Page 1
Label Picture Description QTY
A Umbrella Base 1
B Support Pole 1
Caution : You must read this before you proceed
Umbrella Base
Umbrella Base Weight : 88lbs
Reminder : Maximum diameter for open Umbrella - 86 inches
Page 1 OF 5
Page 2
C Adjustable Screw 1
D Adapter for 40mm Pole 1
E Adapter for 48mm Pole 1
F Adapter for 58mm Pole 1
G Wheel 4
Before
Beginning
Assembly:
WARNING: CHOKING HAZARD. Do not allow children to play with plastic wraps or any
small parts in this package.
Notice: As a safety precaution, when your Umbrella is not in use, please close the
Umbrella.
Remove Umbrella from this Base and store in safe location
ATTENTION: This Umbrella Base is exclusively recommended to be used together
under a table with the matching umbrella with diameter of 80 inches to 86 inches.
The matching Support Pole diameter: 40mm - 58mm.
Page 2 OF 5
Page 3
Screw Adjustable Screw(C) into Support Pole(B).
This Umbrella Base has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Umbrella Base parts, the above picture is to help you
put the various parts into perspective. Please read through the instructions below to
familiarise youself with the parts and steps before assembly.
This is a two person team assembly product.
Attach Wheels(G) to Umbrella Base(A) by inserting the threaded stem of the Wheels and turning clockwise
until secure. Press on the brake to make the base in a fixed position.
Then screw Support Pole(B) into Umbrella Base(A).
Step 2
Step 1
(G)
(G)
Adapter for 40mm Pole(D)
Page 3 OF 5
Page 4
Step 3 - A
Step 3 - B
Step 3 - C
Used for Umbrella Pole with 58mm diameter.
Insert Adapter for 58mm Pole(F) into the Support Pole(B).
Press on the brake to make the base in a fixed position.
Your Umbrella Base is ready for use.
This Umbrella Base only be used on a flat, level surface.
Used for Umbrella Pole with 48mm diameter.
Insert Adapter for 58mm Pole(F) into the Support Pole(B) first, then put the Adapter for 48mm Pole(E) into
the Adapter for 58mm Pole(F).
Press on the brake to make the base in a fixed position.
Your Umbrella Base is ready for use.
This Umbrella Base only be used on a flat, level surface.
Used for Umbrella Pole with 40mm diameter.
Insert Adapter for 58mm Pole(F) into the Support Pole(B) first, then put the Adapter for 48mm Pole(E) into
the Adapter for 58mm Pole(F). Finally, put the Adapter for 40mm Pole(D) into Adapter for 48mm Pole(E)
Press on the brake to make the base in a fixed position.
Your Umbrella Base is ready for use.
This Umbrella Base only be used on a flat, level surface.
Page 4 OF 5
Page 5
Page 5 OF 5
Loading...