arTech IES101GP2SFW Service Manual

8-Port PoE+ Gigabit Ethernet Switch
with 2 SFP Connections - Managed

IES101GP2SFW

*actual product may vary from photos

FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com

For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/IES101GP2SFW.

Manual Revision: 01/19/2017

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Quick-start guide

Table of Contents

Introduction ............................................................................................1

Product diagram ........................................................................................................................................ 1

Package contents ...................................................................................................................................... 2

Requirements ............................................................................................................................................. 3

About the LED indicators ......................................................................3

Insert an SFP transceiver into the switch ...........................................4

Wire the power inputs ...........................................................................4

Reboot the network switch ..................................................................4

Reset to the default factory settings ..................................................5

Installation ..............................................................................................6

Install the network switch onto a wall ............................................................................................... 6

Install the switch onto a magnetic surface ...................................................................................... 7

Mount the switch onto a DIN rail ........................................................................................................ 8

Technical support ...................................................................................9

Warranty information ............................................................................9

Quick-start guide

i

Introduction

Use the IES101GP2SFW to add up to 10 GbE devices to your network. The
IES101GP2SFW features eight RJ45 ports, two SFP connections, and management
support. All eight of the RJ45 ports on this network switch supports Power over
Ethernet plus up to 36 watts on each port.

Product diagram

Front view

Mounting hole

3-pin terminal
block

DC power input

Mounting hole

Quick-start guide

RJ45 ports 1 to 4

RJ45 ports 5 to 8

1

Mounting hole

Power LED

SFP link and
activity LEDs

RJ45 link and
activity LEDs
(2 per port)

Mounting hole