Arrow Hart - Cooper Wiring Devices Support Grips SDT Series Catalog Page

Q-22

WIRE MESH
GRIPS

INDUSTRIAL

Single Eye,
Heavy Duty

Universal Eye,

Heavy Duty

Support Grips SDT Series

Service Drops
Heavy Duty
Single Eye and
Universal Bail

APPLICATIONS

■ Heavy-duty support of all types of suspended

service cables indoor or outdoor.

■ Service entrance, cable TV, telephone,

fiber optics in sloping, vertical and
horizontal positions.

FEATURES

■ Gripping action increases in direct proportion

to the amount of tension applied to cable.

■ Double weave variable mesh construction.

■ Wire mesh is produced from high quality,

non-magnetic, tin coated bronze which
provides superior corrosion resistance.

■ Stainless steel support grips and

special lengths are available upon
request. Consult factory.

■ Available in cable ranges from 0.23"-

1.25" (.58-3.18cm) and mesh lengths
up to 14 inches (35.56cm).

Single Eye, Heavy Duty

E = Eye length M = Mesh length at nominal diameter

Universal Eye, Heavy Duty

Caution:

Never use grips to approximate breaking strength. Refer to Wire Mesh Grips

Introduction for safety and working load factors.

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.23-.31 (.58-.79) 500 (2,224) 5 (12.7) 5 (12.7) SDTS23

.32-.43 (.81-1.09) 500 (2,224) 6 (15.24) 6.5 (16.51) SDTS32

.43-.56 (1.09-1.42) 870 (3,870) 6 (15.24) 8 (20.32) SDTS43

.56-.73 (1.42-1.85) 1050 (4,670) 7 (17.78) 9 (22.86) SDTS56

.73-.85 (1.85-2.16) 1390 (6,183) 8 (20.32) 10.5 (26.67) SDTS73

.85-1.00 (2.16-2.54) 1790 (7,962) 8 (20.32) 12 (30.48) SDTS85

1.00-1.25 (2.54-3.18) 1790 (7,962) 9 (22.86) 14 (35.56) SDTS100

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.23-.31 (.58-.79) 500 (2,224) 9 (22.86) 5 (12.7) SDTU23

.32-.43 (.81-1.09) 500 (2,224) 10 (25.4) 6.5 (16.51) SDTU32

.43-.56 (1.09-1.42) 870 (3,870) 12 (30.48) 8 (20.32) SDTU43

.56-.73 (1.42-1.85) 1050 (4,670) 13 (33.02) 9.5 (24.13) SDTU56

.73-.85 (1.85-2.16) 1390 (6,183) 14 (35.56) 10.5 (26.67) SDTU73

.85-1.00 (2.16-2.54) 1790 (7,962) 14 (35.56) 12 (30.48) SDTU85

1.00-1.25 (2.54-3.18) 1790 (7,962) 15 (38.1) 14 (35.56) SDTU100

Support Grips SDT Series