PRIME D 3X
PRIME D 5X
Digital Night Vision Monoculars
USER’S MANUAL
Impor tant Export Res trictions ! Co mmodities, produ cts, technologi es and ser vices of thi s manu al are contro lled by the U.S.
Depar tment o f State Oce of D efense Trade Controls , in accordance with International Trac in Arms (ITAR), Title 22, Code of
Federal Regulati ons Part 120-130 and/or by the Expor t Administration Re gulations (EAR) of U.S. Depar tment of Commerce. At any
time whe n a license or a wri tten approval o f the U.S. Govern ment
is app licable to it, it i s illegal and stric tly forbidd en to exp ort, intend to export, tr ansfer in any other manner w hatsoever, sel l any
hardwar e or technical da ta, provide any a ssociated ser vice to any
non-U. S. r esident, beyond or within the United States territory,
until th e valid lice nse or writ ten approval has been i ssued by the
Depar tments of th e U.S. Gover nment h aving j urisdiction . Addi tionall y U.S. law prohibits the sale, transfer, o r export of items to
certai n rest ricted partie s, destinations, and emb argoed countries ,
as iden tied on lis ts maintaine d by the U.S . Departm ent of State,
the U.S. Department of Commerce, and t he U.S. Depar tment of
Treasury. It i s the responsib ility of the Customer to be aw are of
these lis ts. The sale, tran sfer, transport ation, or shipme nt outside of the U.S. of any product prohibited o r restricte d for expor t
without complying with U. S. export c ontrol laws and re gulations,
includin g prope r expor t licen sing, do cumentation or au thorization, is unlaw ful and may result in civil and/or cr iminal pen alties
and/or constitute a fe deral cri me. Diver sion cont rary to U.S. law
is stric tly prohibited .
2
PARTS OF THE MONOCULAR
BATTERY COMPART MENT
IR ILLUMI NATOR LE NS
OBJEC TIVE LENS CAP
RAIL
VIDEO OU TPUT
LENS FOCUS A DJUSTMENT
OPTIONAL IR94 0 DETACHABLE
LONG RANGE INFR ARED ILLUMINATOR
WITH DOVETAIL TO WEAVER
TRANSFER PIECE #21
PART#IAIR940IR000001
IR ACTIV ITY INDICATOR
POWER ON I NDICATOR
FUNCTI ON SWITCH
GAIN CONT ROL KNOB
RAIL
DIOPER A DJUSTMENT
CAUTION:
This product contains natural rubber latex, which may cause allergic reactions! The FDA
has noted an increase in the number of reported deaths that are associated with an apparent
sensitivity to natural latex proteins. If you are allergic to latex, it is a good idea to learn which
products contain it and strictly avoid exposure to those products.
The information provided in this manual is intended for familiarization with the product only; the contents may undergo fur ther changes with no commitment by Armasight to notify customers of any updates.
Armasight© assumes no responsibility for any misprints or other errors that this manual may contain.
3
1. DESCRIPTION AND DATA
DESCRIPTION
Designed to oer the best possible performance at the lowest possible cost, the Armasight Prime D
is an exceptional, digital night vision monocular. Whether you choose to use it for camping, hunting,
boating or security, the Armasight Prime D will allow you to look out into the night and unveil the nocturnal world hiding in the darkness.
Available with either 3x or 5x magnications, the Armasight Prime D is the absolute latest in the entry
level Digital night vision based on the high sensitivity CCD array. Compact and lightweight, this exceptional digital night vision monocular outperforms most other devices in its class.
FE ATU RE S
3x or 5x magnication
–
High sensitivity CCD array
–
Built-in infrared illuminator
–
Compact and lightweight
–
Video output for video recording/image capture
–
Water and fog-resistant
–
Limited Two-Year Warranty
–
SPECIFICATIONS
Item Prime D 3X Prime D 5X
Sensor Type CCD CCD
Magnication 3x 5x
Field of view (°) 20.8 20.8
Focus range (m) 1,0 to innity 1,0 to innity
Diopter adjustment (dpt) +4 to -4 +4 to -4
Exit pupil diameter (mm) 8 8
Eye relief (mm) 20 20
Power Supply
Battery life up to 4 up to 4
Tripod mount Yes Yes
Lens material glass glass
Operating temperature (°C) -30 to +50 -30 to +50
Dimensions (mm/in) 205 x 73 x 60 / 8.1 x 2.9 x 2.3 210 x 76 x 60 / 8.3 x 3.0 x 2.3
Weight w/o batteries (g/lbs) 440 / 0.97 503 / 1.1
* Armasight reserves the right to modify these specications at any time without notice
2 x CR-123 Lithium 3V 2 x CR-123 Lithium 3V
STANDARD COMPONENTS DESCRIPTION
1) Armasight Prime D Monocular
Digital night vision monocular with 3x or 5x magnication.
2) Objective Lens Cap
The objective lens cap is designed to protect the objective lens from physical damage.
4
3) Eye Cup
The rubber eye cup is designed to protect the eyepiece and to provide comfort of use for the user.
4) CR123A Lithium Battery
Two 3V CR123A lithium batteries are used to supply power to the unit.
5) User Manual
The user manual contains a full description of the device and accessories, information about controls,
installation, maintenance and troubleshooting procedures.
6) Carrying Case
The carrying case is used to store and carry the Prime D monocular and accessories.
2. PREPARATIONS FOR OPERATION
WARN ING:
The Prime D digital night vision monocular is designed for several years of reliable service.
To ensure trouble-free performance, please observe the following instructions:
• Donotopenthebodyofthedeviceorotherwisedisassembleit.
• Avoiddroppingorotherwiseimpactingthedevice.
• Donotexposethedevicetomoistureorextremetemperatures.
• Donottouchthelens.Cleanopticalpartswithaclean,softcloth,andonlyuseprofessional
lens cleaners designed for use with optics.
• Donotforgettoremovethebatteries from thebatterycompartmentifthedeviceis tobe
stored for more than 3 days.
• DonotforgettoturnthedeviceOFFduringperiodsofnon-operation.
WARN ING:
Consider the following information and restrictions in order to avoid damaging the device
and to ensure a long service life and failure-free operation:
• Performanceofthedeviceinnighttimeconditionsdependsonthelevelofambientlightinthe
environment. Some light (moonlight, starlight, etc.) is required for the device to provide an image.
• Thelevelofambientlightisreducedbythepresenceofclouds,shade,orobjectsthatblock
natural light (buildings, trees, etc.).
• Thedevicelosesitseectivenesswhenoperatedinshadowedareas.
• The eectiveness of the device is adversely aected by weather conditions such as rain,
snow, sleet, and fog, as well as environmental conditions such as smoke or dust.
• Thedeviceresolutionlevelisreduced inenvironmentswithverylowlightsources.Thevisibility will degrade signicantly under starlight conditions, particularly in low contrast environments such as deserts, large areas of uniform vegetation, etc.
BATTERIES INSTALLATION
1) Unscrew the battery compartment cap on the front
side of the monocular’s body.
2) Insert two CR123A batteries into the battery compartment in accordance with polarity markings.
3) Screw the cap into place.
5
TRIPOD INSTALLATION
The Prime D can be connected to a tripod. To mount the tripod with the Prime D device, screw the
tripod into the 1/4’’ threaded socket located on the Prime’s rail.
NOTE:
The unit may be badly damaged if the tripod collapses or falls over. Remove the unit from the
tripod if it is not within your reach.
3. OPERATION INSTRUCTIONS
CONTROLS
The Prime D is designed to meet the needs and requirements of various users. Each user can individually set the unit to the most eective and desirable position with the help of the controls. The Prime D
unit’s controls and indicators are shown and detailed further, below:
Function Switch. This switch controls the power supply to the unit and built-in IR illuminator. Use this
switch to turn the unit on and o and activation the IR illuminator.
Gain Control Knob. Adjusts the brightness of the image.
Lens Focus. This control focuses the objective lens. Adjust the lens for the clearest, sharpest image.
Diopter Adjustment. This control focuses the eyepiece. Use it to get the clearest image possible on
the IIT screen.
Power Indicator. A green light will turn on when the unit is on and ready for operation.
IR Activity Indicator. A red IR light will turn on when the IR illuminator is turned on and ready.
FOCUSING
To focus your Prime D Monocular, perform the following steps:
1) Adjust the diopter. Turn the diopter adjustment ring clockwise until it stops. While looking through
the eyepiece, observe the scene and slowly begin turning the diopter adjustment ring counterclockwise until the image becomes clear and sharp.
2) Adjust the lens’ focus. To focus your monocular at dierent distances, rotate the objective lens focus
ring.
OPERATION
1) Verify that the batteries are inserted into the battery compartment in accordance with the polarity
markings on the monocular’s body.
2) Remove the front lens cap.
3) Activate the unit by rotation the function switch from OFF to ON position. A green indicator light
will appear when device is turned on.
4) Observe the scene and focus your Prime D.
5) Adjust the image contrast by rotating the gain control knob.
6) Turn the unit OFF when you are nished using it.
7) Secure the objective lens cap over the objective lens
6
IR ILLUMINATOR OPERATION
CAUTION:
Do not forget that light emitted from the IR illuminator light is invisible to the naked eye; however, it can be easily detected when using night vision devices.
Infrared illuminators are used in areas where the level of light is not sucient for sur veillance. An IR illuminator can provide an extra source of infrared light, which, although invisible to the naked eye, can greatly
enhance the performance of night vision devices. Turn on the IR illuminator when working in total darkness.
Please remember that the beam emitted by your IR illuminator will lose its brightness over distance.
You can activate the IR illuminator of your monocular by rotation the function swtch to position marked
IR. A red indicator light will appear when the IR illuminator is turned on.
VIDEO OUTPUT
Video output jack is designed to connect external recording devices or transmitting video signal to a
monitor. Attach signal receiver to the Video output jack and turn on the monocular.
4. IR940 LONG RANGE IR ILLUMINATOR OPTIONAL
The IR940 is a removable infrared illuminator that can be installed on the rail of the night vision unit for
the purpose of enhancing the unit’s performance and long distance observation.
IR940 ILLUMINATOR INSTALLATION
To install the IR illuminator on your Prime D, perform the following:
1) Install the Dovetail to Weaver Transfer Piece on the rail
of your monocular.
2) Loosen the screw on the IR940 mount.
3) Place the IR940 on the Weaver rail.
4) Tighten the screw.
IR ILLUMINATOR OPERATION
The Armasight IR940 runs on a single CR123A battery. To install the battery, unscrew the battery compartment cap and insert the battery in accordance with the unit’s polarity markings. Screw the battery
compartment cap back onto the device.
To turn the IR940 on, rotate its operation switch into the ON position.
Adjust the power of the beam emitted by the IR940. To change the brightness of the beam, rotate the
illuminator operation switch.
Focus the IR beam to change the eld of coverage. To focus the beam, slightly rotate the IR illuminator
lens.
To adjust the IR spot position in the eld of view, perform
the following:
1) Loosen the screw on the clamp of the IR illuminator
mount.
2) Turn on the sight and IR illuminator.
3) Carefully move the lens of IR940 up and down, as well as
side to side, and observe the IR spot position through the
eyepiece of the night vision weapon sight.
4) Tighten the screw of the clamp when the IR spot is focused in the center of the eld of view.
BEAM DI RECTION
ADJUSTMENT
DOVETAIL TO WE AVER
TRANSFE R PIECE
SCREW OF CL AMP
OPERATIO N SWITCH
BATTERY COMPART MENT
FOCUS ADJUS TMENT
FIXING SCR EW
7
5. MAINTENANCE PROCEDURES
The Prime D should always be stored in the supplied packaging, particularly in heated and ventilated
rooms. To keep the device operational, please follow the instructions listed below regarding preparations for storage. The battery should be stored separately from the unit and be inserted into the battery
compartment only when the device is being prepared for use. The presence of both acids and alkalis’
near the monocular is not recommended.
When stored, your Prime D should be protected from exposure to direct sunlight or extreme temperatures.
MONOCULAR CLEANING PROCEDURES
1) Gently remove any dir t from the monocular’s body using a clean, soft cloth.
2) Wipe external surfaces down (with the exception of optical surfaces) with a clean cloth moistened
with pure water.
3) Dry all wet surfaces with a dierent clean, dry cloth.
4) Carefully remove any dirt from the optical surfaces using a lens brush.
5) To avoid scratches, optical surfaces must be cleaned using a clean cotton swab that has been slightly dampened with pure alcohol. The glass should be wiped in circular motions starting from the center
and moving out towards the edge, without touching the barrel. Change the cotton swab as soon as it
becomes dirty.
PREPARATION FOR STORAGE
When preparing your Prime D for storage, perform the following steps:
1) Verify that the monocular is operating in accordance with all previously specied procedures.
2) Remove the batteries from the battery compartment.
3) Clean the monocular and all accessories.
4) Place all components into the storage case.
CAUTION:
Each component of the unit should be thoroughly dried before placing them into the storage
case.
6. TROUBLESHOOTING
Common problems that may occur with your monocular or the detection and viewing tests, as well as
actions you can take to correct them, are listed in the Troubleshooting Table, below. This table does
not list all of the malfunctions that may occur with your device. If you experience a malfunction of
the device that is not listed in this table, please contact Armasight or your Prime D retailer.
NOTE:
Before you use this table, be sure you have performed all normal operational safety, care and
handling checks and procedures. If you have a malfunction which is not listed in this table,
notify the next higher level of maintenance.
8
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE ACTION
The mono cular does not tur n on
If these act ions fail, turn in the d evice for unit level m aintenance.
Poor imag e quality
If the probl em persists, conta ct your service ce nter.
Light is vis ible through the ey ecup
Diopter ad justment cannot be pe rformed
IR illumin ator does not turn o n
Press the Powe r button. Press the Powe r button repea tedly.
Inspec t for a missing, defect ive or i mproper ly installed ba ttery.
Check i f the eye piece and l ens are fo cused.
Check if th e lens is g reasy, fog ged or
dir ty.
Check the e xit pupil dista nce value. Press the eye cup to your face.
Check the r esilience of the eye piece.
Check to see if the d iopter adjust ment
ring is def ormed or broken .
Turn the IR illumin ator on in a da rk area
with the monocu lar on. V isually es timate
if the obse rved scene is lig hted.
Replace the batte ry or in stall it p roperly.
Focus the o cular and lens.
Thorou ghly clean the s urface o f the
lens.
If the eyecup is de fective, cont act your
servi ce center.
If the dio pter adj ustment ring is damaged, con tact your ser vice center.
If the IR illu minator does not tu rn on,
contac t your service cen ter.
7. WARRANTY INFORMATION
Thi s produ ct is gu arante ed to be f ree fro m manuf actur ing def ects in ma terial and work mansh ip unde r norma l use for a
pe riod of tw o (2) ye ars f rom t he dat e of p urcha se. I n the e vent that a defe ct co vere d by th e bel ow wa rran ty oc curs duri ng
the a pplic able pe riod s tated a bove, Ar masigh t, at it s discr etion, will ei ther re pair or replac e the pro duct ; such ac tion o n
the p art of A rmasig ht shall be t he full e xtent of Armas ight’s liability, and the Cu stome r’s sole and exc lusive r eparat ion.
This warranty does not cover a product if it has (a) been used in ways other than its normal and customar y manner; (b)
subjected to misuse; (c) subjec ted to alterations, modifications or repairs by the Customer of by any par ty other than
Armasight without prior written consent of Armasight; (d) special order or “close-out” merchandise or merchandise sold
“as- is” by ei ther Ar masigh t or the A rmasi ght deal er; or (e ) mercha ndise t hat has b een di sconti nued by t he manu factu rer
and e ither parts or repl acemen t unit s are not availa ble due to reaso ns beyo nd the c ontrol of Arma sight. Armasi ght sha ll
not b e resp onsibl e for any defec ts or da mage th at in Ar masigh t’s vie w are a re sult fr om the mi shandl ing, ab use, mi suse,
improper storage or improper operation of the device, including use in conjunction with equipment that is electrically
or m echani cally i ncompa tible w ith, o r of infe rior qu ality to, the p roduc t, as we ll as fa ilure to mainta in the e nviron mental
conditio ns specif ied by the manufacturer. CUSTOMER IS HEREBY NOTIFIED THAT OPERATION OF THE EQUIPMENT DURING
DAYLIG HT HOU RS OR UN DER ANY E XCESSI VE LIGH T CONDI TIONS M AY PERMAN ENTLY DAM AGE THE I NTERN AL COMPO NE NT S O F T HE UN I T AN D S AI D D AM AG E W IL L N OT BE COV ER ED UN DE R T HI S W AR RA NT Y. Th is wa rr an ty is ex t en de d o nl y t o
the original purchaser. Any breach of this warrant y shall be enforced unless the customer notifies Armasight at the address
no ted b el ow wi thi n th e app lic abl e wa rra nty per iod .
The custom er unde rstan ds and a grees t hat exce pt for t he fore going w arran ty, no ot her war rantie s writ ten or or al, st atutory, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose, shall
apply to the product. All such implied warranties are hereby and expressly disclaimed.
LIMITATION OF LIABILITY
Arm asight w ill not be liab le for a ny claim s, act ions, su its, p rocee dings, costs, expen ses, da mages o r liabi lities arisin g out
of th e use of this pr oduct . Oper ation a nd use o f the pr oduct a re the s ole res ponsi bilit y of the C ustom er. Arma sight ’s sole
undertaking is limited to providing the products and services outlined herein in accordance with the terms and conditions
of th is Ag re em en t. Th e p ro vi si on of pr od uc t s s ol d a nd se rv ic es pe r fo rm ed by Ar ma si gh t t o t he C us to m er s ha ll no t b e i nt er preted, construed, or regarded, either expressly or implied, as being for the benefit of or creating any obligation toward
any third party of legal entity outside Armasight and the Customer; Armasight’s obligations under this Agreement extend
so lel y to the Cus tom er. A rma sig ht ’s li abi lit y he reu nd er f or da ma ges , re gar dle ss o f th e fo rm o r ac tio n, s hal l no t ex cee d th e
fee s or ot her cha rges p aid to A rmasi ght by t he cus tomer or cus tomer ’s deal er. Arm asigh t shall not, i n any eve nt, be liabl e
for special, indirect, incidental, or consequential damages, including, but not limited to, lost income, lost revenue, or lost
pr of i t, wh et he r s uc h d am ag es we re fo re se ea bl e o r n ot at th e ti m e of pu rc ha se , a nd wh et he r o r n ot su ch da ma ge s a ri se ou t
of a bre ach of wa rra nt y, a br eac h of agre em ent, neg lig enc e, s tri ct l iabi lit y or any othe r th eor y of lia bil ity .
9
PR ODU CT WA RR ANT Y RE GI STR ATIO N
In or der to v alidat e the war ranty on your p roduc t, Arma sight m ust receive a co mplete d Produ ct Warr anty R egistr ation
Car d for eac h unit, or the Cu stomer can com plete a warran ty reg istrat ion on o ur websi te, at w ww.ar masigh t.com. Please
co mpl ete t he i ncl ude d fo rm an d im med iat ely m ail it to our Ser vic e Ce nter :
Armasight Inc.
815 Dubuque Avenue
South San Francisco
CA 94080
Un ite d Sta tes o f Am eri ca.
OBTAINING WARRANTY SERVICE
To o bt ai n w ar ra nt y s er vi ce on yo ur u ni t, th e E nd -u se r (C us to me r) mu st n ot if y th e Ar ma si gh t s er vi ce de pa rt me nt vi a e mai l.
Sen d any req uests to serv ice@a rmasig ht.com t o recei ve a Ret urn Mer chandi se Auth orizat ion num ber (RM A). Whe n retur ning any device , pleas e take i n the pr oduct to your r etail er, or se nd the p roduc t, pos tage pa id and w ith a co py of you r
sa les rec eip t, t o Ar mas igh t Co rpo ra tio n’s s er vic e ce nte r at t he a dd res s lis te d ab ove . Al l me rch and ise mus t be ful ly i nsu red
wit h the cor rect p ostag e; Arma sight w ill not b e respo nsibl e for imp roper posta ge or me rchand ise tha t becom es lost or
damaged during shipment. When sending product back, please clearly write the RMA# on the outside of the shipping box.
Plea se incl ude a le tter th at indi cates yo ur RMA#, the Cust omer’s Name, a R eturn A ddress , reaso n for th e retur n, Conta ct
inf ormati on (val id tele phone n umber s and/or an e-m ail add ress), an d proo f of purc hase th at will h elp us t o estab lish th e
valid star t date of the warranty. Product merchandise returns that do not have an RMA# listed may be refused, or a significant delay in processing may occur. Estimate d Warrant y service time is 10-20 business days. The End-user/ Customer is
resp onsib le for p ostag e to Arma sight f or warr anty s ervic e. Arma sight w ill cove r retur n posta ge/ shi pping after w arran ty
rep air to th e End-u ser/ Cust omer on ly if th e produ ct is cov ered by t he afor ementi oned wa rrant y. Armas ight wil l retur n
the product after warranty service by domestic UPS Ground service and/ or domestic mail. Should any other requested,
re quir ed or i nter nati ona l ship pin g met hods be ne cess ary, the p ost age/ ship ping fee w ill b e the resp onsi bili ty o f the E nduser/ Customer.
10
ARMASIGHT PRODUCT WARRANTY REGISTRATION CARD
PRODUCT INFORMATION
CUSTOMER INFORMATION
Product Name
Purchase Date
Name
Purchased From
Product Serial #
Address
City
Day Phone #
E-mail address
Country Zip
Home Phone #
Customer Signature Required
11
FOR NOTE
Armasight Inc.
815 Dubuque Avenue,
South San Francisco, CA 94080
Phone: (888)959-2259
Fax: (888)959-2260
Intl Phone/Fax: (650)492-7755
info@armasight.com
CAUTION:
This product contains natural rubber latex
which may cause allergic reactions! FDA has
noted an increase in the number of deaths reported to the agency that are associated with an
apparent sensitivity to natural latex proteins. If
you are allergic to latex, it is a good idea to learn
which products contain it and strictly avoid exposure.
www.armasight.com
Loading...