Armor PVCISF80GB181500, PVCIBAG4MB554568, PVCIBAG4MB231746, PVCIBAG4MB161021IC, PVCIBAG2MB504880 User Manual
...
SAFETY DATA SHEET
ARMOR POLY® VCI Films
_____________________________________________________________________________________________________________________
International HQ
1551 North Burkhart Road ● Howell, MI 48855 USA Ph. 517-546-1117 ● Toll Free 800-365-1117 ● Fax 517-546-6434
www.armorvci.com ● www.workshophero.com
Page 1 / 8 Verified Release Date: 08-14-18 Revision 1.1
1. IDENTIFICATION
Product Identifier
Product Name
ARMOR POLY VCI (Mono, Co-Extruded, Foundry, ES, HD & Stretch Films)
Other means of identification
SDS #
APPAC-005
Recommended use of the chemical and restrictions on use
Recommended Use
Corrosion Resistant Plastic Packaging Material for Ferrous & Non-Ferrous Metals.
Details of the supplier of the safety data sheet
Supplier Address
Armor Protective Packaging
1551 North Burkhart Rd
Howell, MI 48855
Emergency Telephone Number
Company Phone Number
Phone: 1-517-546-1117
Fax: 1-517-546-6434
2. HAZARDS IDENTIFICATION
Appearance Clear or colored film (Sheets
or bags)
Physical state Solid
Odor Bland to ammonia
Classification
This material is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200).
Hazards Not Otherwise Classified (HNOC)
May be harmful if swallowed
Other hazards
Harmful to aquatic life with long lasting effects
HNOCS are OSHA identified hazards that fall outside the scope of traditional classification. The material is hazardous, in this case it may be
harmful if swallowed, but it does NOT require the traditional hazard information like a pictogram, hazard statement, etc
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name
CAS No
Weight-%
Proprietary
Proprietary
< 5%
**If Chemical Name/CAS No is "proprietary" and/or Weight-% is listed as a range, the specific chemical identity and/or percentage
of composition has been withheld as a trade secret.**
SAFETY DATA SHEET
ARMOR POLY® VCI Films
_____________________________________________________________________________________________________________________
International HQ
1551 North Burkhart Road ● Howell, MI 48855 USA Ph. 517-546-1117 ● Toll Free 800-365-1117 ● Fax 517-546-6434
www.armorvci.com ● www.workshophero.com
Page 2 / 8 Verified Release Date: 08-14-18 Revision 1.1
4. FIRST-AID MEASURES
First Aid Measures
Eye Contact
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids.
Consult a physician.
Skin Contact
Wash off immediately with plenty of water for at least 15 minutes.
Inhalation
Remove to fresh air.
Ingestion
Clean mouth with water and drink afterwards plenty of water.
Most important symptoms and effects
Symptoms
May be harmful if swallowed.
Indication of any immediate medical attention and special treatment needed
Notes to Physician
Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable Extinguishing Media
Not determined.
Specific Hazards Arising from the Chemical
Not determined.
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Use personal protective equipment as required.
Methods and material for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so.
Methods for Clean-Up
Keep in suitable, closed containers
for disposal
SAFETY DATA SHEET
ARMOR POLY® VCI Films
_____________________________________________________________________________________________________________________
International HQ
1551 North Burkhart Road ● Howell, MI 48855 USA Ph. 517-546-1117 ● Toll Free 800-365-1117 ● Fax 517-546-6434
www.armorvci.com ● www.workshophero.com
Page 3 / 8 Verified Release Date: 08-14-18 Revision 1.1
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on Safe Handling
Handle in accordance with good industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Store in a dry, cool and well-ventilated place.
Incompatible Materials
Strong acids. Caustics.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region specific regulatory bodies
Appropriate engineering controls
Engineering Controls
Apply technical measures to comply with the occupational exposure limits.
Individual protection measures, such as personal protective equipment
Eye/Face Protection
Refer to 29 CFR 1910.133 for eye and face protection regulations.
Skin and Body Protection
Refer to 29 CFR 1910.138 for appropriate skin and body protection.
Respiratory Protection
Refer to 29 CFR 1910.134 for respiratory protection requirements.
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state
Solid
Appearance
Clear or colored film (Sheets or bags)
Odor
Bland to ammonia
Color
Various
Odor Threshold
Not determined
Property
Values
Remarks • Method
pH
Not determined
Melting Point/Freezing Point
103-115 °C / 219-239 °F
Boiling Point/Boiling Range
Not determined
Flash Point
Not determined
Evaporation Rate
Not determined
Flammability (Solid, Gas)
Not determined
Flammability Limits in Air
Loading...