Artchief AT23G User Manual

CM-20 / CM30
Instruction Manual
INSTRUCTION MANUAL
MODEL: CM20 (whole set) / CM30 (without wireless headphone)
INTRODUCTION & WARNINGS
Thank you for purchasing this iPod Universal Docking System with built-in amplifier, wireless speakers & wireless headphone (only available in CM20 system), the result of our advanced state-of-the-art electronic design. To achieve the best results from this product, please read this manual carefully before operating this product.
In no circumstances attempt to open this product. The presence of high voltages or radio frequency emissions means that maintenance should only be carried out by the appointed service centers.
ATTENTION
To avoid risk of electric shock, DO NOT exposes this product to water or
dampness.
The technical assistance service manual contains important
maintenance instructions for the safety of the product.
PRECAUTIONS
DO NOT Place this product on a very hot or very cold surface & keep
out of direct sunlight.
Avoid using or storing the product in a dusty or damp area, in any
unstable location or in any magnetic zone.
Always keep & operate this product in a well-ventilated environment.
DO NOT use petrol, gasoline, thinners or any solvent to clean the
product.
Remove dust or stains with a damp cloth only.
Do not use oil or grease any mechanical parts. All moving parts in this
produce were thoroughly lubricated & sealed in the factory & require no further lubrication.
If any liquids should accidentally fall on or get in to the product,
immediately switch off the power &contact an authorized service center or a qualified & registered electrician for assistance. Before using the product with the approved power adapter provided, ensure the electric
power supply in your country is compatible with the voltage rating of the provided power adapter.
Use ONLY the provided power adapter. Never use other power
adapters even if they have the same specifications or rating.
Do not insert or remove the power adapter for the electric outlet with wet
or damp hands.
Remove the power adapter from the electric outlet if the product is not in
use for a long time.
When inserting or removing the power adapter from any electric outlet,
pull the plug only.
Never pull or jerk the cable to avoid the risk of electric shock due to
damage to the cable.
NOTE: Due to continuing development of the products, the specifications and design of this product is subject to change without prior notice.
SYSTEM COMPONENTS
1. 1 x iPod Universal Docking
2. 5 x 1 specific iPod adapter A. #3 – iPod mini (4GB, 6GB) B. #6 – iPod photo & Color U2 iPod (20GB, 30GB) & iPod with color
display (20GB) C. #7 – iPod photo (40GB, 60GB) & iPod with color display (60GB) D. #8 – iPod nano (2GB, 4GB) E. #11 – iPod nano_2nd generation (2GB, 4GB, 8GB)
3. 1 x Wireless Speaker
4. 1 x Wireless Speaker (only available in CM20)
5. 1 x 12V AC/DC Power Adapter for docking use
6. 1 x RCA Cable to 3.5mm Plug Cable (for Audio use in your TV or similar) <optional>
7. 1 x 3.5mm Plug (3-pole) Cable to 2 x 3.5mm Plug (2-pole) Cable <optional>
8. 1 x USB 2.0 Cable <optional>
POSITION OF CONTROLS
Docking Part
A2
B4
A1
A4 A3 B3
B5
A1. Docking (remember to place with your suitable iPod adapter)
B1
B2
A2. Antenna A3. Volume Control A4. Power Indicator
B1. Power Switch (Off / On plus Amplifier function / On plus Wireless function) B2. 12V DC Power Socket B3. Audio In B4. Audio Out B5. USB slot for synchronizing with PC
Docking Adapter Part
We provided the iPod adapters, which are suitable for mini iPod (#3), iPod Photo/Color 20G_30G (#6), iPod Photo/Color 40G_60G (#7), iPod nano (#8) & iPod nano 2nd (#11)
Loading...
+ 7 hidden pages