ART) Phantom III User Manual

Page 1
ARTcessories
Creative audio solutions in cool little boxes.
March 2003
Phantom III
48V Phantom Power Supply
Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be “more is better.” For example, a 24-volt condenser mic will run perfectly on 48 volts. In fact mics rated at as little as 9 volts can often operate on 48 volts,but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so,for a 48V mic, you would obtain best results with 48 volts of phantom power.
Specifications:
• Output Phantom Power:48V DC +/- 2V
• Input Connector: XLR female
• Output connector: XLR male
• Output Noise: -115 dBV
• Frequency Response:10Hz – 25kHz
• Current Drain:14mA
• Power:18V AC (Adapter included)
• Dimensions:5.25 x 2.75 x 1.75 inches (130mm x 74mm x 45mm)
• Weight:1.3 lbs. (315g)
Usage:
a.) Plug the AC adapter into the 18V AC connector and plug the
other end into a 120V AC power outlet. b.) Connect mic cable to the female XLR Input connector. c.) Using another mic cable, patch from the adjacent (male)
Output connector to a mic input on the mixer.
90 DAY
WARRANTY
DESIGNED & DISTRIBUTED BY:APPLIED RESEARCH AND TECHNOLOGY • 215 Tremont Street• Rochester, New York 14608 • USA For Customer Service,please call: 585.436.2720 • Email: cser ve@artproaudio.com • www.artproaudio.com • ART-ARTcs-03/03
Loading...