1 Port eSATA + 1 Port SATA PCI Controller Card
with Low Prole Bracket
PCIESATA2I
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 01/30/2012
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to
which this manual applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges
that all trademarks, registered trademarks, service marks, and other protected names and/or
symbols contained in this manual and related documents are the property of their respective
holders.
Technical Support ...........................................................................................................................................4
Warranty Information ....................................................................................................................................4
1. Make sure that your system is unplugged and you are grounded.
2. Remove the cover of your system (see your computer’s user manual for details, if necessary)
and gently turn your computer onto its side.
3. Locate an empty PCI slot (usually white in color) and remove the metal plate that covers the
rear bracket. You may need a Phillips screwdriver to perform this step. Retain the screw!
You will need it to secure the card later.
4. Gently insert the card into the empty slot, making sure it is rmly seated.
5. Secure the card in place using the screw you removed in Step 3.
6. Install the devices you wish to use with the card into the case following the instructions
provided in their documentation.
7. Use the provided SATA cable to attach the internal devices you are using to the controller. Be
sure to also attach necessary power cords to all attached devices. For devices connected
to the external SATA port, a separate eSATA cable must be used.
8. Put the computer case back on.
Instruction Manual
1
Driver Installation
Windows® 2000
1. After the hardware installation, start Windows.
2. When Windows detects the PCIESATA2I, an “Add New Hardware Wizard” window will appear
on the screen. Select the “Specify the location of the driver (Advanced)” option then click
“Next” to continue the setup.
3. Select the option “Specify the location “ and type in “D:\WIN2000”, then click on “Next”
4. Click “Next” and then “Finish”, respectively.
5. Remove the CD, then select “Yes” to restart the computer and have the drivers take eect.
Windows® XP
1. After the hardware installation, start Windows.
2. When Windows detects the PCIESATA2I, an “Add New Hardware Wizard” window will appear
on the screen. Select the “Specify the location of the driver (Advanced)” option then click
“Next” to continue the setup.
3. Insert the included driver CD into the CD drive then type D:\WINXP into the eld designating
the le’s location. Press “Next” to continue the setup.
4. The driver installation has nished. Press “Finish” to continue.
5. Restart the computer for the driver to take eect.
Windows® Vista
1. After the hardware installation, start Windows.
2. Insert the driver CD into the CD-ROM drive.
3. Click on “Locate and install driver software (recommended)” from the pop-up window.
4. Navigate to your CD-ROM drive and locate the VISTA drivers in that directory.
5. Restart the computer for the setup to take eect.
Instruction Manual
2
Specications
Interface
ChipsetVIA VT6421
Connectors
Maximum Data Transfer Rate1.5 Gbps
Operating System Support
32-bit PCI v2.2 - 33 MHz/ 66 MHz
SATA revision 1.0
1 x 7-pin SATA (Internal)
1 x 7-pin eSATA (External)
Windows 98SE/ ME/ 2000/ XP/
Server 2003/ Vista/ 7
Instruction Manual
3
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selec tion of online tools,
documentation, and downloads.
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for
the periods noted, following the initial date of purchase. During this period, the products may
be returned for repair, or replacement with equivalent products at our discretion. The warranty
covers par ts and labor costs only. StarTech.com does not warrant its products from defects or
damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,
directors, employees or agents) for any damages (whether direct or indirect, special, punitive,
incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,
arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If
such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Instruction Manual
4
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.