Names and marks appearing on the products herein are either registered trademarks
or trademarks of FLIR Commercial Systems, Inc. and/or its subsidiaries. All other
trademarks, trade names, or company names referenced herein are used for
identification only and are the property of their respective owners.
This product is protected by patents, design patents, patents pending, or design patents
pending.
If you have questions that are not covered in this manual, or need service, contact FLIR
Commercial Vision Systems, Inc. customer support at 805.964.9797 for additional
information prior to returning a camera.
The contents of this document are subject to change. For additional information visit
www.flir.com or write to FLIR Commercial Systems, Inc., 70 Castilian Drive, Goleta CA
93117.
Proper Disposal of Electrical and Electronic Equipment (EEE)
The European Union (EU) has enacted Waste Electrical and
Electronic Equipment Directive 2002/96/EC (WEEE), which aims to
prevent EEE waste from arising; to encourage reuse, recycling, and
recovery of EEE waste; and to promote environmental responsibility.
In accordance with these regulations, all EEE products labeled with
the “crossed out wheeled bin” either on the product itself or in the
mixed with regular household or other commercial waste, or by other regular municipal
waste collection means. Instead, and in order to prevent possible harm to the
environment or human health, all EEE products (including any cables that came with the
product) should be responsibly discarded or recycled.
To identify a responsible disposal method where you live, please contact your local waste
collection or recycling service, your original place of purchase or product supplier, or the
responsible government authority in your area. Business users should contact their
supplier or refer to their purchase contract.
This document is controlled to FLIR Technology Level EAR 1. The information contained
in this document is proprietary and/or restricted and pertains to a dual use product
controlled for export by the Export Administration Regulations (EAR). This document and
data disclosed herein or herewith is not to be reproduced, used, or disclosed in whole or
in part to anyone without the written permission of FLIR Systems, Inc. Diversion contrary
to US law is prohibited. US Department of Commerce authorization is not required prior
to export or transfer to foreign persons, parties, or uses otherwise prohibited.
product literature must not be disposed of in regular rubbish bins,
Scout Bi-Ocular Operator’s Manual
Important Instructions and Notices to the User:
Modification of this device without the express authorization of FLIR Commercial
Systems, Inc. may void the user’s authority under FCC rules to operate this device.
Note 1: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that the interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna;
•Increase the separation between the equipment and receiver;
•Connect the equipment into an outlet on a circuit different from that of the receiver;
and/or
•Consult the dealer or an experienced radio/television technician for help.
Note 2: This equipment was tested for compliance with the FCC limits for a Class B
digital device using a shielded cable for connecting the equipment to an analog video
output to a monitor and using a shielded USB cable for connecting the equipment to a
personal computer. When making such connection s, sh ie l de d c ab le s m us t b e u se d w it h
this equipment.
This Class B digital apparatus comp lies wi th Canadi an ICES -0 03.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FLIR’s Scout Bi-Ocular handheld thermal imaging cameras give hikers,
hunters, and outdoorsmen the ability to see clearly in total darkness,
providing a wealth of valuable information during any nighttime
excursion.
The Scout Bi-Ocular camera enables the outdoorsman to:
•See animals and difficult terrain in reduced visibility and total
darkness
•See through smoke, dust, and light fog
•See camouflage and foliage in any lighting conditions
•See more—and see farther—than with low-light night vision
goggles
The Scout Bi-Ocular camera makes images from heat, not light, a feat
impossible for the naked eye or even image intensified (I
devices, which means you can see clearly even without any visible light
at all. People, animals, and objects all make their own heat and their
own contrast, and are clearly seen by the Scout in even the most
adverse conditions.
2
) night vision
431-BTS0-00-10, Revision 1101
1—IntroductionScout Bi-Ocular Operator’s Manual
1–1Scout Bi-Ocular Camera Features
•Micro bolometer sensor for excellent image quality and clarity
•Quick Connect Hot Shoe—Provides convenient power input and
video output.
•Choose from interchangeable 35 mm, 65 mm, or 100 mm
quick-disconnect lenses (purchased separately).
•Two-sided Hand Strap—Accommodates both left-handed and
right-handed users.
•SD Card Slot—Allows for storing captured still images and video
on the removable SD card.
•Software upgrades using SD card in the field.
•USB 2.0 Connection—Rapid transfer of still images and video files
from the camera to a PC.
•Four rechargeable AA NiMH batteries—Provides up to 5 hours of
camera operation on a single charge.
•Battery charging AC adapter is included.
•Rugged design—Built to withstand the demands of outdoor use.
•Hard Carrying Case—Provides protected storage for your Scout
Bi-Ocular camera, lenses, and all accessories.
2March 2012
Scout Bi-Ocular Operator’s Manual1—Introduction
1–2Cautions
Do not disassemble the camera enclosure. Disassembly can
cause permanent damage and will void the warranty.
Keep the compartment covers closed to avoid exposing the
cameras electronics to water or debris.
Do not point the camera directly at extremely high-intensity
radiation sources, such as the sun, lasers, arc welders, etc.
Use only the supplied adapters to power or recharge the camera.
Be careful not to leave fingerprints on the camera’s optics.
Always keep the camera window covered. A lens or the lens cover
should always be installed on the camera to protect the window.
Caution!
Always keep the camera window covered. A lens or the lens cover
should always be installed on the camera to protect the window.
431-BTS0-00-10, Revision 1103
1—IntroductionScout Bi-Ocular Operator’s Manual
4March 2012
QD100
QD65
QD35
2 Getting Started
The Scout Bi-Ocular camera with accessories is shown packed in its
Hard Carrying Case. The available lenses are shown in “Lens Options”
on page 7. Refer to the packing list enclosed with your camera
shipment to determine the actual contents of your camera package
and lens or lenses you have purchased.
In addition to the camera and Hard Carrying Case, Quick Start card,
Operator’s manual, and Documentation/Training CD or DVD; the
following items are included in the camera package:
6March 2012
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.