2 m CAT6 Cable - Slim - Snagless RJ45 Connectors - Blue
Product ID: N6PAT200CMBLS
Thisslim CAT6 cablemeets all Category 6 patch cable specifications todeliverareliable Gigabit network connection in
high-density data center applications.
The design of this slim CAT6 patch cord is 36% thinner than standard networking cables, which allows better airflow
and heat dissipation in tight spaces. The cable is also more flexible than standard Ethernet cables, so cable runs are
easier in crowded network racks.
This cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to
snag or break as you pull them through narrow spaces.
This CAT6 patch cable is tested to comply with ANSI/TIA 568 C.2 Category 6 requirements ensuring a reliable
connection to your networking equipment. Certified with Low Smoke Zero Halogen (LSZH) fire rating, this patch cord
ensures a safe connection.
The 50-micron gold connectors on the patch cable deliver optimum conductivity and eliminate signal loss due to
oxidation or corrosion.
Each CAT6 cable is manufactured using high-quality copper conductors and is carefully constructed and tested to
keep Near-End Crosstalk (NEXT) well within acceptable limits. Plus, each cable isbuilt with 28 AWG copper wire, to
ensure peak performance for your demanding Ethernetapplications.
N6PAT200CMBLSis backed by StarTech.com lifetime warranty and free lifetime technical support.
Certifications, Reports and Compatibility
Applications
Warranty
Number of Conductors
Connector Plating
Cable Jacket Material
Fire Rating
Cable Type
Wiring Standard
90 Days
4 pair UTP
Gold
PVC - Polyvinyl Chloride
LSZH Rated (Low Smoke Zero Halogen)
Snagless
TIA/EIA-568-B.1-2001 T568B
Color
Wire Gauge
Conductor Type
Cable Length
Product Length
Product Width
Product Height
Weight of Product
Blue
28 AWG
Stranded Copper
6.6 ft [2 m]
6.6 ft [2.0 m]
1.2 in [30.000 mm]
0.4 in [10.000 mm]
1.3 oz [38.000 g]
Package Length
Package Width
Package Height
7.9 in [2.0 cm]
8.7 in [2.2 cm]
0.0 in [0.100 mm]
• For installation in high-density data centers
• Designed for use with Gigabit networks
Features
• 36% slimmer cable for flexible installations in crowded network closets and cable-management panels
• Built with 28 AWG copper wire to ensure a peak performance for your demanding Ethernetapplications
• Meets ANSI/TIA-568-C.2 CAT6 requirements for reliable patch cord performance
• RJ45 connector-clip protectors eliminate cable snags and breaks during installation
• Ensure a high-performance connection with 50-micron gold-plated connectors