Arkon SM221 User Manual

SM221 & CM921 Lighter Socket with Power Adaptor Phone or PDA Mount

SM221

CM097

-Also available with dual T-head configuration
CM097-2

(A)

(D)

12V Powering
Outlet socket

SM020

SM020-2

CM921

CM097

-Also available with dual T-head configuration

CM097-2

(E)

CM090

CM090-2

(B) (C)

Installation Instructions

Step 1.

Insert the DC Power plug (A) completely into the vehicle's
12V/lighter socket.

Step 2.

Adjust the angle of the pedestal arm by loosening/tightening
the wing nuts (B) to the desired placement angle.

Step 3.

Attach your cradle or device to the pedestal by inserting the
single T-tab (C) into the T-slot (D). Adjust the angle and rotation
of the head by loosening/tightening the wing nuts (B).

(F)

Universal Cradle Instructions

Step 1.

Step 2.

Step 3.

If necessary, adjust the support legs (G) by sliding them
laterally. These provide support for your device.

Place device on the support legs (G) and squeeze the side
grip arms (E) until they t securely to the device.

Push the release button (F) in order to release the device
from the cradle.

(G)

Safety Precautions

Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi­bility of liability for injury or death as a result of car crashes and/or
air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to
your car, your device, or yourself due to the installation or use of the
pedestal mount.

Consumer Hotline:
(USA) [phone]
(INT'L) [phone]
Mon-Fri. 9am-5pm, PST

The Mobile Mounting Specialists

Arcadia, CA 91006 USA

© Copyright 2007 Arkon Resources, Inc.

TM

www.arkon.com

Made in Taiwan