virtualization (VMWare® ESXi and Microsoft Hyper-V®) and iSCSI support
Compliant with IEEE 802.3ae (10GBASE-LR/SR only) and IEEE
802.3aq (10GBASE-LRM)
Up to 16K Jumbo Frame support
Supports 802.3ad (Link Aggregation) and 802.1Q (VLAN Tagging)
Compliant with PCI Express Rev 2.0 specification, using PCIe x4 (or higher) slot
Supports Checksum Offload (IP, TCP, UDP) and Large Send Offload
Supports PCI Message Signaled Interrupt (MSI)
Configured with standard-profile bracket, low-profile/half-height bracket included, ideal for installation in 1U server and rackmount applications
www.startech.com
1 800 265 1844
Warranty 2 Years
Hardware Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Chipset ID Tehuti - TN4010
AMCC - QT2025
Industry Standards IEEE 802.3ae (10GBASE-LR/SR only), IEEE 802.3aq
(10GBASE-LRM) PCI Express Rev 2.0
Interface Fiber (10 Gigabit Ethernet)
Ports 1
Performance Compatible Networks 10 Gbps
Full Duplex Support Yes
Jumbo Frame Support 16K max.
Maximum Data Transfer Rate 20000 Mbps (20 Gbps) - Full-Duplex
Supported Protocols IEEE 802.3ad (Link Aggregation)
IEEE 802.1Q (VLAN Tagging) IEEE 802.1P (Layer 2 Priority Encoding) IEEE 802.3x (2005 Flow Control Support) RFC 2819 (RMON MIB Statistics)
Connector(s) Connector Type(s) 1 - PCI Express x4 Male
External Ports 1 - SFP+ Slot Female
Software OS Compatibility Windows® 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2012 R2, 2016 Mac OS X® 10.10.3 to 10.12 Linux® 2.6.24 to 4.4.x LTS Versions only VMWare® ESXi 5.0/5.1/6.0 Microsoft Hyper-V®
Special Notes / Requirements
Note Fiber data transfer speeds and distances are dependent on
the SFP used (sold separately)
System and Cable Requirements Available PCI Express x4 slot
Not compatible with 10/100/1000 Mbps SFP transceivers, 10 Gigabit SFP+ transceiver required
Indicators LED Indicators 1 - Link/Activity (Green)
Power Power Consumption (In Watts) 4.12W Max
Environmental Humidity 20~80% RH (Non-Condensing)
Operating Temperature 0°C to 70°C (32°F to 158°F)
Storage Temperature -20°C to 85°C (-4°F to 185°F)
www.startech.com
1 800 265 1844
Physical Characteristics
Product Height 4.7 in [120 mm]
Product Length 3.3 in [84 mm]
Product Weight 1.8 oz [50 g]
Product Width 0.7 in [18 mm]
Packaging Information
Shipping (Package) Weight 5.2 oz [147 g]
What's in the Box Included in Package 1 - 1 Port PCI Express 10GBase-LR/SR/LRM Fiber Network
Card
1 - Low-Profile Bracket
1 - Driver CD
1 - Instruction Manual
Product appearance and specifications are subject to change without notice.
www.startech.com
1 800 265 1844
Loading...