Arkon TT125 User Manual

TT125 | Flexible Gooseneck Seat Bolt or Floor Mount for TomTom® GPS

CM088-TS-2 15” Flexible Floor Mount

APTTSE Adapter Plate for TomTom Start™ & Ease™

Check Comp atibilit y

Passenger Seat Bolt Mounting

APTTGO520 Adapter plate for TomTom GO x20, x30

Check Comp atibilit y

APTTO Adapter plate for TomTo m ONE

Check Comp atibilit y

APTTOXL Adapter plate for TomTom ONE XL and XL • S

Check Comp atibilit y

APTTEP Adapter Plate for EasyPort™

Check Comp atibilit y

For a simple mount that can be easily moved to another vehicle, install using the passenger seat track bolt.

Do not place mount in or near an air bag deployment zone or

where it will obstruct view of the road.

Step 1.

Step 2.

Screw the ﬂ exible steel shaft into the seat track bolt bracket.

With a socket wrench, loosen the passenger seat track bolt, insert the seat track bolt bracket, and retighten the seat track bolt.

Package Contents:

(1) CM088-TS-2 - 15” Flexible steel gooseneck ﬂ oor or console mount Includes: (1) Seat Bolt Bracket, (1) Floor / Console Bracket, (4) Screws, (4) Plastic Caps, and (1) Flexible Steel Shaft with Plastic Tubing (1) APTTO - Adapter plate for TomTom ONE™ Series (1) APTTOXL - Adapter plate for TomTom ONE XL™ and XL • S™ Series (1) APTTGO520 - Adapter plate for TomTom GO™ Series (1) APTTEP - Adapter plate for TomTom EasyPort pattern (1) APTTSE - Adapter plate for TomTom Start™ and Ease™

Required Tools for Installation:

1. Socket wrench

2. Drill and screwdriver for optional ﬂ oor or console mounting

TomTo m D evice Co mpati bilit y:

TomTom ONE 125 125-SE (TomTom EasyPort Mount) TomTom ONE 130, ONE 130-S ( TomTom EasyPort M ount) TomTom ONE 140, ON E 140-S ( TomTom EasyPort Mount) TomTom XL 325, XL 325-S, XL 325-SE (TomTom EasyPort M ount) TomTom XL 330, XL 330 -S (TomTom EasyPor t Mount) TomTom XL 335 Serie s (TomTom EasyPor t Mount) TomTom XL 340 , XL 340-S, XL 340 LIV E Series (TomTom EasyPort Mou nt) TomTom XL 350 Seri es (TomTom EasyPor t Mount) TomTom XXL 530 -S, XXL 535-T, XXL 540-S/WTE, X XL 550 Seri es (TomTom EasyPor t Mount) TomTom ONE (US Edi tion, US 3rd Edition) TomTom ONE XL (1st Editi on) - TomTom ONE XL-S (1st Edition) TomTom ONE 22, ONE 22 Regi onal, ONE 22 Regional Traﬃ c TomTom XL 22, XL 22 R egional (TomTom EasyPort Mount) TomTom ONE UK / EU ROPE (NEW Edition aka 2n d Edition, 3rd Edition) TomTom GO 520 / 530 / 630 / 720 / 730 / 920 / 920T / 930 TomTom Star t and Ease

TomTom, ONE, GO, and EasyPort, Start and Ease are product names, trademarks, or registered trademarks of TomTom International NV. Arkon Resources, Inc. is not aﬃ liated with TomTom International NV.

Step 1.

Step 2.

Position the Floor/Console Bracket and drill into the ﬂ oor or console.

Attach the Floor / Console Bracket with screws and cover with plastic caps.

Step 3.

Screw the steel shaft into the Floor / Console Bracket.

Console Mount

Floor or Console Mounting

For a more permanent mount, connect the Floor / Console Mount Bracket to the ﬂ oor or console. This will require drilling into your vehicle’s interior surface.

Drilling into the dash, ﬂ oor, or console will permanently damage

the vehicle. Use caution and consult a mobile install professional to avoid drilling into the gas tank, electrical system or other highly sensitive vehicle components.

Continued on next column... Continued on other side...

Safety Precautions

Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or air bag deployment.

Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.

Pedestal Head Adjustments

Step 1.

Adjust the steel shaft by bending with both hands to the desired location of the male dual T head.

Step 2.

Use the adjustment knob and wing nut on the pedestal head to swivel or rotate the head position if necessary.

Consumer Hotline:

USA (800) 841-0884 INT’L (626) 254-9005

Monday - Frid ay 9 am - 5 pm, PST

Floor Mount

The Mobile Mounting Specialists™

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in China and Taiwan

TT125 | Flexible Gooseneck Seat Bolt or Floor Mount for TomTom® GPS

TomTom ONE, ONE XL, or XL • S Adapter Plate and Device

Attachment

Step 1.

Slide the adapter plate (D) up into the grooves on the back of the TomTom ONE, ONE XL, or ONE XL • S device (E).

TomTom GO Adapter Plate and Device Attachment

Slide the adapter plate (D) up into the grooves on the back of the TomTom GO 520, 530, 630, 720, 730, 920, 920T, and 930 models device (E).

Step 2. While holding the mounted adapter plate, gently insert the

device (not included, sold separately) into the adapter plate until an audible click is heard. The device can then be rotated into the desired viewing angle.

TomTom Start & Ease Device Installation - Pedestal Attachment

Step 1.

Attach the TomTom dual-T adapter plate to the mount by inserting the dual-T tabs of the pedestal (A) into the dual T-slots on the adapter plate (B).

Step 2.

Step 1. Connect the dual T-slots (A) on the back of the adapter plate

Attach the device to the pedestal by inserting the dual T-slots on the adapter plate (F) to the dual-T tabs on the mount head (G).

TomTom EasyPort Adapter Plate and Device Attachment

to the dual T-tabs (B) on the mount pedestal head.

Continued on next column...

Step 2.

While holding the mounted TomTom adapter plate, gently insert the TomTom device (not included, sold separately) into the adapter plate until an audible click is heard.

Safety Precautions

Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.

The Mobile Mounting Specialists™

Consumer Hotline:

USA (800) 841-0884 INT’L (626) 254-9005

Monday - Frid ay 9 am - 5 pm, PST

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in China and Taiwan