Arkon BBP125-S, PTM125-S User Manual
PTM125-S BBP125-S | 15” Flexible Steel Gooseneck Mount
CC002- Palm CC003 -BBP
CM088 -TS-2 15” Flexibl e Steel “Goosene ck” Mount
(shown wit h Seat Bolt Bracke t attached)
Package Contents:
(1) Seat Bolt Bracket
(1) Floor / Console Bracket
(1) Flexible Steel Shaft with Plastic Tubing
(1) Dual T Pattern Head
(3) Screws
(4) Plastic Caps
(1) Custom Cradle (CC002-Palm or CC003-BBP)
NOTES:
1. Tool for Seat Bolt mounting - socket wrench
2. Tools for optional Floor or Console mounting
- drill and screwdriver
3. Do not twist the cradle or device while
mounted on top of the pedestal to adjust the
steel shaft as this can break the dual T grooves.
Installation Instructions
Passenger Seat Bolt Mounting
For a simple mount that can be easily moved
to another vehicle, install using the passenger
seat bolt (no drilling required).
Step 1. Screw the exible steel shaft into the
Seat Bolt Bracket.
Compatability: (not complete)
- Palm Treo 650 - HP iPAQ 6815 - XDA Adom Exec
- Palm Treo 680 - HP iPAQ 6818 - Dopod 818 Pro
- Palm Treo 700W - HP iPAQ 6828 - Dopod 810
- Palm Treo 700P - HTC P3600 - Pharos GPS 525P
- Palm Treo 750 - HTC 6815 - i-Mate JAMin
Step 2.
With a socket wrench, loosen the
passenger seat bolt, insert the Seat Bolt
Bracket, and retighten the seat bolt.
Safety Precautions
!
Drilling onto the oor or console can
permanently damage the vehicle. Use
caution and consult a mobile install
professional to avoid drilling into the gas
tank, electrical system or other highly
sensitive vehicle components.
Arkon Resources, Inc. is not responsible for
any damages caused to your car or yourself
due to the install of the pedestal mount.
Floor or Console Mounting
For a more permanent mount, connect the
Floor / Console Mount Bracket to the oor or
console. This will require drilling into your
vehicle’s interior surface.
Compatability:
Blackberry Pearl 8100
Step 1.
Position the Floor / Console
Bracket and drill into the oor or
console.
Step 2.
Attach the Floor / Console Bracket
with screws and cover with plastic
caps.
Step 3.
Screw the steel shaft into the Floor
/ Console Bracket.
Seat Bolt Bracket
Pedestal Head Adjustments
Adjust the steel shaft by bending with
Step 1.
both hands to the desired location of the
male dual T-head.
Use the adjustment knob (A) and wing
Step 2.
nut (B) on the pedestal head to swivel or
rotate the head position if necessary.
Align the female dual T-slots on the
Step 3.
cradle to the dual T-tabs on the pedestal
head. Insert device.
Safety Precautions
!
Drilling onto the oor or console can permanently damage the
vehicle. Use caution and consult a mobile install professional to
avoid drilling into the gas tank, electrical system or other highly
sensitive vehicle components.
Arkon Resources, Inc. is not responsible for any damages caused to
your vehicle, your device, or yourself due to the installation or use
of this product.
Threaded Flexible
Steel Shaft
(A)
(B)
Console Mount
Floor Mount
Connecting the cradle
Slide the T-slots of the cradle onto
the T-tabs of the mount head.
The Mobile Mounting Specialists™
Consumer Hotline:
(USA) (800) 841-0884
(INT’L) (626) 254-9005
Mon-Fri. 9am-5pm, PST
© Copyright 2007 Arkon Resources, Inc.
www.arkon.com
Arcadia, CA 91006 USA
Made in Taiwan
Loading...