Arlec UC0062 User Manual

Warranty

Arlec guarantees this product in accordance with the Australian Consumer Law.

Arlec also warrants to the original first purchaser of this product (“you”) from a retailer that this product
will be free of defects in materials and workmanship for a period of 12 months from the date of purchase;
provided the product is not used other than for the purpose, or in a manner not within the scope of the
recommendations and limitations, specified by Arlec, is new and not damaged at the time of purchase,
has not been subjected to abuse, misuse, neglect or damage, has not been modified or repaired without
the approval of Arlec and has not been used for commercial purposes (“Warranty”).

If you wish to claim on the Warranty, you must, at your own expense, return the product, and provide
proof of original purchase and your name, address and telephone number, to Arlec at the address below
or the retailer from whom you originally purchased the product within 12 months from the date of purchase.

Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in the above
manner and if, in Arlec’s reasonable opinion, the Warranty applies, Arlec will at its own option and
expense (or authorise the retailer to) replace the product with the same or similar product or repair the
product and return it to you or refund the price you paid for the product. Arlec will bear its own expenses
of doing those things, and you must bear any other expenses of claiming on the Warranty.

The Warranty is in addition to other rights and remedies you may have under a law in relation to the
product to which the Warranty relates.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.

4

Installation Instructions

slim line
bar light

Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.
Arlec’s telephone number, address and email address are:

Customer serviCe: [phone]

Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: [e-mail]

4

CPIN002535

LINKABLE

D

I

Y

UC0062

Important!

Please read these instructions carefully.
Due to continuous research and development the specifications

in here are subject to change without notice.

InstallatIon

Decide on a suitable location to mount
the light fitting. This product can be
either wall mounted or fixed to the
underside of a cabinet.

Do not mount the fitting in a position
where it may be subjected to excessive
heat or steam e.g. above cooktop.

Attach using the two screws
supplied. These must be secured
firmly in position. and be capable of
permanently supporting the weight
of the light fitting.

The modular light fittings can be linked together

to draw a maximum load of 250W (1A)

1 2

3

Max Total Load 250W (1A)

Linking Cable

Mounting Screw

Mounting Screw

safetY InformatIon

• This product is designed for
indoor use only.

• There are no user serviceable
parts. Repairs, including
replacement of supply flexible cord,
must only be performed by a
suitably qualified person.

• When linking lights together, do not
exceed 250W (1A) maximum load.

CabInet moUntIng

Care anD CleanIng

• Always switch off power before
cleaning.

• Clean the exterior with a damp
cloth, then wipe dry.

• Do not use abrasive cleansers
or solvents.

speCIfICatIons

Supply Voltage: 110-240V~

Frequency: 50-60Hz

Input: 4.5W (UC0061)
6W (UC0062)

Power Cable

32