ART SGE MACHK II MULTI-EFFECTS User Manual

Specifications and Main Features

  • Model Number: SGE MACH II
  • Audio Inputs And Outputs: Professional audio 1/4” phone connectors
  • Type Of Midi Connection: five pin DIN plug
  • Configuration for Input:
  • SINGLE ended (unbalanced) for both LEFT and RIGHT inputs
  • 1M ohm as input impedance
  • For Single input automatic signal connection is made.
  • Configuration for Output:
  • SINGLE ended (unbalanced) for both LEFT and RIGHT Outputs.
  • 1.0K ohm for source impedance,
  • Enables stereo and mono output,
  • Details regarding the output of processed signal.

-Signal Processing:

  • A true stereo processing ability.
  • Processing of dynamic effects.
  • Signal Control:
  • Control the input level for -20dB to +16dB somewhere in the region.
  • Control the mix which is used for adjusting the ratio of dry and processed signals.
  • Control the output level for master output level which is switchable.
  • Types of Indicators:

-Panel lamps for input level indication for four,

-A 7 segment display for indicating the operation mode and preset number,

-A LCD for preset title and preset parameter indication.

  • Features for Memory:

-200 presets are available,

-Tools to add and delete effects when in edit-mode are available, MIDI enables the user to set up to eight parameters.

  • Dynamic Effects: Compressor, Limiter, Distortion, Expander, and Noise Gate fall under this category.
  • Digital Effects: Employ algorithms for Flanger, chorus, digital delay and reverb.

–Sampler Feature: For Various Long and Short Sampling with Either Configuration or Playback Mode

–Remote Jack: Comes with bypass or sample trigger mode to increment preset types

- MIDI Features: Connect with External MIDI Devices and Effortless Tracking Of Received or Transmitted MIDI Event Data

- User Accessible Adjustment: Changing of Action Parameters Display[s] using Control Functions of Buttons

Frequently Asked Questions

Q1: What type of audio input and output does SGE MACH II accommodate?

A1: SGE MACH II equips professional audio input units of a quarter inch phone jack input for connectivity.

Q2: Is it recommended to connect the microphone directly to the SGE MACH II?

A2: Connecting the microphone directly to SGE MACH II is not advisable as proper amplifying circuitry is required for distortion free audio detection.

Q3: How many programs or settings can the SGE MACH II save as presets?

A3: Over 200 programs can be stored as presets with SGE MACH II.

Q4: What input level is acceptable for the equipment to connote?

A4: For one to convey meaningful output levels, input levels should be anything close to -20dBV thereby maintaining audio integrity of no more than +16dBV.

Q5: Is changing the signal ratio of frank and modified signals possible?

A5: Yes, ratio of frank to modified signals can easily be altered by manipulating the control mix.

Q6: Give a few illustrations of effects that are dynamic in nature?

A6: Effects include but are not limited to Distortion, Compressor, Expander or Limiter.

Q7: MASH II does have MIDI functionality. Is this correct?

A7: Quite right. There are built-in midi capabilities that allow communication with other midi devices with programmable abilities.

Q8: Is there a device that can sample what was being played?

A8: To address this concern, Yes, SGE MACH II has a sampler feature where you have the options for short and long sampling.

Q9: What steps do I need to follow to edit a preset?

A9: No preset sahowing is available but you can go into edit mode and press ADD or DELETE EFFECT buttons to edit saved presets.

Q10: Are there signals levels indicator?

A10: There are four inputs signal levels indicator embedded in the device constituting of four bolts which are put on the front of the chassis.

User Manual

ART SGE MACHK II MULTI-EFFECTS User Manual
Loading...
+ 16 hidden pages