Armor VCIEMITTERCF33, VCIFOAM0205, VCIFOAM, VCIFOAM0101 User Manual

Safety Data Sheet
ARMOR Shield® MPI Foam Emitter - Blue
_____________________________________________________________________________________________
International HQ
www.armorvci.com www.workshophero.com
Page 1 / 9 Verified Release Date: 05-16-18 Revision 1.4
1. IDENTIFICATION
Product Identifier
Product Name
ARMOR SHIELD Emitter / Pads and Shields
Other means of identification
SDS #
APPAC-001
Recommended use of the chemical and restrictions on use
Recommended Use
Corrosion inhibiting device.
Details of the supplier of the safety data sheet
Supplier Address
Armor Protective Packaging 1551 North Burkhart Rd Howell, MI 48855
Emergency Telephone Number
Company Phone Number
Phone: 1-517-546-1117 Fax: 1-517-546-6434
Emergency Telephone (24 hr)
INFOTRAC 1-352-323-3500 (International) 1-800-535-5053 (North America)
2. HAZARDS IDENTIFICATION
Appearance Solid foam-like article
Physical State Solid
Odor Ammoniacal
Classification
Acute toxicity - Inhalation (Dusts)
Category 4
Signal Word Warning
Hazard Statements
Harmful if inhaled
Safety Data Sheet
ARMOR Shield® MPI Foam Emitter - Blue
_____________________________________________________________________________________________
International HQ
www.armorvci.com www.workshophero.com
Page 2 / 9 Verified Release Date: 05-16-18 Revision 1.4
Precautionary Statements - Prevention
Avoid breathing dust / vapors Use in a well-ventilated area
Precautionary Statements - Response
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing Call a poison center or doctor/physician if you feel unwell
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Nature
Polymer binder with Volatile Corrosion Inhibitor Additives.
Chemical Name
CAS No
Weight-%
Proprietary
Proprietary
70-80
Proprietary
Proprietary
<5
Proprietary
Proprietary
<5
Proprietary
Proprietary
<1
Proprietary
Proprietary
<1
**If Chemical Name/CAS No is "proprietary" and/or Weight-% is listed as a range, the specific chemical identity and/or percentage of composition has been withheld as a trade secret.**
4. FIRST-AID MEASURES
First Aid Measures
Eye Contact
Do not rub eyes. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists: Get medical advice/attention.
Skin Contact
IF ON SKIN: Wash with plenty of soap and water. If skin irritation persists, call a physician.
Inhalation
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a poison center or doctor/physician if you feel unwell.
Ingestion
IF SWALLOWED: Clean mouth with water and drink afterwards plenty of water. Call a physician.
Most important symptoms and effects
Symptoms
May irritate eyes by rubbing eyes while handling material. Irritation and allergic dermatitis are possible. Harmful if inhaled. Can cause irritation to mouth, esophagus and stomach.
Safety Data Sheet
ARMOR Shield® MPI Foam Emitter - Blue
_____________________________________________________________________________________________
International HQ
www.armorvci.com www.workshophero.com
Page 3 / 9 Verified Release Date: 05-16-18 Revision 1.4
Indication of any immediate medical attention and special treatment needed Notes to Physician
Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Water spray (fog). Foam. Carbon dioxide (CO2). Dry chemical.
Unsuitable Extinguishing Media
Not determined.
Specific Hazards Arising from the Chemical
Not determined.
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Use personal protective equipment as required.
Environmental Precautions
Prevent from entering into soil, ditches, sewers, and waterways. See Section 12, Ecological Information. See Section 13: DISPOSAL CONSIDERATIONS.
Methods and material for containment and cleaning up
Methods for Containment and Clean-Up
Sweep up all material and return to suitable container.
7. HANDLING AND STORAGE
Precautions for safe handling
Loading...
+ 6 hidden pages