Specifications and Main Features
- Indicator: 4 LED indicators to display the level of the signal without sound.
- Control: It can be varied from approximately -20dB to +16dB.
- Mix: Effect signal can be varied from dry only to all effects to dry only.
- Output Level: The output can be controlled from 0% to 100% output.
- Display: 7 Segment Display (Operation Mode and Preset Number), LCD (detailed preset information).
- Connection: Professional 1/4” phone plugs for audio in/out; MIDI – 5pin din socket.
- Input: Left and Right input is also unbalanced and has a 1M ohm impedance.
- Output: Left and Right are single-ended (unbalanced) outputs with a 1K ohm source impedance.
- Working in true stereo mode.
- DSP: 20-bit digital signal processor with ultra high speed .
- MIDI: Performance MIDI, MIDI program change, and MIDI channels supported.
- Memory: user memory 6000 bytes approximately; 200 presets with editable presets and locations (110 of which are unchangeable factory settings).
- Effect: There are 22 categories of algorithms, such as reverb, delay, flanger, etc. in different effects.
- Sampler: Recording of an event either manually or automatically ; Options during playback include single, repeat, and the length can be varied from 0.02s to 2.00s.
- Power Lock: Maintains default and MIDI channel information even without power for a maximum of 4 years.
- Development: A steel single high 19” rack mount enclosure.
Frequently Asked Questions
Q: Are there any available audio input options for the MULTIVERB III?
A: There are left and right unbalanced inputs available which can be considered as the single type of audio input that this device has, with the impedance of 1M ohm.
Q: The output level how can I manage it?
A: There’s a knob where you can adjust the output level percent from 0% up to 100% on the front panel.
Q: Do I need to ask does the MULTIVERB III support MIDI?
A: Under this section replying self quest expresses that yes it is able to support almost every midi device including performance midi and program changes.
Q: Can I save my own presets?
A: Out of 200 available presets, 110 can be edited mpst of them are presettable and the rest are editable.
Q: Do you have an idea how long does the battery backup retain memory?
A: The backup can provide the memory retention for 4 years with power off.
Q: Can the MULTIVERB III be employed solely as a preamp?
A: The device in question was never intended to be employed solely as a standalone preamp.
Q: Can youamply use multiple effects simultaneously?
A: Yes, but only as allowed by the device’s internal algorithms, whereby they could be included in the processing chain.
Q: Is the MULTIVERB III endowed with a specific type of display?
A: The unit is equipped with a Seven Segment Display meant for the identification of moes, preset numbers, and also an LCD display that indicates the particular effect and its parameters
User Manual
Loading...