Arkon SM225-S, CM925-S User Manual
CM925-S SM225-S | 15” Flexible Steel Gooseneck Mount
CM088 -TS-2 15” Flexibl e Steel “Goosene ck” Mount
(shown wit h Seat Bolt Bracke t attached)
CM090 SM020
Package Contents:
(1) Seat Bolt Bracket
(1) Floor / Console Bracket
(1) Flexible Steel Shaft with Plastic Tubing
(1) Dual T Pattern Head
(3) Screws
(4) Plastic Caps
(1) Custom Cradle (CM090 or SM020)
NOTES:
1. Tool for Seat Bolt mounting - socket wrench
2. Tools for optional Floor or Console mounting
- drill and screwdriver
3. Do not twist the cradle or device while
mounted on top of the pedestal to adjust the
steel shaft as this can break the dual T grooves.
Installation Instructions
Passenger Seat Bolt Mounting
For a simple mount that can be easily moved
to another vehicle, install using the passenger
seat bolt (no drilling required).
Step 1. Screw the exible steel shaft into the
Seat Bolt Bracket.
Seat Bolt Bracket
Threaded Flexible
Steel Shaft
Step 2.
With a socket wrench, loosen the
passenger seat bolt, insert the Seat Bolt
Bracket, and retighten the seat bolt.
Safety Precautions
!
Drilling onto the oor or console can
permanently damage the vehicle. Use
caution and consult a mobile install
professional to avoid drilling into the gas
tank, electrical system or other highly
sensitive vehicle components.
Arkon Resources, Inc. is not responsible for
any damages caused to your car or yourself
due to the install of the pedestal mount.
Floor or Console Mounting
For a more permanent mount, connect the
Floor / Console Mount Bracket to the oor or
console. This will require drilling into your
vehicle’s interior surface.
Console Mount
Floor Mount
Step 1.
Step 2.
Step 3.
Position the Floor / Console Bracket and
drill into the oor or console.
Attach the Floor / Console Bracket with
screws and cover with plastic caps.
Screw the steel shaft into the Floor
/ Console Bracket.
Pedestal Head Adjustments
Adjust the steel shaft by bending with
Step 1.
both hands to the desired location of the
male dual T-head.
Use the adjustment knob (A) and wing
Step 2.
nut (B) on the pedestal head to swivel or
rotate the head position if necessary.
Align the female dual T-slots on the
Step 3.
cradle to the dual T-tabs on the pedestal
head. Insert device.
Safety Precautions
!
Drilling onto the oor or console can permanently damage the vehicle.
Use caution and consult a mobile install professional to avoid drilling
into the gas tank, electrical system or other highly sensitive vehicle
components.
Arkon Resources, Inc. is not responsible for any damages caused to
your car or yourself due to the installation or use of the pedestal mount.
(A)
(B)
Connecting the cradle
Slide the T-slots of the cradle onto
the T-tabs of the mount head.
The Mobile Mounting Specialists™
Consumer Hotline:
(USA) (800) 841-0884
(INT’L) (626) 254-9005
Mon-Fri. 9am-5pm, PST
© Copyright 2007 Arkon Resources, Inc.
www.arkon.com
Arcadia, CA 91006 USA
Made in Taiwan
Loading...