Armytek Elf C1 Micro-USB, Elf C2 Micro-USB Service Manual

Model

Elf C1 Micro-USB

Elf C2 Micro-USB

LED / Optics

Cree XP-L / TIR

Brightness stabilization type

DIGITAL (CPU brightness control)

Light output, LED / OTF lumens*

1050 / 900

Peak beam intensity, candelas

2830

Hotspot / spill

70° / 1 20°

Beam distance*

106 meters

Modes, light output (OTF lumens*)
and runtimes (measured with
18350 Li-Ion 900 mAh /
18650 Li-Ion 3400mAh until the
light output drops to 10% of the
initial value)

Turbo

900 lm / 40min

900 lm / 2h

Main3

340 lm / 1h

340 lm / 4h

Main2

150 lm / 2.5h

150 lm / 10.5h

Main1

30 lm / 15h

30 lm / 55h

Firefly2

2.3 lm / 7d

2.3 lm / 25d

Firefly1

0.4 lm / 54d

0.4 lm / 200d

Power source

1x18350 Li-Ion

1x18650 Li-Ion

Size and weight (without batteries)

Length 83mm, body diameter 24.5mm, head
diameter 29mm, weight 62g

Length 112mm, body diameter 24.5mm, head
diameter 29mm, weight 65g

Warnings

1. Always follow the instructions from this manual and recommendations on battery usage.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

4. Do not use different power sources together, i.e. old ones with new ones, charged with

discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.

5. Do not modify or recast the flashlight and its components as it will deprive you of the

warranty.

6. Do not allow water or any other liquid to leak into the flashlight.

7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary

blindness.

8. Do not allow children to use the flashlight without your assistance.

The producer will not be liable for any harm done to the user if it was caused by
improper use of the product.

Care and Storage

It is recommended to clean the threads and O-rings off dirt and old grease once or twice per year. Remember that reliable protection
from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.

To clean the threads do the following:

1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).

2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged

replace it by a new one.

3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as

it can cause fails in functionality of the flashlight.

After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.

In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required.

Elf Micro-USB

THE MOST TECHNICALLY ADVANCED

USER MANUAL

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

Specifications

Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan. .10 years no-hassle warranty

§ Amazingly powerful multi-flashlight with up to 1050 LED lumens brightness powered by only one battery.

§ Rechargeable flashlight with Micro-USB cable.

§ TIR optics with light angles 70°:120° for wide light without a “tunnel vision” effect.

§ Reliable headband made of soft elastic material for comfortable fixation of the lamp on the head.

§ Easy operation and 6 convenient brightness modes.

§ Due to a side switch button you can operate the multi-flashlight easily with one hand without shifting it aside.

§ Magnet in the tailcap, removable clip and possibility of tail-stand for multipurpose use.

§ Compact and light-weight but at the same time durable and multi-functional flashlight.

§ Record runtimes – up to 200 days of operation on one battery.

§ Removable clip for fixation on a belt and flat tailcap for vertical standing.

§ Total protection from water, dirt and dust penetration – flashlight continues to work even at the depth of 10 meters. Solid body

without long wires, weak rubber connectors and unnecessary boxes.

§ Multicolor State Indication and ultra low current drain in OFF-state – more than 25 years.

Armytek provides free warranty repair for 10 years (excluding batteries, chargers, switches and connectors which have 2 years
warranty) from the date of buy with the document confirming the purchase.

Guarantee does not extend to damage during:

1. Improper usage.

2. Attempts to modify or repair the flashlight by nonqualified specialists.

3. Longtime application in chlorinated or polluted water, or other liquids (other than water).

4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).

5. Usage of low-quality batteries.

Service and Warranty

Web: www.armytek.com Email: [e-mail]

Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada

Specifications are subject to change without notice.

Armytek Optoelectronics Inc.

* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.

Remember that old or low-quality disposal batteries can be damaged under heavy load and explode.

Set description

Operation

Items included in the package:

2 3

1

7

8

4

6

5

x2

1 - Flashlight
2 - Clip
3 - User manual

8 - Headband (2 straps

for Elf C2 Micro-USB)

9 - Plastic holder

4 - 2 spare O-rings

5 - 18650 Li-Ion battery (Elf C2 Micro-USB)

9

18350 Li-Ion battery (Elf C1 Micro-USB)

6 - Magnet

Elf Micro-USB

ь Your flashlight can inconsiderably differ from the pictures in the manual.
ь The producer reserves the right to change the package at his own discretion without modifying this manual.

7 - Lanyard

Initial Service

1. 2.

We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can
leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in then
use new and high-quality batteries and store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at
least once a month. If you have noticed any signs of batteries' defects then withdraw them from the flashlight and utilize. It is also recommended
to replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.

To use the headmount with the flashlight:

Pass the end of the band B through the clasp.

1.

(for Elf C2 Micro-USB)

a

B

3.

3.

4.

Pass the band A through the eye of the band B.

2.

(for Elf C2 Micro-USB)

To set/replace batteries:

1. Unscrew the tailcap.

2. Place the batteries with the positive contact (+) facing

the head of the flashlight.

3. Adjust the tailcap and tighten it as far as it can go.

The flashlight is ready for operation.

Put in the band A in the first clasp.

A

Pass the end of the band A through the second clasp and fix it.

A

B

Put in the bands through the

A

5.

slots in the plastic holder
and fix the flashlight. Adjust
elastic bands to the size of
your head.

Click x1

Press & Hold

Click x2

Press & Hold

Warning

2 sec

< 25%

Warning

2 sec

WARM HOT

Flashlight charging

OFF

Main

OFF вMain (if last used)

Firefly

OFF вFirefly1 вFirefly2

Turbo

ON в Turbo

Turbo в

Last mode

Cycling through Modes

Main1 вMain2

ез

Main3

Low Battery Indication

Critical

1 sec

< 10%

High Temperature Indication

Critical

1 sec

Flashlight charging. Turn off the flashlight and connect the cable. The color of the button displays

the charging stage: red – the flashlight is charging, green – the flashlight is charged. If there is no
indication, the battery is removed or installed in the wrong polarity. Approximate time for charging

a fully discharged battery is 6-8 hours. We recommend using adapters with 1A and higher.

Lamp mode. The flashlight can work in lamp mode without battery, in Firefly1, Firefly2, Main1 and

Main2 modes. To do this, connect the cable and remove the battery. In this mode, the selection of
brightness modes is carried out by holding the button. Turn on and off – click. There is no color
indication in the lamp mode.

In OFF state:

Click: To turn on the last used mode.
Press and hold: To go through 2 Firefly modes (release to

select). Keeping button pressed will start cycling through the
Main modes.

In ON state:

Click: To turn off the flashlight.
Press and hold: To start cycling through the Main modes.
Double click: To turn on the Turbo mode. The second

double click brings back the last used mode.

For comfortable operation you have a convenient
momentary access to all the following modes:

Main. Short click from OFF-state activates the Main mode (if it
was the last mode used previously).

Firefly. Press and hold the button in OFF-state to turn on the
desired Firefly mode and then release immediately. Keeping
the button pressed will start cycling through the Main modes.

Turbo. The mode is activated by double click, when the
flashlight is on. To return to the last mode make double-click

again.

Cycling through the Main modes. In ON-state press and hold
the button (in any mode): the 3 Main modes will start
switching cyclically. Release the button to select the desired
mode. In Turbo mode it starts cycling through the Main

modes.

Automemorizing. After switching off the last used Mode is
memorized for quick 1-click access at next switching on.

Lock- out function. Unscrew the tailcap to 1/4 for the
protection from accidental switching on.

Warnin g i ndi catio n s hows the b atter y l evel and t he
temperature inside the flashlight.

Low battery level. When it is < 25%, the color LED will show
the warning level – flashing in orange color once in 2 second.
With a further voltage reducing brightness will star t to
decrease in steps for safety of the battery and user. If
brightness will be <25% from nominal value, the main LED
will flash 2 times. Critical battery level <10% is red indicated
once a second.

High temperature. When it increases to the warning level – the
color LED flashes by orange 3 times once in 2 seconds. At
critical level – it flashes by red 3 times once in 1 second,
brightness starts to reduce. After cooling down the brightness
increases to usual level.