
60x25mm Computer Gehäuse Lüfter - doppelt
Kugelgelagert mit 3pin TX3
Product ID: FAN6X25TX3H
This 6cm x 2.5cm (5000 RPM) Computer Case Fan helps prevent computer systems from overheating,
thereby increasing efficiency and stability.
The fan features a TX3 connection and a built-in tachometer that sends RPM signals to your motherboard
- a high-performance solution that can help avoid overheating and system failure.
www.startech.com
1 800 265 1844

Certifications, Reports
and Compatibility
Applications
• Replace a noisy or failed computer case fan
• Install into a computer chassis to increase air flow and cooling
Features
• Dual ball bearing design
• 3-pin connector with tachometer wire
• Higher speed 5000 RPM operation
www.startech.com
1 800 265 1844

Warranty 2 Years
Hardware Anzahl von Leitern 3
Lüfterlagertyp Kugellager
Leistung Geräuschpegel 30 dBA
Lüfterdrehzahl 5000
Luftzirkulationsrate 26.63 CFM
Steckverbinder Steckverbindertyp(en) 1 - Molex-Lüfter (3-polig, TX3) Buchse
Strom Eingangsspannung 12 DC
Umwelt Betriebstemperatur -10°C to 80°C (14°F to 176°F)
Physische Eigenschaften Farbe Schwarz
Gehäusetyp Kunststoff
Kabellänge 9 in [228.6 mm]
Produktbreite 2.4 in [60 mm]
Produktgewicht 0.9 oz [25 g]
Produkthöhe 1 in [25 mm]
Produktlänge 2.4 in [60 mm]
Verpackungsinformationen Versandgewicht (Verpackung) 0.2 lb [0.1 kg]
Verpackungsinhalt Im Paket enthalten 1 - 60mm Case Fan
Product appearance and specifications are subject to change without notice.
www.startech.com
1 800 265 1844